Line Drivers & Receivers

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ISL3232EIRZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		EIA-232; TIA-232; V.24; V.28		SCHMITT TRIGGER	3.15 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.8 mm	85 Cel			-40 Cel	2	MATTE TIN	QUAD	S-PQCC-N16	2	1 mm	5 mm				2		NO	e3	30	260	5 mm
LTC2852IMS#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	1	1.1 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
LTC2873IUFD#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	3000 ns	EIA-232		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.7 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	R-PQCC-N24	1	.8 mm	4 mm				1	CAN ALSO BE CONFIGURED AS RS-485/422 TRANSCEIVER	YES	e3	30	260	5 mm		200 ns
NCN5150MNTWG	Onsemi	LINE TRANSCEIVER						UNSPECIFIED													CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE												MATTE TIN			1									e3	30	260			0 ns
SN65LVDS100DGK	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	BIPOLAR	.8 ns	EIA-644-A; TIA-644-A	.033 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD SILVER	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified		TRUE	1		YES	e4	30	260	3 mm		.8 ns
AD8138ARMZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					1.4 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified					YES	e3	30	260	3 mm		0 ns
ADM2483BRW	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		620 ns	EIA-485-A; TIA-485-A; ISO 8482E		DIFFERENTIAL SCHMITT TRIGGER	3 V	5.25 V	3/5,5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers	.00001 Amp	2.7 V	1.27 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	4 Amp		1		YES	e0		240	10.3 mm	1.5 V	1050 ns
HI-8445PSI-10	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		ARINC 429	10 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	5 Amp		4	ARINC INPUTS INTERNALLY LIGHTNING PROTECTED	YES	e0	30	240	6.5 mm		0 ns
LTC2862HS8-2#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
SN65LBC176D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS	25 ns	EIA-485-A; TIA-485-A; ISO 8482	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	COMMON I/O: TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4	NOT SPECIFIED	260	4.9 mm	1.1 V	33 ns
LTC2865IMSE#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	12	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G12	1	1.1 mm	3 mm				1		YES	e3	30	260	4.039 mm		65 ns
LTC485CS8	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY	1	COMMON I/O; TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e0	20	235	4.9 mm		200 ns
MAX14841EATA+T	Analog Devices		AUTOMOTIVE	NO LEAD	8	SON	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS			4 mA		3.3 V		3.3		SMALL OUTLINE	SOLCC8,.12,25		Line Driver or Receivers			.635 mm	125 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-N8	1			Not Qualified	1 Amp				YES	e3	30	260		1.5 V	0 ns
MAX232D	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS		EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e4	NOT SPECIFIED	260	9.9 mm	10 V	0 ns
MAX3237EAI-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		EIA-232; EIA-562	2 mA	SCHMITT TRIGGER	5 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e0	20	240	10.2 mm	10 V	0 ns
MAX3237EAI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		EIA-232; EIA-562	2 mA	SCHMITT TRIGGER	5 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.4		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel			-40 Cel	5	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e3	30	260	10.2 mm	10 V	0 ns
SN65HVD1786DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		200 ns	EIA-485; TIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	1.5 V	200 ns
ADM2490EBRWZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		60 ns	EIA-485-A; TIA-485-A; ISO 8482	60 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3/5,5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers		2.7 V	1.27 mm	105 Cel	5 V		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified			1		YES	e3	30	260	10.3 mm	1.5 V	60 ns
ADM485ARMZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS	15 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.000001 Amp	4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	4 Amp		1	1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O; TRISTATABLE RECEIVERS	YES	e3		260	3 mm	1.5 V	30 ns
ISL32452EIUZ-T7A	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS	1000 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm				1		YES	e3	30	260	3 mm		325 ns
ISL83078EIBZA-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.75 mm	3.9 mm				1		YES	e3	30	260	4.9 mm		60 ns
LTC2862HS8-1#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
MAX3232CDWRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		300 ns	EIA-232-F	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP16,.4	3 V	Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel	3.3 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	.001 Amp	INVERTED	2	CAN ALSO OPERATE AT 5 V	NO	e4	NOT SPECIFIED	260	10.3 mm	10 V	300 ns
MAX232NS	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS		EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified			2	EXTERNAL CHARGE PUMP	NO	e4	30	260	10.2 mm
SN65HVD1786D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		200 ns	EIA-485; TIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	200 ns
ST232EBDR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		2000 ns	EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp		2		NO	e4		260	9.9 mm	10 V	10000 ns
ADA4932-1YCPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	1	BIPOLAR		GENERAL PURPOSE	5 mA	DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20				3 V	.5 mm	105 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm	3 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	3 mm	3.2 V
MAX232EINE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2			EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers		4.5 V	2.54 mm	85 Cel	5 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	10 V	0 ns
SN65HVD11D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS	40 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	1	SIGNALING RATE 10 MBPS	YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	70 ns
DS90LV019TMTC/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	7 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.1 mm	4.4 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	CAN ALSO OPERATE WITH A 5V SUPPLY	YES	e3	30	260	5 mm	.25 V	9 ns
ISL32601EFUZ	Renesas Electronics	LINE TRANSCEIVER																															MATTE TIN			2									e3	30	260
LTC2865HMSE#TRPBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	12	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G12	1	1.1 mm	3 mm				1		YES	e3	30	260	4.039 mm		65 ns
SN65HVD1176DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS	10 ns	EIA-485-A; TIA-485-A	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	.1 Amp		1		YES	e4	NOT SPECIFIED	260	4.9 mm	2.1 V	25 ns
SP485ECN-L	Exar	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS	60 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e3		260	4.9 mm	1.5 V	100 ns
MAX232DWRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS		EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e4	NOT SPECIFIED	260	10.3 mm	10 V	0 ns
ISO1432BDW	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		125 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE		3 V			1.71 V	1.27 mm	125 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm				1		YES	e4	30	260	10.3 mm		120 ns
ISO1450DW	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		41 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE		3 V			1.71 V	1.27 mm	125 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm				1		YES	e4	30	260	10.3 mm		60 ns
LMH0302SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1	BIPOLAR		GENERAL PURPOSE	59 mA	DIFFERENTIAL	3.3 V	3.46 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.13 V	Line Driver or Receivers		3.135 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	3	.8 mm	4 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4 mm	.72 V	0 ns
MAX3485ECSA-TG069	Maxim Integrated	LINE TRANSCEIVER
ISL3177EIUZ-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	2	1.1 mm	3 mm				1		YES	e3	30	260	3 mm
LTC2862AIDD-1#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N8		.8 mm	3 mm				1		YES	e3	30	260	3 mm		65 ns
LTC2862AIS8-2#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8		1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		700 ns
LTC2862IS8-2#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
MAX3250EAI	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS		EIA-232; TIA-232; V.24; V.28	35 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		2		NO	e0	20	240	10.2 mm	10 V	0 ns
MAX3250EAI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS		EIA-232; TIA-232; V.24; V.28	35 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	10.2 mm	10 V	0 ns
SN65HVS880PWPR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	34 V	1		10 ns	GENERAL PURPOSE	8.7 mA	STANDARD	24 V	30 V	24		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	18 V	Line Driver or Receivers		18 V	.65 mm	85 Cel	24 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	2	1.2 mm	4.4 mm	Not Qualified		TRUE			NO	e4	NOT SPECIFIED	260	9.7 mm	4 V	0 ns
SN65LBC176ADR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS	12 ns	EIA-485-A; TIA-485-A; ISO 8482	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e4	NOT SPECIFIED	260	4.9 mm	1 V	20 ns
ISL83072EIBZA	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS	1500 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.75 mm	3.9 mm				1		YES	e3	30	260	4.9 mm		120 ns

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.