INDUSTRIAL Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS90UB949TRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100			330 mA			1.89 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm	1.197 V
FIN1027K8X	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH					3 V	.5 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G8		.9 mm	2 mm						YES				2.3 mm
HI-8591PSIF	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS			ARINC 429	5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	85 Cel			-40 Cel		Matte Tin (Sn)	DUAL	R-PDSO-G8	1	1.773 mm	3.9 mm	Not Qualified			1	ALSO OPERATES AT 5V SUPPLY		e3	40	260	4.915 mm		1000 ns
ISL32432EIBZ-T7A	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		1000 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	2	1.75 mm	3.9 mm				1	ALSO OPERATES WITH SUPPLY VOLTAGE RANGE 4.5 AND 5.5V	YES	e3	30	260	4.9 mm		325 ns
ISL4223EIRZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	2	CMOS			EIA-232; TIA-232; V.24; V.28		SCHMITT TRIGGER	3.15 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.65 mm	85 Cel			-40 Cel	2	MATTE TIN	QUAD	S-PQCC-N20	3	1 mm	5 mm				2		NO	e3	30	260	5 mm
LTC2851IMS8#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
MAX14783EESA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		20 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					3 V		85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1						1		YES	e3	30	260			25 ns
MAX14783EEUA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		20 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					3 V		85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1						1		YES	e3	30	260			25 ns
MAX232IDE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS			EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp		2	EXTERNAL CHARGE PUMP	NO	e4	30	260	9.9 mm	10 V	0 ns
SN65ALS180DRE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR		13 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4	30	260	8.65 mm	1.5 V	19 ns
SN65ALS180DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR		13 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	.02 Amp	COMPLEMENTARY	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4	NOT SPECIFIED	260	8.65 mm	1.5 V	19 ns
SN65LBC176P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS		25 ns	EIA-485-A; TIA-485-A; ISO 8482	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8	1	5.08 mm	7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	COMMON I/O: TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4	NOT SPECIFIED	260	9.81 mm	1.1 V	33 ns
SN65LVDS9637DGKRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	CMOS			EIA-644; TIA-644	10 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	8 Amp	TRUE	2		NO	e4	NOT SPECIFIED	260	3 mm		3 ns
SN65MLVD2DRBT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-899; TIA-899	25 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N8	2	1 mm	3 mm	Not Qualified	8 Amp	TRUE	1		NO	e4	30	260	3 mm	.48 V	6 ns
SP211EEA-L	Exar	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers	.001 Amp	4.5 V	.65 mm	85 Cel			-40 Cel	4	Matte Tin (Sn)	DUAL	R-PDSO-G28	2	1.99 mm	5.29 mm	Not Qualified	3.2 Amp		5	LOW POWER SHUTDOWN AND TRI-STATE ENABLE	NO	e3	40	260	10.2 mm	10 V	1500 ns
SP233AET-L	Exar	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS		3000 ns	EIA-232-F; EIA-232; TIA-232; V.28	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	2	Matte Tin (Sn)	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified	3.2 Amp		2		NO	e3	40	260	12.8 mm	10 V	1000 ns
SP3232EBEN-L	Exar	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	Matte Tin (Sn)	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	1.6 Amp		2		NO	e3	40	260	9.9 mm	10 V	0 ns
SP3491EN-L/TR	Exar	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		60 ns	EIA-485; EIA-422	2 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	2	1.75 mm	3.9 mm	Not Qualified	2.5 Amp		1	CAN ALSO OPERATE WITH A 5V SUPPLY	YES	e3		260	8.65 mm	1.5 V	120 ns
SP491EEN-L	Exar	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		60 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00001 Amp	4.75 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e3		260	8.65 mm	1.5 V	100 ns
TRS3386EIPWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3				EIA-232; TIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified			2		NO	e4	30	260	6.5 mm	10 V	0 ns
TRSF3223EIRGWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2				EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.20SQ,25	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	5 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N20	2	1 mm	5 mm	Not Qualified	1.6 Amp		2		NO	e4	NOT SPECIFIED	260	5 mm	10 V	0 ns
AD8138ARM-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					1.4 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified					YES	e0		240	3 mm		0 ns
ADM3065EARMZ-R7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1			15 ns	EIA-485; TIA-485	7.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP8,.2,25				3 V	.65 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm			COMPLEMENTARY	1		YES	e3	30	260	3 mm		35 ns
FIN1101MX	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			1.75 ns	EIA-644-A; TIA-644-A		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1		YES	e4	30	260	4.9 mm		1.75 ns
ISL3150EIUZ-T7A	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1			1300 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	2	1.1 mm	3 mm				1		YES	e3	30	260	3 mm		150 ns
ISL3179EIBZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.75 mm	3.9 mm				1		YES	e3	30	260	4.9 mm		16.5 ns
ISP1507BBSTM	St-ericsson	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			20 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.65 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified			1		NO		NOT SPECIFIED	NOT SPECIFIED	5 mm		20 ns
LTC485IN8	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	CMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T8	1	3.937 mm	7.62 mm	Not Qualified		COMPLEMENTARY	1	COMMON I/O; TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e0	20	235			200 ns
MAX3030EEUE-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		16 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e0			5 mm	2 V	0 ns
MAX3030EEUE+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		16 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e3	30	260	5 mm	2 V	0 ns
MAX3161EEAG/GG8	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		800 ns	EIA-422; EIA-485	5.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH	SSOP24,.3			.000125 Amp	3 V	.65 mm	85 Cel		DIFFERENTIAL	-40 Cel	1		DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm		2.5 Amp	COMPLEMENTARY	1	IT CAN BE PROGRAMMABLE AS RS-232 INTERFACE 2TX/2RX TRANSCEIVER	YES				8.2 mm	1.5 V	150 ns
MAX3222IDBRE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS			EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	2	ALSO OPERATES AT 5V SUPPLY	NO	e4	NOT SPECIFIED	260	7.2 mm	10 V	0 ns
MAX3227EEAE/V+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS	AEC-Q100			1 mA				3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers			.635 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1			Not Qualified	1.6 Amp				NO	e3	30	260		10 V	0 ns
MAX491EESD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		60 ns	EIA-422; EIA-485	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.000002 Amp	4.75 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e0		245	8.65 mm	1.5 V	150 ns
MAX491EESD+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		60 ns	EIA-422; EIA-485	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.000002 Amp	4.75 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e3	30	260	8.65 mm	1.5 V	150 ns
SN65C1167EPWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			16 ns	EIA-422-B; TIA-422-B; V.11	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	20 Amp		2		YES	e4	30	260	5 mm	2 V	27 ns
SN65HVD06P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BICMOS		40 ns	EIA-485-A; TIA-485-A; ISO 8482E	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	.1 Amp	COMPLEMENTARY	1	SIGNALING RATE UPTO 10 MBPS	YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	2.5 V	70 ns
SN65LVDS9638DGK	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	3 mm	.247 V	0 ns
AD2427WCCSZ-RL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.98 V	1	DMOS	AEC-Q100			12 mA	STANDARD	1.9 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20				1.7 V	.5 mm	105 Cel		OPEN-DRAIN	-40 Cel	1		QUAD	S-XQCC-N32		.8 mm	5 mm		1.5 Amp		1		YES				5 mm
ADN4668ARZ	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	2 Amp		4		NO	e3	30	260	9.9 mm		2.7 ns
ADN4694EBRZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			DMOS				24 mA		3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp		1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1			Not Qualified	8 Amp				YES	e3	30	260		.48 V	0 ns
AM26C32IPWE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	6 Amp		4		NO	e4	30	260	5 mm		27 ns
AM26LV31EINSR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			12 ns	EIA-422-B; TIA-422-B; V.11	.1 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.3	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	30 Amp	TRUE		BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	10.2 mm	2 V	0 ns
DS90LV001TLD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644-A; TIA-644-A	70 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.11,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	TIN LEAD	DUAL	S-PDSO-N8	1	.8 mm	3 mm	Not Qualified	.01 Amp	TRUE	1		YES	e0	20	235	3 mm	.25 V	2 ns
HI-8570CRI	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.3 V	2	CMOS			ARINC 429		STANDARD	5 V		+-5	-5 V	IN-LINE	DIP8,.3		Line Driver or Receivers	.0000001 Amp	4.8 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-CDIP-T8		5.08 mm	6.29 mm	Not Qualified					YES	e0			9.652 mm	9 V	0 ns
HI-8570PDI	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.3 V	2	CMOS			ARINC 429		STANDARD	5 V		+-5	-5 V	IN-LINE	DIP8,.3		Line Driver or Receivers	.0000001 Amp	4.8 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T8	1	4.699 mm	6.35 mm	Not Qualified					YES	e0			4.699 mm	9 V	0 ns
MAX13433EETD+T	Analog Devices		INDUSTRIAL	NO LEAD	14	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		50 ns	EIA-485; TIA-485	2 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V	1.8/5,3.3/5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC14,.12,16	3 V	Line Driver or Receivers		1.62 V	.4 mm	85 Cel	5 V		-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N14	1	.8 mm	3 mm	Not Qualified	1 Amp		1		YES	e3	30	260	3 mm	1.5 V	80 ns
SN65HVD3085EDRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		500 ns	EIA-485-A; TIA-485-A	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e4	30	260	4.9 mm	1.5 V	200 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.