Texas Instruments Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
TUSB544IRNQR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.4 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	1	.8 mm	4 mm				4		YES	e4	30	260	6 mm
UA9637ACDRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	2	1.75 mm	3.9 mm	Not Qualified	20 Amp	TRUE	2		NO	e4	30	260	4.9 mm		25 ns
AM26C32CDBLE	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers		4.5 V	.65 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDSO-G16		2 mm	5.3 mm	Not Qualified	6 Amp	TRUE	4		NO		NOT SPECIFIED	NOT SPECIFIED	6.2 mm		27 ns
AM26C32INS	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	6 Amp		4		NO	e4	30	260	10.2 mm		27 ns
AM26C32INSLE	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS			V.10; V.11; EIA-422-B; EIA-423-B	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDSO-G16		2 mm	5.3 mm	Not Qualified	6 Amp	TRUE	4				NOT SPECIFIED	NOT SPECIFIED	10.2 mm		27 ns
AM26LS32ACNE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	8 Amp	TRUE	4		NO	e4			19.305 mm		35 ns
AM26LS32ACPW	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	.65 mm	70 Cel	5 V	3-STATE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	5 mm		35 ns
DIX4192IPFBR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		CMOS			GENERAL PURPOSE		STANDARD	1.8 V	3.6 V			FLATPACK, THIN PROFILE, FINE PITCH		3 V		.000025 Amp	1.65 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G48	2	1.2 mm	7 mm	Not Qualified		TRUE	4		YES	e4	30	260	7 mm		0 ns
DRV603PWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	2				GENERAL PURPOSE	1 mA		3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.2 mm	4.4 mm	Not Qualified		TRUE			YES	e4	30	260	5 mm	6.15 V	0 ns
DS10BR254TSQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		6								3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers	.00001 Amp		.5 mm	85 Cel	3.3 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified		TRUE	2		NO	e3	30	260	6 mm		0 ns
DS110DF410SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			2.375 V	.5 mm	85 Cel	2.5 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				4		YES	e3	30	260	7 mm	2 V	0 ns
DS15BR401TVSX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4				2 ns	GENERAL PURPOSE	215 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V		-40 Cel	4	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified	.01 Amp		4		YES	e3	30	260	7 mm		2 ns
DS160PR410RNQR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	4			.13 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.4 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	1	.8 mm	4 mm				4		YES	e4	30	260	6 mm		.13 ns
DS160PR410RNQT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	4			.13 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.4 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	1	.8 mm	4 mm				4		YES	e4	30	260	6 mm		.13 ns
DS25BR120TSD	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.6 V	1				.465 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-XDSO-N8	3	.8 mm	3 mm	Not Qualified					YES	e0			3 mm
DS26C32AME/883	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		CMOS	MIL-STD-883		EIA-422; EIA-423; FED STD 1020; FED STD 1030	23 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel			QUAD	S-CQCC-N20	1	1.91 mm	8.89 mm	Not Qualified	6 Amp	TRUE	4		YES				8.89 mm		35 ns
DS26LS31CN	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		15 ns	EIA-422; FED STD 1020		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDIP-T16	1	4.318 mm	7.62 mm	Not Qualified					YES	e0			19.05 mm	2 V	0 ns
DS485TM/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1		CMOS		65 ns	EIA-422; EIA-485; TIA-485	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000002 Amp		1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e3	30	260	4.9 mm	1.5 V	320 ns
DS75176BN	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		22 ns	EIA-485; EIA-422	55 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDIP-T8	1	5.08 mm	7.62 mm	Not Qualified	8 Amp		1	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e0			9.59 mm	1.5 V	37 ns
DS8921AMX	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BIPOLAR		15 ns	EIA-422	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e0	20	235	4.9 mm	2.5 V	20 ns
DS8921N	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1				15 ns	EIA-422	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00002 Amp	4.5 V	2.54 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDIP-T8	1	5.08 mm	7.62 mm	Not Qualified	8 Amp		1		YES	e0			9.59 mm	2.5 V	22.5 ns
DS90C032TMX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-644; TIA-644; IEEE 1596.3		DIFFERENTIAL	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	2 Amp	TRUE	4		NO	e3	30	260	9.9 mm		6 ns
DS90C387RVJD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644		STANDARD	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	8	TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified					YES	e0		260	14 mm		0 ns
DS90C387RVJD/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644	235 mA	STANDARD	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	8	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	14 mm		0 ns
DS90C387RVJDX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644	235 mA	STANDARD	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	8	TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified					YES	e0		260	14 mm		0 ns
DS90C387RVJDX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644	235 mA	STANDARD	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	8	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	14 mm		0 ns
DS90C401MX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		3.5 ns	EIA-644; TIA-644	14 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel	5 V	CONSTANT-CURRENT	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4.9 mm	.25 V	0 ns
DS90CF364AMTD/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS			EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		-10 Cel		MATTE TIN	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified			3		NO	e3	30	260	12.5 mm		0 ns
DS90CF383BMT	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	60 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	4	TIN LEAD	DUAL	R-PDSO-G56	2	1.1 mm	6.1 mm	Not Qualified					YES	e0	20	235	14 mm		0 ns
DS90CF384MTD/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		4		CMOS			EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		TRUE	4		NO	e3	30	260	14 mm		0 ns
DS90CF384MTDX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		4		CMOS			EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		TRUE	4		NO	e3	30	260	14 mm		0 ns
DS90CF386SLCX/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	135 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA64,8X8,32	3 V	Line Driver or Receivers		3 V	.8 mm	70 Cel	3.3 V		-10 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B64	4	1.5 mm	8 mm	Not Qualified			4			e1	30	260	8 mm		0 ns
DS90LV028AHM/NOPB	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS			EIA-644; TIA-644	9 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	125 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2 Amp	TRUE	2			e3	30	260	4.9 mm		2.5 ns
DS90LV049QMTX/NOPB	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	AEC-Q100	2 ns	EIA-644-A; TIA-644-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	125 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	.01 Amp	COMPLEMENTARY	2		YES	e3	30	260	5 mm	.25 V	3.5 ns
DS90UB913ATRTVTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100						1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V				.5 mm	105 Cel	1.8 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm	5 mm				1		YES	e3	30	260	5 mm		0 ns
DS90UB929TRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			330 mA			1.89 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers	.00001 Amp		.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	9 mm	1.22 V
DS90UB947NTRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	1			AEC-Q100		GENERAL PURPOSE	469 mA	DIFFERENTIAL	1.1 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20			.00001 Amp	1.045 V	.5 mm	105 Cel		DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm		4 Amp	COMPLEMENTARY			YES	e4	30	260	9 mm	.63 V
DS90UH925QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1			AEC-Q100		ISO 10605	170 mA	STANDARD	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	3-STATE	-40 Cel	24	Matte Tin (Sn)	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		TRUE			YES	e3	NOT SPECIFIED	260	7 mm		0 ns
DS90UH925QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1			AEC-Q100		ISO 10605	170 mA	STANDARD	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V		-40 Cel	24	Matte Tin (Sn)	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified					YES	e3	NOT SPECIFIED	260	7 mm		0 ns
DS91M125TMAX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				8.5 ns		78 mA		3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.000015 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.91 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	9.9 mm		0 ns
DS92001TMAX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				2 ns		75 mA		3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.91 mm	Not Qualified			1		YES	e3	30	260	4.9 mm	.25 V	0 ns
DS92LV040ATLQAX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	44	VQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.3 ns	GENERAL PURPOSE	100 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		CHIP CARRIER, VERY THIN PROFILE	LCC44,.28SQ,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N44	2	.8 mm	7 mm	Not Qualified	4 Amp	TRUE	4		YES	e3	30	260	7 mm	.2 V	3.2 ns
DSLVDS1048PWR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V	3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.65 mm	85 Cel	3.3 V		-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm				4		NO	e3	30	260	5 mm		2.7 ns
LMH0001SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE	43 mA	DIFFERENTIAL	3.3 V	3.465 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.135 V	Line Driver or Receivers		3.135 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	1	.8 mm	4 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4 mm	.75 V	0 ns
LMH0071SQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	1					GENERAL PURPOSE	127 mA	DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm			COMPLEMENTARY	5		YES	e3	30	260	7 mm		0 ns
LMH0387SL	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	VQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, VERY THIN PROFILE					3.135 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-XQCC-N48		.9 mm	7 mm	Not Qualified			1		YES				7 mm
LMH6555SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	1					156 mA		3.3 V	3.63 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,20	2.97 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	3	.8 mm	4 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4 mm	2.4 V	0 ns
LT1030CDR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4		BIPOLAR			EIA-232-F; TIA-232-F	.1 mA	STANDARD	12 V	15 V	+-5/+-15	-12 V	SMALL OUTLINE	SOP14,.25	5 V	Line Driver or Receivers	.00002 Amp	5 V	1.27 mm	70 Cel	12 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.75 mm	3.9 mm	Not Qualified		INVERTED			NO	e4	NOT SPECIFIED	260	8.65 mm	3.3 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.