INDUSTRIAL Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
HI-8445PSIF	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			ARINC 429	10 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		Matte Tin (Sn)	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	5 Amp		4		YES	e3	40	260	6.5 mm		0 ns
MAX3232EETE	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	2	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.2SQ,32		Line Driver or Receivers		3 V	.8 mm	85 Cel			-40 Cel	2	TIN LEAD	QUAD	S-XQCC-N16	1	.8 mm	5 mm	Not Qualified	1.6 Amp		2		NO	e0			5 mm	10 V	0 ns
MAX3232EETE+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	2	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.2SQ,32		Line Driver or Receivers		3 V	.8 mm	85 Cel			-40 Cel	2	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	1	.8 mm	5 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	5 mm	10 V	0 ns
SN65HVD21DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		60 ns	EIA-485-A; TIA-485-A	12 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	.1 Amp	TRUE	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.8 V	50 ns
SN65HVD21DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		60 ns	EIA-485-A; TIA-485-A	12 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	1.8 V	50 ns
SN65HVD1786P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1			200 ns	EIA-485; TIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	200 ns
SN65HVD20DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		20 ns	EIA-485-A; TIA-485-A	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	.1 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.8 V	35 ns
ADM213EARUZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO	e3		260	9.7 mm	10 V	2000 ns
DS90LV032ATMX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	.02 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	2 Amp	TRUE	4		NO	e3	30	260	9.9 mm	.25 V	3.3 ns
HI-8444PSIF-10	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			ARINC 429	10 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		Matte Tin (Sn)	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	5 Amp		4		YES	e3	40	260	6.5 mm		0 ns
MAX3078EESA-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	BICMOS		50 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e0	20	240	4.9 mm	1.5 V	75 ns
MAX3078EESA+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	BICMOS		50 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	4.9 mm	1.5 V	75 ns
SP232EEN-L/TR	Exar	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		3000 ns	EIA-232-D; V.28	5 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	2	Matte Tin (Sn)	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	3.2 Amp		2		NO	e3	40	260	9.9 mm	10 V	1000 ns
ADM485AR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		15 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O; TRISTATABLE RECEIVERS	YES	e0		240	4.9 mm	1.5 V	40 ns
DS90UB941ASRTDRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	4		AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	1.1 V	1.89 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.045 V	.5 mm	105 Cel	1.8 V		-40 Cel	4	NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N64	3	.9 mm	9 mm					ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.71 TO 1.89 V	YES	e4	30	260	9 mm
ISL3259EIUZ-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	2	1.1 mm	3 mm				1		YES	e3	30	260	3 mm		13 ns
ISO3080DWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			1.3 ns	EIA-422; TIA-422; EIA-485; TIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5,5	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	10.3 mm	1.5 V	125 ns
SN65LVDS31PWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified		TRUE			YES	e4	NOT SPECIFIED	260	5 mm	.247 V	0 ns
DS90LV019TMTC	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		7 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.2 mm	4.4 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	CAN ALSO OPERATE WITH A 5V SUPPLY	YES	e0		260	5 mm	.25 V	9 ns
ISL32432EIBZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		1000 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	2	1.75 mm	3.9 mm				1	ALSO OPERATES WITH SUPPLY VOLTAGE RANGE 4.5 AND 5.5V	YES	e3	30	260	4.9 mm		325 ns
MAX13433EESD+T	Analog Devices		INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		50 ns	EIA-485; TIA-485	2 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V	1.8/5,3.3/5	SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers		1.62 V	1.27 mm	85 Cel	5 V		-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	8.65 mm	1.5 V	80 ns
SN65LVDT41PWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2.9 ns	EIA-644-A; TIA-644-A	35 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	6.5 mm	.247 V	3.8 ns
DS34C87TMX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		11 ns	EIA-422	.5 mA	STANDARD	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		TRUE			YES	e3	30	260	9.9 mm		0 ns
LTC2864IS-1#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.752 mm	3.899 mm				1		YES	e3	30	260	8.649 mm		65 ns
MAX3160EEAP/GG8	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		800 ns	EIA-422; EIA-485	5.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, SHRINK PITCH	SSOP20,.3			.00025 Amp	3 V	.65 mm	85 Cel		DIFFERENTIAL	-40 Cel	1		DUAL	R-PDSO-G20	1	1.99 mm	5.29 mm		2.5 Amp	COMPLEMENTARY	1	IT CAN BE PROGRAMMABLE AS RS-232 INTERFACE 2TX/2RX TRANSCEIVER	YES				7.2 mm	1.5 V	150 ns
ADM3202ARN-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		1200 ns	EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	1.6 Amp		2		NO	e0		240	9.9 mm	5 V	1000 ns
AM26LV32IDRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	5 Amp		4		NO	e4	30	260	9.9 mm		20 ns
MAX3243EIPWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3				EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	5 V		-40 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	5	ALSO OPERATES AT 5V SUPPLY	NO	e4	NOT SPECIFIED	260	9.7 mm	10 V	150 ns
ISL32452EIUZ-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		1000 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm				1		YES	e3	30	260	3 mm		325 ns
LTC2801IDE#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	12	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		2000 ns	EIA-232-F; TIA-232-F		SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					1.8 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-N12	1	.8 mm	3 mm	Not Qualified			1		NO	e3	30	260	4 mm		400 ns
MAX13433EESD+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		50 ns	EIA-485; TIA-485	2 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V		1.8/5,3.3/5	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		1.62 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	8.65 mm	1.5 V	80 ns
MAX1480BEPI	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		3000 ns	EIA-422; EIA-485	45 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	IN-LINE	DIP28,.6		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T28	1	5.08 mm	15.24 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0			36.83 mm	1.5 V	3000 ns
MAX1480BEPI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	HYBRID		3000 ns	EIA-422; EIA-485	45 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	IN-LINE	DIP28,.6		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T28	1	5.08 mm	15.24 mm	Not Qualified			1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e3	30	260	36.83 mm	1.5 V	3000 ns
MAX3221EEAE/GG8	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, SHRINK PITCH	SSOP16,.3				3 V	.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G16	1	1.99 mm	5.29 mm		1.6 Amp		1		NO				6.2 mm	10 V
SN65HVD3085EDGKR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		500 ns	EIA-485-A; TIA-485-A	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	.65 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	3 mm	1.5 V	200 ns
ADM211EARUZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO	e3		260	9.7 mm	10 V	2000 ns
DS92LV16TVHGX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.45 V	1	CMOS			GENERAL PURPOSE	320 mA	DIFFERENTIAL	3.3 V	3.45 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	3.15 V	Line Driver or Receivers		3.15 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G80	3	1.5 mm	12 mm	Not Qualified			1		YES	e3	30	260	12 mm		0 ns
LTC2855IGN#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, SHRINK PITCH					3 V	.635 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.899 mm	Not Qualified			1		YES	e3	30	260	4.8895 mm		70 ns
SN65LBC172A16DWRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482		STANDARD	5 V		5	SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified					YES	e4	30	260	10.3 mm	1 V	0 ns
P82B96DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	BIPOLAR			GENERAL PURPOSE	2 mA	STANDARD	5 V	15 V	2/15	SMALL OUTLINE	SOP8,.25	2 V	Other Interface ICs		2 V	1.27 mm	85 Cel	2.5 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			2		NO	e4	NOT SPECIFIED	260	4.9 mm		0 ns
SN65MLVD201DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2.4 ns	EIA-899; TIA-899	26 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	.01 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	.48 V	6 ns
AM26C31IPW	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3 mA	STANDARD	5 V	5.5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	20 Amp				YES	e4	30	260	5 mm	2 V	0 ns
DS90UB949TRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100			330 mA			1.89 V	1.1,1.8	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm	1.197 V
LTC2862AIS8-1#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8		1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
LTC2871IUHF#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	38	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		70 ns	EIA-232; EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.7 V	.5 mm	85 Cel	3.3 V		-40 Cel	3	Matte Tin (Sn) - annealed	QUAD	R-PQCC-N38	1	.8 mm	5 mm	Not Qualified			3		YES	e3	30	260	7 mm		200 ns
SN65C1167EPWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			16 ns	EIA-422-B; TIA-422-B; V.11	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	85 Cel	5 V	3-STATE	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	20 Amp	TRUE	2		YES	e4	30	260	5 mm	2 V	27 ns
SN65HVD1785P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1			2000 ns	EIA-485; TIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	200 ns
SN65HVD3085EDR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		500 ns	EIA-485-A; TIA-485-A	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	200 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.