Other Function Interface ICs

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	No. of Bits	Interface Standard	Maximum Supply Current	Output Latch/Register	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
SI8421AD-D-ISR	Silicon Labs	INTERFACE CIRCUIT		GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS	AEC-Q100					5 V			SMALL OUTLINE	SOP16,.4			2.7 V	1.27 mm	125 Cel			-40 Cel		DUAL	R-PDSO-G16	2A	2.65 mm	7.5 mm						10.3 mm
SI8602AB-B-IS	Silicon Labs	INTERFACE CIRCUIT	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			AEC-Q100					3.3 V			SMALL OUTLINE				3 V	1.27 mm	125 Cel			-40 Cel	TIN	DUAL	R-PDSO-G8	2A	1.75 mm	3.9 mm			e3	40	260	4.9 mm
TFBS4711	Vishay Intertechnology	INTERFACE CIRCUIT	OTHER	UNSPECIFIED	6		RECTANGULAR	UNSPECIFIED	NO	5.5 V	1		CMOS						5 V	5.5 V		MICROELECTRONIC ASSEMBLY		2.4 V		2.4 V	.95 mm	85 Cel	5 V		-25 Cel		SINGLE	R-XSMA-X6		2 mm	3 mm				NOT SPECIFIED	NOT SPECIFIED	6 mm
TOIM4232	Vishay Intertechnology	INTERFACE CIRCUIT	OTHER	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS						3.3 V			SMALL OUTLINE				2.7 V	1.27 mm	85 Cel			-25 Cel	MATTE TIN	DUAL	R-PDSO-G16	3	2.7 mm	7.4 mm	Not Qualified		e3		260	10.3 mm
TXS0101DBVR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				1		.0144 mA		1.8 V		1.8/3.3,2.5/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		Other Interface ICs	1.65 V	.95 mm	85 Cel		3-STATE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.45 mm	1.6 mm	Not Qualified	ALSO OPERATES WITH 2.3 TO 5.5 VOLT	e4	30	260	2.9 mm
TXS0101DBVRG4	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				1		.0144 mA		1.8 V		1.8/3.3,2.5/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		Other Interface ICs	1.65 V	.95 mm	85 Cel		3-STATE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.45 mm	1.6 mm	Not Qualified	ALSO OPERATES WITH 2.3 TO 5.5 VOLT	e4	30	260	2.9 mm
XISO6740QDWRQ1	Texas Instruments	INTERFACE CIRCUIT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS	AEC-Q100					1.8 V			SMALL OUTLINE	SOP16,.4			1.71 V	1.27 mm	125 Cel			-40 Cel		DUAL	R-PDSO-G16		2.65 mm	7.5 mm		ALSO REQUIRE SUPPLY FROM 2.25V TO 5.5V				10.3 mm
ADUM5403WCRWZ-1RL	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			AEC-Q100					3.3 V			SMALL OUTLINE				3 V	1.27 mm	105 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	3	2.65 mm	7.5 mm			e3	30	260	10.3 mm
ASI4UE-G1-ST	Renesas Electronics	INTERFACE CIRCUIT	OTHER	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	33.1 V	1		CMOS						30 V			SMALL OUTLINE, SHRINK PITCH				16 V	.65 mm	85 Cel			-25 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm			e3	30	260	10.2 mm
CDM10VD3XTSA1	Infineon Technologies	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	25 V	1											SMALL OUTLINE, LOW PROFILE, SHRINK PITCH				11 V	.95 mm	105 Cel			-40 Cel	TIN	DUAL	R-PDSO-G6	1	1.45 mm	1.6 mm			e3			2.9 mm
HI-8423PTTF	Holt Integrated Circuits	INTERFACE CIRCUIT	MILITARY	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS						5 V			SMALL OUTLINE, SHRINK PITCH				4.5 V	.65 mm	125 Cel			-55 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G20	1	2.089 mm	4.4 mm	Not Qualified		e3	40	260	6.5 mm
ISO6763QDWRQ1	Texas Instruments	INTERFACE CIRCUIT		GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	6	6	CMOS	AEC-Q100					1.8 V			SMALL OUTLINE				1.71 V	1.27 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm		ALSO REQUIRE SUPPLY FROM 2.25V TO 5.5V	e4		260	10.3 mm
ISO7241ADW	Texas Instruments	DIGITAL ISOLATOR	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	4							3.3 V			SMALL OUTLINE	SOP16,.4			3.15 V	1.27 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	ALSO REQUIRES 4.5V TO 5.5V SUPPLY	e4	30	260	10.3 mm
ISO7640FMDW	Texas Instruments	INTERFACE CIRCUIT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5 V	4	4							3.3 V			SMALL OUTLINE				2.7 V	1.27 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	3	2.65 mm	7.5 mm	Not Qualified	ALSO OPERATES WITH 5 V SUPPLY	e4	30	260	10.3 mm
ISO7730DBQR	Texas Instruments	INTERFACE CIRCUIT	MILITARY	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	3	CMOS						2.5 V			SMALL OUTLINE, SHRINK PITCH				2.25 V	.635 mm	125 Cel			-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	1.75 mm	3.895 mm		ALSO REQUIRED VCC2 2.25-5.5V SUPPLY; ALSO OPERATE WITH 3.3V AND 5V SUPPLY	e4	30	260	4.905 mm
ISO7731FBDW	Texas Instruments	INTERFACE CIRCUIT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	3	CMOS						2.5 V			SMALL OUTLINE				2.25 V	1.27 mm	125 Cel			-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm			e4	30	260	10.3 mm
MAX3373EEKA-TG077	Maxim Integrated	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS						1.8 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH				1.2 V	.65 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G8		1.45 mm	1.625 mm				NOT SPECIFIED	NOT SPECIFIED	2.9 mm
MAX3391EEUD	Maxim Integrated	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS						3.3 V		1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25		Other Interface ICs	1.65 V	.65 mm	85 Cel			-40 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	1.1 mm	4.4 mm	Not Qualified	USED FOR SPI, MICROWIRE AND I2C LEVEL TRANSLATION	e0			5 mm
NVT2002GD,125	NXP Semiconductors	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.4 V	1									5.5 V		SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.12,20	0 V		0 V	.5 mm	85 Cel			-40 Cel		DUAL	R-PDSO-N8	1	.5 mm	2 mm		SEATED HGT-NOM		30	260	3 mm
PCA9574BS,118	NXP Semiconductors	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS						2.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				1.1 V	.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	1	1 mm	3 mm	Not Qualified		e4	30	260	3 mm
PI74STX2G4245UX	Pericom Semiconductor	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1								1.8 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.3 V		1.65 V	.65 mm	85 Cel			-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified		e0			3 mm
SI8442AB-D-IS	Silicon Labs	INTERFACE CIRCUIT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1		CMOS									SMALL OUTLINE					1.27 mm						DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified			NOT SPECIFIED	NOT SPECIFIED	10.3 mm
SI8661BB-B-IUR	Silicon Labs	DIGITAL ISOLATOR		GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	AEC-Q100					5 V			SMALL OUTLINE, SHRINK PITCH	SSOP16,.25			2.375 V	.635 mm	125 Cel			-40 Cel		DUAL	R-PDSO-G16		1.75 mm	3.9 mm						4.89 mm
TPS25810RVCR	Texas Instruments	INTERFACE CIRCUIT	AUTOMOTIVE	NO LEAD	20	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1								3.3 V	5.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4.5 V		2.9 V	.5 mm	125 Cel	5 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	R-PQCC-N20	2	.8 mm	3 mm			e4	30	260	4 mm
TXU0204RUTR	Texas Instruments	INTERFACE CIRCUIT	AUTOMOTIVE	NO LEAD	12	VQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				4		.006 mA		1.1 V			CHIP CARRIER, VERY THIN PROFILE				1.08 V	.4 mm	125 Cel		3-State	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N12	1	.55 mm	1.7 mm			e4		260	2 mm
XISO6731FDWR	Texas Instruments	INTERFACE CIRCUIT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1.89 V	3								1.8 V			SMALL OUTLINE	SOP16,.3			1.71 V	1.27 mm	125 Cel			-40 Cel		DUAL	R-PDSO-G16		2.65 mm	7.5 mm		ALSO REQUIRE SUPPLY FROM 2.25V TO 5.5V				10.3 mm
XISOUSB111DWXR	Texas Instruments	INTERFACE CIRCUIT		GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1								5 V			SMALL OUTLINE, SHRINK PITCH	SSOP16,.4			4.25 V	.65 mm	125 Cel			-40 Cel		DUAL	R-PDSO-G16		2.6 mm	5.85 mm						7.5 mm
1756-IB16IK	Rockwell Automation	DIGITAL I/O MODULE		UNSPECIFIED		DMA	RECTANGULAR	UNSPECIFIED	NO	30 V	1								12 V			MICROELECTRONIC ASSEMBLY				10 V		60 Cel			0 Cel		DUAL	R-XDMA-X
750-430	Wago	Digital I/P Module
ADUM1281CRZ-RL7	Analog Devices	DIGITAL ISOLATOR	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS						3.3 V			SMALL OUTLINE	SOP8,.25			3.135 V	1.27 mm	125 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm			e3	30	260	4.9 mm
ADUM142E1WBRQZ-RL7	Analog Devices	DIGITAL ISOLATOR	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS	AEC-Q100					1.8 V			SMALL OUTLINE, SHRINK PITCH	SSOP16,.25			1.7 V	.64 mm	125 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	3	1.75 mm	3.91 mm		IT ALSO OPERATES AT 2.5, 3.3, 5 V	e3		260	4.9 mm
ADUM6421ABRNZ3-RL	Analog Devices	INTERFACE CIRCUIT		GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1								3.3 V			SMALL OUTLINE, SHRINK PITCH	SSOP28,.4			3 V	.65 mm	125 Cel			-40 Cel		DUAL	R-PDSO-G28		2.65 mm	7.5 mm						10.3 mm
IL711-3ETR7	Nve	DIGITAL ISOLATOR		GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS						3.3 V			SMALL OUTLINE	SOP8,.25			2.7 V	1.27 mm	100 Cel			-40 Cel		DUAL	R-PDSO-G8		1.87 mm	3.9 mm						4.885 mm
ISO7220AQDRQ1	Texas Instruments	INTERFACE CIRCUIT	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5 V	1	2		AEC-Q100								SMALL OUTLINE				3.3 V	1.27 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	3	1.75 mm	3.9 mm	Not Qualified		e4	30	260	4.9 mm
ISO7420MD	Texas Instruments	INTERFACE CIRCUIT	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5 V	2	2							3.3 V			SMALL OUTLINE				3.3 V	1.27 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.895 mm		ALSO OPERATES WITH 4.75V TO 5.25V	e4	30	260	4.905 mm
LSF0102YZTR	Texas Instruments	INTERFACE CIRCUIT	AUTOMOTIVE	BALL	8	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	4.5 V	1				2		.0125 mA	LATCH	3.3 V	5.5 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	1.8 V		1 V	.5 mm	125 Cel	3.3 V	OPEN-DRAIN	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	R-PBGA-B8	1	.625 mm	.888 mm			e1	NOT SPECIFIED	260	1.888 mm
MAX22444CAWE+	Analog Devices	INTERFACE CIRCUIT		GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS						3.3 V			SMALL OUTLINE	SOP16,.4			1.71 V	1.27 mm	125 Cel			-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	3	2.65 mm	7.5 mm			e3	30	260	10.3 mm
NCN8026AMNTXG	Onsemi	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	1								3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				2.7 V	.5 mm	85 Cel			-40 Cel	MATTE TIN	QUAD	S-XQCC-N24	1	1 mm	4 mm		IT ALSO OPERATES AT 5V, REQUIRES VDDP=5	e3	30	260	4 mm
PCA9306GM,125	NXP Semiconductors	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	8	VQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2								1.8 V	5.5 V		CHIP CARRIER, VERY THIN PROFILE	LCC8,.06SQ,20	1.8 V	Other Interface ICs	1 V	.55 mm	85 Cel	2.5 V		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N8	1	.5 mm	1.6 mm	Not Qualified		e4	30	260	1.6 mm
PCA9509ADP	NXP Semiconductors	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	2 V	1								1.1 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				.8 V	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm			e4			3 mm
PCA9509DP	NXP Semiconductors	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		CMOS						5 V		3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	3 V	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified		e4	30	260	3 mm
PCA9559PW,112	NXP Semiconductors	INTERFACE CIRCUIT	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS						3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25			3 V	.65 mm	70 Cel			0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm				30	260	6.5 mm
SI8661BD-B-IS2R	Silicon Labs	DIGITAL ISOLATOR		GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	AEC-Q100					5 V			SMALL OUTLINE	SOP16,.4			2.375 V	1.27 mm	125 Cel			-40 Cel		DUAL	R-PDSO-G16		2.65 mm	7.5 mm						10.3 mm
SI88242ED-IS	Silicon Labs	INTERFACE CIRCUIT																																	3						40	260
TFDU4301-TT1	Vishay Intertechnology	INTERFACE CIRCUIT	OTHER	UNSPECIFIED	8		RECTANGULAR	UNSPECIFIED	NO	5.5 V	1		CMOS						5 V	5.5 V		MICROELECTRONIC ASSEMBLY		2.4 V		2.4 V	.95 mm	85 Cel	5 V		-30 Cel	MATTE TIN	SINGLE	R-XSMA-X8	4	3.1 mm	2.5 mm	Not Qualified		e3	10	260	8.5 mm
6ES7132-6BD20-0BA0	Siemens	Digital O/P Module
ADG3300BRUZ	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1										1.2/5,1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Other Interface ICs	1.15 V	.65 mm	85 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified		e3		260	6.5 mm
ADUM1300BRWZ-RL	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS			EIA-232; EIA-422; EIA-485			3 V			SMALL OUTLINE	SOP16,.4			2.7 V	1.27 mm	105 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified		e3	30	260	10.3 mm

Other function interface ICs are electronic components that provide specific functions for interfacing different devices in electronic systems. They are designed to facilitate the exchange of data and signals between various components of the system.

Other function interface ICs can be classified into several types based on their specific functions and applications. Some of the most common types of interface ICs include:

1. Voltage level translators - These ICs are used to convert voltage levels between different devices in electronic systems, ensuring that signals are compatible and can be correctly interpreted.

2. Real-time clock (RTC) ICs - These ICs are used to keep track of time and date in electronic systems, and they typically include a battery backup to ensure that the clock remains accurate even if the main power supply is lost.

3. Touchscreen controllers - These ICs are used to interface with touchscreens and enable touch-based input in electronic systems.

Other function interface ICs can also include USB controllers, Ethernet controllers, and Bluetooth controllers, among other components. They are typically characterized by their data rate, power consumption, and specific functions.