AUTOMOTIVE Line Drivers & Receivers 1,061

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN65LVDS86AQDGGG4	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100		EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	125 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified	.025 Amp	TRUE	3		NO	e4	30	260	12.5 mm		7 ns
SN65HVD10QDG4	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS		16 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	125 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	1	SIGNALING RATE 32 MBPS	YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	25 ns
THVD8010DDFR	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				30 ns	EIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.11				3 V	.65 mm	125 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.1 mm	1.6 mm		4 Amp	TRUE	1		YES	e3	30	260	2.9 mm	1.5 V	8 ns
SN65MLVD204BRUMT	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				3.5 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25			.00001 Amp	3 V	.65 mm	125 Cel		DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	1	.8 mm	4 mm		8 Amp	COMPLEMENTARY	1	ESD Value for A, B Pins is 3B	YES	e4	30	260	4 mm	.48 V	10 ns
SN65HVS881PWPR	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	34 V	1		CMOS		10 ns	GENERAL PURPOSE	8.7 mA	SCHMITT TRIGGER	12 V	34 V	10/34	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	10 V	Line Driver or Receivers		10 V	.65 mm	125 Cel	12 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	2	1.2 mm	4.4 mm	Not Qualified		TRUE	1		NO	e4	30	260	9.7 mm	4 V	14 ns
V62/05604-02XA	Texas Instruments		AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				BICMOS				15.5 mA		3.3 V		3.3	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.0001 Amp		1.27 mm	125 Cel			-40 Cel	1		DUAL	R-PDSO-G8					8 Amp				YES					1.5 V	70 ns
THVD1550D	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				16 ns	EIA-485-A; TIA-485-A	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V		SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.895 mm				1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	4.905 mm		45 ns
DS90LV011AHMF	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		1.5 ns	EIA-644-A; TIA-644-A		STANDARD	3.3 V		3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		Line Driver or Receivers	.00001 Amp	3 V	.95 mm	125 Cel		3-STATE	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G5	1	1.45 mm	1.6 mm	Not Qualified					YES	e0		260	2.92 mm	.25 V	0 ns
SN65LVDM051QDQ1	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	AEC-Q100	3 ns	EIA-644; TIA-644	27 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	125 Cel	3.3 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		2		YES	e4	30	260	9.9 mm	.247 V	4.5 ns
SN65LVDS86AQDGG	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	125 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE	3		NO	e4	30	260	12.5 mm		7 ns
DS90LV027AHM	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				2 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	125 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					YES	e0	20	235	4.9 mm	.25 V	0 ns
SN65LBC176QDREP	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		31 ns	EIA-485-A; TIA-485-A; ISO 8482		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.75 V	1.27 mm	125 Cel			-40 Cel	1		DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1	COMMON I/O: TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		37 ns
PTHVD1426DR	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				35 ns	EIA-485-A; TIA-485-A	3 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE	SOP8,.25				3 V	1.27 mm	125 Cel		DIFFERENTIAL	-40 Cel	1		DUAL	R-PDSO-G8		1.75 mm	3.895 mm			COMPLEMENTARY	1	ALSO OPERATES AT 5V NOM	YES				4.905 mm	1.5 V	75 ns
SN65LVDT41QPWREP	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		3.9 ns	EIA-644-A; TIA-644-A	35 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	125 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	6.5 mm	.247 V	4.8 ns
SN65LVDS84AQDGGREP	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644		STANDARD	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	125 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified					YES	e4			12.5 mm
SN65LVDS84AQDGGR	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	39 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	125 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.5 mm		0 ns
SN65HVD01DRC	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	10	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				1200 ns	EIA-485		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	3.6 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	125 Cel	3.3 V		-40 Cel	1		DUAL	S-PDSO-N10		1 mm	3 mm				1		YES				3 mm		90 ns
V62/05604-01XA	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS	MIL-STD-883	16 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	125 Cel	3.3 V	3-STATE	-40 Cel	1		DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES		NOT SPECIFIED	NOT SPECIFIED	4.9 mm	1.5 V	25 ns
DS90LV027AHM/NOPB	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				2 ns	EIA-644; TIA-644	20 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	125 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4.9 mm	.25 V	0 ns
V62/05604-01XE	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS		16 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	125 Cel	3.3 V	3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	1.5 V	25 ns
DS90LV027AHMX/NOPB	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				2 ns	EIA-644; TIA-644	20 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	125 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4.9 mm	.25 V	0 ns
SN65HVD11QDREP	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS		40 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	125 Cel			-40 Cel	1		DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES				4.9 mm	1.5 V	70 ns
AM26C31QDREP	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V			SMALL OUTLINE					4.5 V	1.27 mm	125 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified					YES	e4			9.9 mm
SN65LBC179QDREP	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		18 ns	EIA-485; ISO 8482	7 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.75 V	1.27 mm	125 Cel		TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY	1		YES	e4			4.9 mm		30 ns
V62/05615-02XE	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		3.9 ns	EIA-644-A; TIA-644-A	35 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	125 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	6.5 mm	.247 V	4.8 ns
SN65LVDM050QDRG4Q1	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	AEC-Q100	3 ns	EIA-644; TIA-644	27 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	125 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	2		YES	e4	30	260	9.9 mm	.247 V	4.5 ns
SN65HVD76D	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				16 ns	EIA-485	1.1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V		SMALL OUTLINE		3 V			3 V	1.27 mm	125 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.75 mm	3.9 mm				1		YES	e4	NOT SPECIFIED	260	8.65 mm		40 ns
SN65LVDM050QDQ1	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	AEC-Q100	3 ns	EIA-644; TIA-644	27 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	125 Cel	3.3 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		2		YES	e4	30	260	9.9 mm	.247 V	4.5 ns
SN65LBC176QJG	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1		BICMOS		31 ns	EIA-485; ISO 8482	3.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	IN-LINE	DIP8,.3		Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	125 Cel			-40 Cel	1		DUAL	R-GDIP-T8				Not Qualified	8 Amp		1	COMMON I/O: TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES		NOT SPECIFIED	NOT SPECIFIED		1.1 V	37 ns
SN65MLVD204BRUMR	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				3.5 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25			.00001 Amp	3 V	.65 mm	125 Cel		DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	1	.8 mm	4 mm		8 Amp	COMPLEMENTARY	1	ESD Value for A, B Pins is 3B	YES	e4	30	260	4 mm	.48 V	10 ns
SN65LVDS86ADGGRQ1	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		EIA-644; TIA-644		DIFFERENTIAL	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	125 Cel			-40 Cel			DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified			3		NO				12.5 mm		7 ns
SN65LVDS84AQDGG	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	39 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	125 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.5 mm		0 ns
SN65HVD11QP	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	3.6 V	1		BICMOS		40 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	IN-LINE	DIP8,.3		Line Driver or Receivers	.0001 Amp	3 V	2.54 mm	125 Cel			-40 Cel	1		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp		1	SIGNALING RATE 10 MBPS	YES		NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	70 ns
THVD1512D	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				500 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V		125 Cel			-40 Cel	1		DUAL	R-PDSO-G14							1		YES						60 ns
SN65HVS881PWP	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	34 V	1				10 ns	GENERAL PURPOSE	8.7 mA	SCHMITT TRIGGER	12 V	34 V	10/34	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	10 V	Line Driver or Receivers		10 V	.65 mm	125 Cel	12 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	2	1.2 mm	4.4 mm	Not Qualified		TRUE	1		NO	e4	30	260	9.7 mm	4 V	14 ns
SN65LVDM050QDRQ1	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	AEC-Q100	3 ns	EIA-644; TIA-644	27 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	125 Cel	3.3 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		2		YES	e4	30	260	9.9 mm	.247 V	4.5 ns
AM26C31QDBR	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	125 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G16		2 mm	5.3 mm	Not Qualified					YES				6.2 mm	2 V	0 ns
AM26C32QDREP	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V	1.27 mm	125 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified			4		NO	e4			9.9 mm		27 ns
SN65LVDM050QDG4Q1	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	AEC-Q100	3 ns	EIA-644; TIA-644	27 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	125 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	2		YES	e4	30	260	9.9 mm	.247 V	4.5 ns
DS90LV011AHMFX	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		1.5 ns	EIA-644-A; TIA-644-A		STANDARD	3.3 V		3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		Line Driver or Receivers	.00001 Amp	3 V	.95 mm	125 Cel		3-STATE	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G5	1	1.45 mm	1.6 mm	Not Qualified					YES	e0		260	2.92 mm	.25 V	0 ns
DS90LV028AQMA	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V			SMALL OUTLINE					3 V	1.27 mm	125 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G8	1		3.9 mm	Not Qualified			2			e0	30	235	4.9 mm		2.5 ns
SN65LVDS84ADGGRQ1	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS	AEC-Q100		EIA-644; TIA-644	39 mA	STANDARD	3.3 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified					YES				12.5 mm		0 ns
SN65LVDS86AQDGGREP	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1					EIA-644; TIA-644		DIFFERENTIAL	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	125 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified			3		NO	e4			12.5 mm		7 ns
THVD1512DR	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				500 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V		125 Cel			-40 Cel	1		DUAL	R-PDSO-G14							1		YES						60 ns
V62/05615-01XE	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		3.9 ns	EIA-644-A; TIA-644-A	25 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	125 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	8 Amp	TRUE	4		YES	e4	30	260	6.5 mm	.247 V	4.8 ns
SN65LVDM051QDG4Q1	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	AEC-Q100	3 ns	EIA-644; TIA-644	27 mA	DIFFERENTIAL	3.3 V		3.3	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	125 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		2		YES	e4	30	260	9.9 mm	.247 V	4.5 ns
DS90LV028AQDQFTQ1	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	AEC-Q100		EIA-644; TIA-644		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, VERY THIN PROFILE					3 V	.5 mm	125 Cel			-40 Cel		Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-N8	1	.8 mm	2 mm				2		NO	e4	30	260	2 mm		2.5 ns
SN65HVDA1040BQDRQ1	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	1		AEC-Q100	120 ns	ISO 11898-2; ISO 11898-5		SCHMITT TRIGGER	5 V	5.25 V		SMALL OUTLINE		4.75 V			4.75 V	1.27 mm	125 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.895 mm				1		YES	e4	30	260	4.905 mm		130 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.