INDUSTRIAL Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
XR3160EIUTR-F	Exar	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				1000 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	2	2 mm	5.3 mm				2	RS-232 IS SINGLE ENDED INPUT	YES	e3			7.2 mm		150 ns
AD2426WCCSZ01	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.98 V	1		DMOS	AEC-Q100			12 mA	STANDARD	1.9 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20				1.7 V	.5 mm	105 Cel		OPEN-DRAIN	-40 Cel	1		QUAD	S-XQCC-N32		.8 mm	5 mm		1.5 Amp		1		YES				5 mm
ADM3312EARUZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS			EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		Line Driver or Receivers		2.7 V	.65 mm	85 Cel			-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G24	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		3		NO	e3		260	7.8 mm	10 V	1000 ns
AM26C31IPWRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	20 Amp				YES	e4	30	260	5 mm	2 V	0 ns
FUSB2805MLX	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	1				20 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.6 V		2.7/4.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32	1	.8 mm	5 mm	Not Qualified	4 Amp		1		YES	e4	30	260	5 mm	2.5 V	20 ns
MAX3221EIDBRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1					EIA-232-F; TIA-232-F; V.28	.01 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	1	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	6.2 mm	10 V	150 ns
MAX481EPA	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		CMOS		60 ns	EIA-422; EIA-485	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.001 Amp	4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T8	1	4.572 mm	7.62 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e0			9.375 mm	1.5 V	200 ns
MAX481EPA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		CMOS		60 ns	EIA-422; EIA-485	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T8	1	4.572 mm	7.62 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e3	30	260	9.375 mm	1.5 V	200 ns
SN65C3232EDBRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				300 ns	EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	2	ALSO OPERATES WITH 5V SUPPLY	NO	e4	NOT SPECIFIED	260	6.2 mm	10 V	300 ns
SN65LVDS180PWRG4Q1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	AEC-Q100	2.7 ns	EIA-644; TIA-644	12 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.2 mm	4.4 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	5 mm	.247 V	4.5 ns
SN65LVDS180PWRQ1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	AEC-Q100	2.7 ns	EIA-644; TIA-644	12 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.2 mm	4.4 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	5 mm	.247 V	4.5 ns
SN65LVDS34DRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BICMOS			EIA-644; TIA-644	12 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	4.4 mm	Not Qualified	4 Amp	TRUE	2		NO	e4	30	260	4.9 mm		6 ns
ADM1486ARZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		17 ns	EIA-422; EIA-485	2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e3	40	260	4.9 mm	2.1 V	20 ns
ADM2861EBRNZ-RL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				400 ns	RS-485; RS-422	53 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH	SSOP28,.4				3 V	.65 mm	105 Cel			-40 Cel	1		DUAL	R-PDSO-G28		2.65 mm	7.5 mm		2 Amp	COMPLEMENTARY	1		YES		NOT SPECIFIED	NOT SPECIFIED	10.3 mm	1.5 V	200 ns
DS90LV031ATM/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2 ns	EIA-644; TIA-644; IEEE 1596.3		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	.01 Amp	TRUE			YES	e3	30	260	9.9 mm	.25 V	0 ns
ISL83078EIUZA-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	2	1.1 mm	3 mm				1		YES	e3	30	260	3 mm		60 ns
LTC485IS8	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		CMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY	1	COMMON I/O; TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e0	20	235	4.9 mm		200 ns
SN65LBC176DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		25 ns	EIA-485-A; TIA-485-A; ISO 8482	3.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	COMMON I/O: TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4	30	260	4.9 mm	1.1 V	33 ns
SP336EEY-L/TR	Exar		INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES								30 mA				3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers			.635 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1			Not Qualified	2.5 Amp				YES	e3				10 V	0 ns
ADM3491ARZ-1	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS		70 ns	EIA-422; EIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE	SOP14,.25				3 V	1.27 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm			TRUE	1		YES	e3	30	260	8.65 mm		115 ns
HI-8585PDIF	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	16.5 V	1		CMOS			ARINC 429		STANDARD	15 V		+-12/+-15	-15 V	IN-LINE	DIP8,.3		Line Driver or Receivers		11.4 V	2.54 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDIP-T8	1	4.699 mm	7.62 mm	Not Qualified					NO	e3			9.779 mm	9 V	0 ns
ISL4221EIRZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		CMOS			EIA-232; TIA-232; V.24; V.28		SCHMITT TRIGGER	3.15 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.8 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	3	1 mm	5 mm				1		NO	e3	30	260	5 mm
ISL83078EIBZA	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS		40 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.75 mm	3.9 mm				1		YES	e3	30	260	4.9 mm		60 ns
MAX3238IPWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		BIPOLAR			EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3,5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	5 V		-40 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	.001 Amp		3	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e4	30	260	9.7 mm	10 V	0 ns
SN65ALS176DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		15 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	3-STATE DRIVER OUTPUT AND RECEIVER INPUT	YES	e4	30	260	4.9 mm	1.5 V	25 ns
SN65LBC175ADR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS			EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	.1 Amp	TRUE	4		NO	e4	30	260	9.9 mm		16 ns
SN65LVDS049PWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				2 ns	EIA-644-A; TIA-644-A	35 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	2 Amp	COMPLEMENTARY	2		YES	e4	30	260	5 mm	.25 V	3.5 ns
SN65LVDS34DR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BICMOS			EIA-644; TIA-644	12 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	4.4 mm	Not Qualified	4 Amp	TRUE	2		NO	e4	30	260	4.9 mm		6 ns
SN65LVDT388ADBT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	38	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	2	1.2 mm	4.4 mm	Not Qualified	8 Amp	TRUE	8		NO	e4	30	260	9.7 mm		4 ns
ADM3491ARZ-1REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS		70 ns	EIA-422; EIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE	SOP14,.25				3 V	1.27 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm			TRUE	1		YES	e3	30	260	8.65 mm		115 ns
HI-8585CRI	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	16.5 V	1		CMOS			ARINC 429		STANDARD	15 V		+-12/+-15	-15 V	IN-LINE	DIP8,.3		Line Driver or Receivers		11.4 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-GDIP-T8		5.08 mm	7.62 mm	Not Qualified				CAN ALSO OPERATE WITH A +/-15V SUPPLY	NO	e0			9.652 mm	9 V	0 ns
HI-8585PDI	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	16.5 V	1		CMOS			ARINC 429		STANDARD	15 V		+-12/+-15	-15 V	IN-LINE	DIP8,.3		Line Driver or Receivers		11.4 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T8	1	4.699 mm	7.62 mm	Not Qualified				CAN ALSO OPERATE WITH A +/-15V SUPPLY	NO	e0			9.779 mm	9 V	0 ns
LT1791AIS#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		2000 ns	EIA-422; EIA-485	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE	SOP14,.25				4.75 V	1.27 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	1.6 Amp		1		YES	e3	30	260	8.65 mm	1.2 V	900 ns
LTC1480IS8#TR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		80 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.752 mm	3.899 mm	Not Qualified			1		YES	e0			4.9025 mm		200 ns
LTC2855IDE	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	12	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-N12	1	.8 mm	3 mm	Not Qualified			1		YES	e0			4 mm		70 ns
SN65HVD1791DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				2000 ns	EIA-485; TIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	8.65 mm	1.5 V	200 ns
SN65LVDS049PWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				2 ns	EIA-644-A; TIA-644-A	35 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	2 Amp	COMPLEMENTARY	2		YES	e4	30	260	5 mm	.25 V	3.5 ns
SN65LVDS93DGGR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		13.38 ns	EIA-644; TIA-644	120 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	14 mm		0 ns
TRS3238EIPWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3					EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	5	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	.001 Amp		3	ALSO OPERATES AT 5V	NO	e4	NOT SPECIFIED	260	9.7 mm	10 V	0 ns
ADA4950-2YCPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3			4 mm		0 ns
DRV134UAE4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	36 V	1	1				GENERAL PURPOSE		STANDARD	18 V	18 V	+-18	-18 V	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.001 Amp	9 V	1.27 mm		18 V			1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	3	2.65 mm	7.5 mm	Not Qualified	1 Amp	COMPLEMENTARY			YES	e4	30	260	10.3 mm	20 V	0 ns
DS90LV047ATMX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		TRUE			YES	e3	30	260	9.9 mm	.25 V	0 ns
DS90LV048ATMTC	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	2 Amp	TRUE	4		NO	e0		260	5 mm		2.7 ns
HI-8570PSI	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.3 V	2		CMOS			ARINC 429		STANDARD	5 V		+-5	-5 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers	.0000001 Amp	4.8 V	1.27 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.626 mm	3.9 mm	Not Qualified					YES	e0	30	240	4.915 mm	9 V	0 ns
ISL32455EIBZ-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS		200 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	2	1.75 mm	3.9 mm				1		YES	e3	30	260	4.9 mm		200 ns
MAX13433EESD/V+	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS	AEC-Q100	50 ns	EIA-485; TIA-485	2 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V		1.8/5,3.3/5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		1.62 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	8.65 mm	1.5 V	80 ns
MAX3238IPWRG4Q1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3			AEC-Q100		EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	5 V		-40 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	.001 Amp	TRUE	3	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e4	30	260	9.7 mm	10 V	0 ns
MAX3243IDBR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS		150 ns	EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SOP28,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e4	NOT SPECIFIED	260	10.2 mm	5 V	150 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.