Line Drivers & Receivers

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
LTC485CN8#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	CMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1	MATTE TIN	DUAL	R-PDIP-T8	1	3.937 mm	7.62 mm	Not Qualified		COMPLEMENTARY	1	COMMON I/O; TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e3	30	260			200 ns
MAX3280EAUK/V+T	Analog Devices	LINE RECEIVER	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	AEC-Q100		EIA-422; EIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37				3 V	.95 mm	125 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G5	1	1.45 mm	1.625 mm	Not Qualified	4 Amp		1		NO	e3	30	260	2.9 mm		15 ns
SN65LBC172A16DWRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482		STANDARD	5 V		5	SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified					YES	e4	30	260	10.3 mm	1 V	0 ns
TRS3232ECPWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	2	ALSO OPERATES AT 5V SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm	10 V	0 ns
AM26C32CDR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm		27 ns
MAX3232CAE	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232; EIA-562	1 mA	SCHMITT TRIGGER	5 V		3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		2		NO	e0			6.2 mm	10 V	0 ns
MAX3232CAE+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232; EIA-562	1 mA	SCHMITT TRIGGER	5 V		3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	6.2 mm	10 V	0 ns
P82B96DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	BIPOLAR			GENERAL PURPOSE	2 mA	STANDARD	5 V	15 V	2/15	SMALL OUTLINE	SOP8,.25	2 V	Other Interface ICs		2 V	1.27 mm	85 Cel	2.5 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			2		NO	e4	NOT SPECIFIED	260	4.9 mm		0 ns
SN65MLVD201DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2.4 ns	EIA-899; TIA-899	26 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	.01 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	.48 V	6 ns
AM26C31IPW	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3 mA	STANDARD	5 V	5.5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	20 Amp				YES	e4	30	260	5 mm	2 V	0 ns
DS90UB949TRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100			330 mA			1.89 V	1.1,1.8	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm	1.197 V
LTC2862AIS8-1#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8		1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
LTC2871IUHF#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	38	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		70 ns	EIA-232; EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.7 V	.5 mm	85 Cel	3.3 V		-40 Cel	3	Matte Tin (Sn) - annealed	QUAD	R-PQCC-N38	1	.8 mm	5 mm	Not Qualified			3		YES	e3	30	260	7 mm		200 ns
MAX3097ECSE	Maxim Integrated	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS			EIA-422; EIA-485	4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		3.3/5	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	70 Cel			0 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		3			e0			9.9 mm		85 ns
MAX3097ECSE+	Analog Devices	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			3			e3	30	260	9.9 mm		85 ns
SN65C1167EPWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			16 ns	EIA-422-B; TIA-422-B; V.11	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	85 Cel	5 V	3-STATE	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	20 Amp	TRUE	2		YES	e4	30	260	5 mm	2 V	27 ns
SN65HVD1785P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1			2000 ns	EIA-485; TIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	200 ns
SN65HVD3085EDR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		500 ns	EIA-485-A; TIA-485-A	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	200 ns
THVD1551DGKR	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1			16 ns	EIA-485-A; TIA-485-A	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4.5 V			4.5 V	.65 mm	125 Cel	5 V		-40 Cel	1	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm				1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	3 mm		45 ns
ISL83491IBZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		35 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	3	1.75 mm	3.9 mm				1		YES	e3	30	260	8.65 mm		90 ns
MAX3232ECDBRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	.001 Amp		2	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e4	30	260	6.2 mm	10 V	0 ns
SN65LBC172A16DWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5	SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified					YES	e4	30	260	10.3 mm	1 V	0 ns
SN65LVDS33PWR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	4 Amp	TRUE	4		NO	e4	30	260	5 mm		6 ns
ADM3095ETRZ-EP	Analog Devices	LINE TRANSCEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			500 ns	EIA-485; TIA-485		DIFFERENTIAL SCHMITT TRIGGER	3 V			SMALL OUTLINE					1.62 V	1.27 mm	125 Cel			-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	3	1.75 mm	3.9 mm				1		YES	e4			9.9 mm		220 ns
DS90UH949TRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	2		AEC-Q100		I2C	330 mA	DIFFERENTIAL	1.1 V	1.155 V	1.1,1.8	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.045 V	Line Driver or Receivers		1.045 V	.5 mm	105 Cel	1.1 V	DIFFERENTIAL	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N64	3	1 mm	9 mm	Not Qualified		COMPLEMENTARY		ALSO REQ 1.71 TO 1.89V AND 3.135 TO 3.465V	YES	e4	30	260	9 mm
FIN1027AMX	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					YES	e4	30	260	4.9 mm	.25 V
ISL3178EIUZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	2	1.1 mm	3 mm				1		YES	e3	30	260	3 mm
MAX202IDWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.28	15 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel	5 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	10.3 mm	10 V	10000 ns
MAX3394EETA+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	5.5 V	1	BICMOS			GENERAL PURPOSE		STANDARD	3.3 V		1.8/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25		Other Interface ICs		1.65 V	.65 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	S-XDSO-N8	1	.8 mm	3 mm	Not Qualified			1		NO	e3	30	260	3 mm		0 ns
P82B96TD/G,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	BIPOLAR			GENERAL PURPOSE	4 mA	STANDARD	5 V		2/15	SMALL OUTLINE	SOP8,.25		Other Interface ICs		2 V	1.27 mm	85 Cel			-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			2		NO	e4			4.9 mm
SN65MLVD206DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2.4 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	.48 V	6 ns
IL3122E	Nve	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			65 ns	EIA-422	7 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5,5	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.0008 Amp	3 V	1.25 mm	85 Cel	5 V		-40 Cel	1		DUAL	R-PDSO-G16		2.67 mm	7.455 mm	Not Qualified	4 Amp		1		YES		NOT SPECIFIED	NOT SPECIFIED	10.3 mm	1.5 V	85 ns
ISL32478EIBZ-T7A	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		45 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	2	1.75 mm	3.9 mm				1		YES	e3	30	260	4.9 mm		70 ns
LTC1535CSW#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		1560 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V	7.5 V		SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	70 Cel	5 V		0 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified			1		YES	e3	30	260	17.9 mm		855 ns
LTC2863HDD-1#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N8	1	.8 mm	3 mm				1		YES	e3	30	260	3 mm		65 ns
MAX14948EWE+	Analog Devices	LINE TRANSCEIVER		GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BIMOS		1040 ns	EIA-485; EIA-422	6.6 mA	SCHMITT TRIGGER	3.3 V			SMALL OUTLINE	SOP16,.4				1.71 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm		4 Amp	COMPLEMENTARY	1		YES	e3	30	260	10.3 mm	3 V	240 ns
ADM1485ARMZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		15 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1	THERMAL SHUTDOWN PROTECTION	YES	e3	30	260	3 mm		30 ns
ISL81487IBZ-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		50 ns	EIA-422; EIA-485	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE	SOP8,.25			.000002 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.75 mm	3.9 mm		4 Amp		1		YES	e3	30	260	4.9 mm		150 ns
ISO15DW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			340 ns	EIA-422; TIA-422; EIA-485; TIA-485	19 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.4	3.15 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified			1		YES	e4	30	260	10.3 mm	1.5 V	100 ns
MAX232EESE-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS			EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0	20	240	10.3 mm	10 V	10000 ns
MAX232EESE+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS			EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e3	30	260	9.9 mm	10 V	10000 ns
MAX232IDWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS			EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e4	NOT SPECIFIED	260	10.3 mm	10 V	0 ns
SN65HVD1780P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1			2000 ns	EIA-485-A; TIA-485-A	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3.3/5	IN-LINE	DIP8,.3	3.15 V	Line Driver or Receivers		3.15 V	2.54 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	.8 V	200 ns
SN65LVDS31D	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		TRUE			YES	e4	NOT SPECIFIED	260	9.9 mm	.247 V	0 ns
ADM489ARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		2000 ns	EIA-422; EIA-485	.074 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e3	30	260	8.65 mm	1.5 V	2000 ns
ADV7611WBSWZ-RL	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	64	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1	CMOS	AEC-Q100		GENERAL PURPOSE		STANDARD	1.8 V			FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH					1.71 V	.5 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified			1		NO	e3	30	260	10 mm		0 ns
LTC2854CDD#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	10	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	S-PDSO-N10	1	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
MAX3221ECAE+TG071	Maxim Integrated	LINE TRANSCEIVER																															MATTE TIN			1									e3	30	260

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.