INDUSTRIAL Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS80PCI102SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1	2							2.625 V	2.5,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V	Line Driver or Receivers			.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm	4 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	4 mm		0 ns
DS89C21TM	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	10 ns	V.11; EIA-422-A; TIA-422-A	12 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	6 Amp		1		YES	e0	20	235	4.9 mm	2 V	30 ns
DS90LV019TMX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	7 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3/5	SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.753 mm	3.9 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	CAN ALSO OPERATE WITH A 5V SUPPLY	YES	e0	20	235	8.62 mm	.25 V	9 ns
HIN202IBNZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS	10000 ns	V.28; EIA-232-E		SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	3	1.75 mm	3.9 mm				2		NO	e3	30	260	9.9 mm		10000 ns
ISL3159EIBZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS	12 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.75 mm	3.9 mm				1		YES	e3	30	260	4.9 mm		13 ns
ISL3176EIBZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS		EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	3	1.75 mm	3.9 mm				1		YES	e3	30	260	8.65 mm
ISL3176EIBZ-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS		EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	3	1.75 mm	3.9 mm				1		YES	e3	30	260	8.65 mm
ISL32470EIBZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS	450 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	2	1.75 mm	3.9 mm				1		YES	e3	30	260	8.65 mm		280 ns
ISL3259EIBZ-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.75 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.75 mm	3.9 mm				1		YES	e3	30	260	4.9 mm		13 ns
LT1785IN8#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR	2000 ns	EIA-422; EIA-485	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			IN-LINE	DIP8,.3				4.75 V	2.54 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDIP-T8	1	3.429 mm	7.62 mm	Not Qualified	1.6 Amp		1		YES	e3	30	260	10.16 mm	1.2 V	900 ns
LTC1334IG	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3		CMOS	4000 ns	EIA-232; EIA-422; EIA-485; EIA-562		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH						.65 mm	85 Cel			-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified			3	CONFIGURABLE INTERFACE STANDARDS	YES	e0			10.2 mm		6000 ns
LTC1688IS	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4			12 ns	EIA-422; EIA-485		STANDARD	5 V			SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e0			9.9 mm
LTC486ISW#PBF	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS	50 ns	EIA-422; EIA-485		STANDARD	5 V			SMALL OUTLINE					4.75 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	2.642 mm	7.493 mm	Not Qualified					YES	e3	30	260	10.299 mm
LTM2882IY-3	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	BALL	32	BGA	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			500 ns	EIA-232-F; TIA-232-F		SCHMITT TRIGGER	3.3 V			GRID ARRAY					1.62 V	1.27 mm	85 Cel			-40 Cel	2	TIN LEAD	BOTTOM	R-PBGA-B32	3	3.62 mm	11.25 mm				2		NO	e0		245	15 mm		400 ns
MAX13430EETB+T	Analog Devices		INDUSTRIAL	NO LEAD	10	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS	800 ns	EIA-485; TIA-485	2 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V	1.8/5,3.3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	3 V	Line Driver or Receivers		1.62 V	.5 mm	85 Cel	5 V		-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N10	1	.8 mm	3 mm	Not Qualified	1 Amp		1		YES	e3	30	260	3 mm	1.5 V	200 ns
MAX202IDWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			10000 ns	EIA-232-F; TIA-232-F; V.28	15 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	85 Cel	5 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	2		NO	e4	30	260	10.3 mm	10 V	10000 ns
MAX202IPW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.28	15 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	85 Cel	5 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	5 mm	10 V	10000 ns
MAX208IDBG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4			10000 ns	EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.5 V	Line Driver or Receivers	.0002 Amp	4.5 V	.65 mm	85 Cel	5 V		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		4		NO	e4	30	260	8.2 mm	10 V	10000 ns
MAX221EEAE	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS		EIA-232; V.28	10 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16	1	1.99 mm	5.29 mm	Not Qualified	3.2 Amp		1		NO	e0			6.2 mm	10 V	0 ns
MAX221EEAE+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				EIA-232; V.28		SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.99 mm	5.29 mm	Not Qualified			1		NO	e3	30	260	6.2 mm
MAX232EID	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp		2		NO	e4	NOT SPECIFIED	260	9.9 mm	10 V	0 ns
MAX3042BEUE-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS	1500 ns	EIA-422; EIA-485		STANDARD	5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		4.75 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e0			5 mm	1.5 V	0 ns
MAX3042BEUE+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS	1500 ns	EIA-422; EIA-485		STANDARD	5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		4.75 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e3	30	260	5 mm	1.5 V	0 ns
MAX3089ESD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		CMOS	2600 ns	EIA-422; EIA-485	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.000125 Amp	4.75 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1		YES	e0			8.65 mm	2 V	200 ns
MAX3089ESD+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		CMOS	1000 ns	EIA-422; EIA-485	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1		YES	e3	30	260	8.65 mm	1.5 V	200 ns
MAX3089ESD-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		CMOS	2600 ns	EIA-422; EIA-485	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1		YES	e0	20	240	8.65 mm	1.5 V	200 ns
MAX3089ESD+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		CMOS	1000 ns	EIA-422; EIA-485	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1		YES	e3	30	260	8.65 mm	1.5 V	200 ns
MAX3095ESE	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS		EIA-422; EIA-423; EIA-485	3.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			4			e0			9.9 mm		98 ns
MAX3095ESE+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		EIA-485; EIA-422	3.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			4		NO	e3	30	260	9.9 mm		98 ns
MAX3222EAP-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS		EIA-232; EIA-562	1 mA	SCHMITT TRIGGER	5 V		3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel		3-STATE	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	2	2 RECEIVERS ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP	NO	e0			7.2 mm	10 V	0 ns
MAX3222EAP+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS		EIA-232; EIA-562	1 mA	SCHMITT TRIGGER	5 V		3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel		3-STATE	-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	2	2 RECEIVERS ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP	NO	e3	30	260	7.2 mm	10 V	0 ns
MAX3238EIPWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3			150 ns	EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	5	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	.001 Amp	INVERTED	3	ALSO OPERATES AT 5V SUPPLY	NO	e4	NOT SPECIFIED	260	9.7 mm	10 V	150 ns
MAX490EESA-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		CMOS	60 ns	EIA-422; EIA-485	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000002 Amp	4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1		YES	e0		245	4.9 mm	1.5 V	150 ns
MAX490EESA+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		CMOS	60 ns	EIA-422; EIA-485	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000002 Amp	4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1		YES	e3	30	260	4.9 mm	1.5 V	150 ns
NB3N206SDR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1			2.4 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	2.97 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e3	30	260	4.9 mm	.05 V	6 ns
SN65C3221EDBRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	TRUE	1	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	6.2 mm	10 V	0 ns
SN65LBC173DR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485; V.10; V.11	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	9.9 mm		30 ns
SN65LBC175DR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		V.11; EIA-422-A; EIA-423-A; EIA-485	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	20000 Amp	TRUE	4		NO	e4	30	260	9.9 mm		30 ns
SN65LBC180AN	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BICMOS	12 ns	EIA-485-A; TIA-485-A; ISO 8482	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	IN-LINE	DIP14,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14	1	5.08 mm	7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	19.305 mm	1 V	20 ns
SN65LV1023ARHBR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			103 ns	GENERAL PURPOSE	70 mA	STANDARD	3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32	2	1 mm	5 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	5 mm		0 ns
SN65LV1023ARHBRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				GENERAL PURPOSE	70 mA	STANDARD	3.3 V		3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32	2	1 mm	5 mm	Not Qualified			1		YES	e4	30	260	5 mm		0 ns
SN65LVDM050DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	2.7 ns	GENERAL PURPOSE	27 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	.02 Amp	COMPLEMENTARY	2		YES	e4	30	260	9.9 mm	.25 V	4.5 ns
SN65LVDM051PW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	2.7 ns	GENERAL PURPOSE	20 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	8 Amp	TRUE	2		YES	e4	30	260	5 mm	.247 V	4.5 ns
SN65LVDM179DGK	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	2.7 ns	GENERAL PURPOSE	15 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	3 mm	.25 V	4.5 ns
SN65LVDS391PWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS	2.9 ns	EIA-644; TIA-644	26 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified		TRUE			YES	e4	30	260	5 mm	.247 V	0 ns
SN65LVDS93AZQLR	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	56	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				GENERAL PURPOSE	116 mA	STANDARD	3.3 V	3.6 V	3.3	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA56,6X10,25	3 V	Line Driver or Receivers	.000025 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	TIN SILVER COPPER	BOTTOM	R-PBGA-B56	2	1 mm	4.5 mm	Not Qualified		COMPLEMENTARY			YES	e1	30	260	7 mm		0 ns
SN65LVDS94DGGR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		EIA-644; TIA-644		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		TRUE	4		NO	e4	30	260	14 mm		0 ns
SN65LVDS95DGGREP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		EIA-644; TIA-644	110 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.5 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.