National Semiconductor Line Drivers & Receivers 20

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS90LT012ATMFX/NOPB	National Semiconductor	LINE RECEIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644-A; TIA-644-A	9 mA	DIFFERENTIAL	3.3 V	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Line Driver or Receivers		2.7 V	.95 mm	85 Cel			-40 Cel		Matte Tin (Sn)	DUAL	R-PDSO-G5	1	1.22 mm	1.6 mm	Not Qualified	2 Amp		1			e3	40	260	2.92 mm		3.5 ns
DS91M040TSQE	National Semiconductor		INDUSTRIAL	NO LEAD	32	QCCN	SQUARE	PLASTIC/EPOXY	YES							75 mA		3.3 V	3.3		CHIP CARRIER	LCC32,.2SQ,20	Line Driver or Receivers	.000015 Amp		.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-PQCC-N32	2			Not Qualified	8 Amp				YES	e0	40	260			5.5 ns
DS26LS31MJ/883C	National Semiconductor		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR	MIL-STD-883 Class C	15 ns				5 V	5		IN-LINE	DIP16,.3	Line Driver or Receivers	.00002 Amp		2.54 mm	125 Cel		3-STATE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T16				Not Qualified					YES	e0				2 V
DS90LT012ATMFX	National Semiconductor	LINE RECEIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644-A; TIA-644-A	9 mA	DIFFERENTIAL	3.3 V	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Line Driver or Receivers		2.7 V	.95 mm	85 Cel			-40 Cel		Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G5	1	1.22 mm	1.6 mm	Not Qualified	2 Amp		1			e0	40	260	2.92 mm		3.5 ns
DS26LS32MJ/883B	National Semiconductor	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR	MIL-STD-883 Class B		EIA-422; EIA-423; FED STD 1020; FED STD 1030	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5		IN-LINE	DIP16,.3	Line Driver or Receivers		4.5 V	2.54 mm	125 Cel			-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	8 Amp		4			e0			19.43 mm		30 ns
DS26C31TMDC	National Semiconductor	LINE DRIVER	INDUSTRIAL	NO LEAD		DIE	UNSPECIFIED	UNSPECIFIED	YES	5.5 V	4	CMOS		11 ns	EIA-422		STANDARD	5 V	5		UNCASED CHIP	DIE OR CHIP	Line Driver or Receivers	.000001 Amp	4.5 V		85 Cel		3-STATE	-40 Cel	4		UPPER	X-XUUC-N	1			Not Qualified					YES		40	260		2 V	0 ns
DS26LS31CMWC	National Semiconductor	LINE DRIVER	COMMERCIAL	NO LEAD	16	DIE	RECTANGULAR	UNSPECIFIED	YES	5.25 V	4	BIPOLAR		15 ns	EIA-422; FED STD 1020		STANDARD	5 V	5		UNCASED CHIP	WAFER	Line Driver or Receivers	.00002 Amp	4.75 V		70 Cel		3-STATE	0 Cel	4		UPPER	R-XUUC-N16	1			Not Qualified					YES		40	260		2 V	0 ns
DS9637AMJ	National Semiconductor	LINE RECEIVER	MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR			EIA-422; EIA-423; MIL-STD-188-114	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5		IN-LINE	DIP8,.3	Line Driver or Receivers		4.5 V	2.54 mm	125 Cel		TOTEM-POLE	-55 Cel		TIN LEAD	DUAL	R-GDIP-T8	1	5.08 mm	7.62 mm	Not Qualified	20 Amp	TRUE	1			e0					25 ns
DS26LS31MJ/883B	National Semiconductor		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO		4	BIPOLAR	38535Q/M;38534H;883B	15 ns				5 V	5		IN-LINE	DIP16,.3	Line Driver or Receivers	.00002 Amp		2.54 mm	125 Cel		3-STATE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T16				Not Qualified					YES	e0				2 V
DS34C86TN/NOPB	National Semiconductor	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		4	CMOS			EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V	5		IN-LINE	DIP16,.3	Line Driver or Receivers			2.54 mm	85 Cel		3-STATE	-40 Cel		MATTE TIN	DUAL	R-PDIP-T16	1	5.08 mm	7.62 mm	Not Qualified	6 Amp	INVERTED	4			e3			19.305 mm		30 ns
DS8837N	National Semiconductor	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR			GENERAL PURPOSE	60 mA	SCHMITT TRIGGER	5 V	5		IN-LINE	DIP16,.3	Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	INVERTED	3			e0			21.755 mm		30 ns
DS3691N	National Semiconductor	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		2	BIPOLAR		300 ns	EIA-423; EIA-442	30 mA	STANDARD	5 V	5/+-5	-5 V	IN-LINE	DIP16,.3	Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	2	Tin/Lead (Sn85Pb15)	DUAL	R-PDIP-T16	1	5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY		CAN ALSO BE USED AS SINGLE ENDED DRIVER; CONFIGURABLE INTERFACE STANDARDS	YES	e0	40	260	19.304 mm	2 V	0 ns
DS26C32ACM	National Semiconductor	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	CMOS			EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V	5		SMALL OUTLINE	SOP16,.25	Line Driver or Receivers			1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	6 Amp		1			e0			9.9 mm		0 ns
DS7830J	National Semiconductor	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR		16 ns	GENERAL PURPOSE		GATED	5 V	5		IN-LINE	DIP14,.3	Line Driver or Receivers	.00012 Amp	4.5 V	2.54 mm	125 Cel			-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified					YES	e0			19.43 mm	1.3 V	0 ns
DS90LT012ATLDX	National Semiconductor	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			EIA-644-A; TIA-644-A	9 mA	DIFFERENTIAL	3.3 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20	Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-XDSO-N8	1	.8 mm	3 mm	Not Qualified	2 Amp		1			e0		235	3 mm		3.5 ns
DS1488MX	National Semiconductor	LINE DRIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	BIPOLAR		350 ns	EIA-232-D; V.24		GATED	9 V	+-9	-9 V	SMALL OUTLINE	SOP14,.25	Line Driver or Receivers	.00001 Amp		1.27 mm	75 Cel	-9 V	TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER; PROGRAMMABLE SLEW RATE	NO	e0			8.65 mm	12 V	0 ns
DS78C20J/883B	National Semiconductor		MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO			CMOS	38535Q/M;38534H;883B						5/15		IN-LINE	DIP14,.3	Line Driver or Receivers			2.54 mm	125 Cel			-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T14				Not Qualified	1.6 Amp					e0					150 ns
DS90LV032TMX	National Semiconductor	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	CMOS			EIA-644; IEEE 1596.3		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE					1.27 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	4						9.9 mm
DS92LV1212TMSAX	National Semiconductor	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	60 mA	STANDARD	3.3 V	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.29 mm	Not Qualified			1		YES	e0	30	235	10.2 mm		0 ns
UA96176RC	National Semiconductor	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO		1	BIPOLAR			EIA-422-A; EIA-485	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5		IN-LINE	DIP8,.3	Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-GDIP-T8		5.08 mm	7.62 mm	Not Qualified	16 Amp		1		YES	e0				1.5 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.