NO LEAD Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ISP1102BS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	14	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V	1.8/3.3,5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1SQ,20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N14	1	1 mm	2.5 mm	Not Qualified		1		YES	e4	40	260	2.5 mm	1.3 V	15 ns
ISP1506BBS,551	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1			11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.8 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V	-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1		NO	e3/e4			4 mm		17 ns
ISP1301BS,115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	4.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V			1.65 V	.5 mm	85 Cel	3.3 V	-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1		YES				4 mm		15 ns
ISP1105BS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V	3.3,5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	3 V	Line Driver or Receivers	.000001 Amp	1.65 V	.5 mm	85 Cel	3.3 V	-40 Cel	1		QUAD	S-PQCC-N16	1	1 mm	3 mm	Not Qualified	2 Amp	3	TWO SINGLE ENDED RECEIVERS	YES		40	260	3 mm	2.5 V	15 ns
ISP1505ABS,557	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.65 V			3 V	.5 mm	85 Cel	3.3 V	-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1		YES	e3/e4			4 mm		17 ns
ISP1507CBS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1	IT ALSO NEED 1.65 TO 1.95 I/O SUPPLY					4 mm		17 ns
ISP1505ABS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.65 V			3 V	.5 mm	85 Cel	3.3 V	-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1		YES	e3/e4			4 mm		17 ns
ISP1102BS,115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	14	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE	8 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V	1.8/3.3,5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1SQ,20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N14		1 mm	2.5 mm	Not Qualified	2 Amp	1		YES	e4			2.5 mm	2.5 V	15 ns
ISP1109BS,151	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V	-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified		1	TWO SINGLE ENDED RECEIVERS	YES	e3/e4			5 mm		15 ns
ISP1302HN,518	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.4 V			3 V	.5 mm	85 Cel	3.3 V	-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1		YES				4 mm		15 ns
NTB0101GF	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			14.2 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.5 V	5.5 V		SMALL OUTLINE, VERY THIN PROFILE		1.65 V			1.2 V	.35 mm	125 Cel	1.8 V	-40 Cel	1	TIN	DUAL	S-PDSO-N6	1	.5 mm	1 mm	Not Qualified		1		NO	e3			1 mm		14.2 ns
ISP1506BBS,557	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1			11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.8 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V	-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1		NO	e3/e4	NOT SPECIFIED	NOT SPECIFIED	4 mm		17 ns
ISP1109BS,157	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V	1.8/3.3,3.3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	3.3 V	-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified	2 Amp	1	TWO SINGLE ENDED RECEIVERS	YES	e3/e4			5 mm	3.3 V	15 ns
ISP1506BBS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1			11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.8 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V	-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1		NO	e3/e4	NOT SPECIFIED	NOT SPECIFIED	4 mm		17 ns
ISP1504CBS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified		1		YES	e3/e4			5 mm		17 ns
ISP1302HN,557	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.4 V			3 V	.5 mm	85 Cel	3.3 V	-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1		YES				4 mm		15 ns
ISP1301BS,151	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	4.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V			1.65 V	.5 mm	85 Cel	3.3 V	-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1		YES				4 mm		15 ns
ISP1110VH	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		18 ns	GENERAL PURPOSE	8 mA	DIFFERENTIAL	5 V	4.5 V	1.8,2.8,5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LGA16,5X5,30/20	2.7 V	Line Driver or Receivers		4 V	.5 mm	85 Cel	2.8 V	-40 Cel	1		QUAD	S-PQCC-N16		.8 mm	3 mm	Not Qualified	2 Amp	1	ALSO REQUIRES 1.65V TO 2.85V SUPPLY	YES				3 mm		15 ns
ISP1504ABS,151	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified		1		YES	e3/e4			5 mm		17 ns
ISP1301BS,157	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	4.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V			1.65 V	.5 mm	85 Cel	3.3 V	-40 Cel	1		QUAD	S-PQCC-N24	1	1 mm	4 mm	Not Qualified		1		YES			260	4 mm		15 ns
ISP1504ABS,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel		-40 Cel	1		QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified		1		YES	e3/e4	NOT SPECIFIED	NOT SPECIFIED	5 mm		17 ns
ISP1102BS-T	NXP Semiconductors		INDUSTRIAL	NO LEAD	14	QCCN	SQUARE	PLASTIC/EPOXY	YES							8 mA				1.8/3.3,5	CHIP CARRIER	LCC14,.1SQ,20		Line Driver or Receivers			.5 mm	85 Cel		-40 Cel	1		QUAD	S-PQCC-N14				Not Qualified	2 Amp			YES					2.5 V	15 ns
ISP1505CBS,551	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.65 V			3 V	.5 mm	85 Cel	3.3 V	-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1		YES	e3/e4			4 mm		17 ns
NTB0102GT	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			17.2 ns	GENERAL PURPOSE			1.5 V			SMALL OUTLINE, VERY THIN PROFILE					1.2 V	.5 mm	125 Cel		-40 Cel	2	TIN	DUAL	R-PDSO-N8	1	.5 mm	1 mm	Not Qualified		2	IT ALSO OPERATE AT 1.65 TO 5.5 V	NO	e3	30	260	1.95 mm		17.2 ns
ISP1102AW,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4 V			1.65 V	.5 mm	85 Cel	5 V	-40 Cel	1		QUAD	S-PQCC-N16		.8 mm	3 mm	Not Qualified		1		YES				3 mm		15 ns
ISP1507DBS,518	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1	IT ALSO NEED 1.65 TO 1.95 I/O SUPPLY					4 mm		17 ns
ISP1507FBS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1	IT ALSO NEED 1.65 TO 1.95 I/O SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4 mm		17 ns
ISP1110VH,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V	4.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V			4 V	.5 mm	85 Cel	2.8 V	-40 Cel	1		QUAD	S-PQCC-N16		.8 mm	3 mm	Not Qualified		1	ALSO REQUIRES 1.65V TO 2.85V SUPPLY	YES				3 mm		15 ns
NTB0102GD,125	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			17.2 ns	GENERAL PURPOSE			1.5 V		1.2/3.6,1.8/5	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.12,20		Other Interface ICs		1.2 V	.5 mm	125 Cel		-40 Cel	2		DUAL	R-PDSO-N8	1	.5 mm	2 mm	Not Qualified		2	IT ALSO OPERATE AT 1.65 TO 5.5 V	NO		30	260	3 mm		17.2 ns
ISP1507BBS,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel		-40 Cel	1		QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified		1						5 mm		17 ns
ISP1102W,115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE	8 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V	1.8/3.3,5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,30/20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V	-40 Cel	1		QUAD	S-PQCC-N16		.8 mm	3 mm	Not Qualified	2 Amp	1		YES				3 mm	2.5 V	15 ns
ISP1507DBS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1	IT ALSO NEED 1.65 TO 1.95 I/O SUPPLY					4 mm		17 ns
ISP1507FBS,518	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1	IT ALSO NEED 1.65 TO 1.95 I/O SUPPLY	NO				4 mm		17 ns
ISP1105BS,115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V	-40 Cel	1		QUAD	S-PQCC-N16		1 mm	3 mm	Not Qualified		3	TWO SINGLE ENDED RECEIVERS	YES				3 mm		15 ns
ISP1102AW,115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4 V			1.65 V	.5 mm	85 Cel	5 V	-40 Cel	1		QUAD	S-PQCC-N16		.8 mm	3 mm	Not Qualified		1		YES				3 mm		15 ns
NTB0101GM,115	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			14.2 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.5 V	5.5 V	1.2/3.6,1.8/5	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	1.65 V	Other Interface ICs		1.2 V	.5 mm	125 Cel	1.8 V	-40 Cel	1	TIN	DUAL	R-PDSO-N6	1	.5 mm	1 mm	Not Qualified		1		NO	e3	30	260	1.45 mm		14.2 ns
ISP1102BS,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	14	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE	8 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V	1.8/3.3,5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1SQ,20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N14		1 mm	2.5 mm	Not Qualified	2 Amp	1		YES	e4			2.5 mm	2.5 V	15 ns
ISP1301BS,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	4.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V			1.65 V	.5 mm	85 Cel	3.3 V	-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1		YES				4 mm		15 ns
ISP1302HN,551	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.4 V			3 V	.5 mm	85 Cel	3.3 V	-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1		YES				4 mm		15 ns
ISP1505CBS,557	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.65 V			3 V	.5 mm	85 Cel	3.3 V	-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1		YES	e3/e4			4 mm		17 ns
ISP1109BS,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V	-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified		1	TWO SINGLE ENDED RECEIVERS	YES	e3/e4			5 mm		15 ns
ISP1506ABS,551	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1			11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.8 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V	-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified		1		NO	e3/e4			4 mm		17 ns
TLE7258LE	Infineon Technologies	LINE TRANSCEIVER		NO LEAD	8	HTSON	SQUARE	PLASTIC/EPOXY	YES	18 V	1	BICMOS			ISO 17987-4		SCHMITT TRIGGER	7 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE					5.5 V	.65 mm				1	TIN	DUAL	S-PDSO-N8	2A	1.15 mm	3 mm			1	ALSO OPERATES IN EXTENDED SUPPLY VOLTAGE RANGE 18 TO 40V	NO	e3			3 mm
TLE7258D	Infineon Technologies	LINE TRANSCEIVER		NO LEAD	8	HTSON	SQUARE	PLASTIC/EPOXY	YES	18 V	1	BICMOS	AEC-Q100		ISO 17987-4; SAE J2602		SCHMITT TRIGGER	7 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE					5.5 V	.65 mm				1	TIN	DUAL	S-PDSO-N8	2A	1.15 mm	3 mm			1		NO	e3			3 mm
PI3HDMI301ZLE	Diodes Incorporated	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1			2 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.135 V	.4 mm	70 Cel		0 Cel	3	MATTE TIN	QUAD	S-XQCC-N64		.8 mm	7.5 mm	Not Qualified		9		YES	e3			7.5 mm		2 ns
PI3HDMI301ZLEX	Diodes Incorporated	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1			2 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.135 V	.4 mm	70 Cel		0 Cel	3	MATTE TIN	QUAD	S-XQCC-N64		.8 mm	7.5 mm	Not Qualified		9		YES	e3			7.5 mm		2 ns
PI6ULS5V9617AZEE	Diodes Incorporated	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		173 ns			STANDARD	.95 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					.6 V	.5 mm	85 Cel		-40 Cel	1		DUAL	R-PDSO-N8		.8 mm	2 mm			1	IT ALSO REQUIRES 2.2 TO 5.5 V	NO				2.95 mm		173 ns
PI3HDMI101ZHE	Diodes Incorporated	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	42	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	3.465 V	4			136 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V			CHIP CARRIER					3.135 V	.5 mm	70 Cel		0 Cel	4		QUAD	R-XQCC-N42		.84 mm	3.5 mm	Not Qualified		4		YES				9 mm		136 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.