FB BASED PERIPHERAL DRIVER WITH PWM Peripheral Drivers 7

Reset All
Part RoHS Manufacturer Interface IC Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Display Mode Data Input Mode Surface Mount Maximum Supply Voltage Maximum Output Current No. of Functions No. of Channels Technology Screening Level No. of Bits Built-in Protections Maximum Supply Current No. of Digits/Characters Input Characteristics Nominal Supply Voltage Maximum Supply Voltage-1 Turn-on Time Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code No. of Segments Minimum Supply Voltage-1 Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Nominal Supply Voltage-1 Output Characteristics Minimum Operating Temperature Driver No. of Bits Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Nominal Output Peak Current Limit Width Turn-off Time Qualification Output Polarity High Side Driver Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Output Current Flow Direction Length Multiplexed Display Capability

L9958XP

STMicroelectronics

FB BASED PERIPHERAL DRIVER WITH PWM

GULL WING

24

RECTANGULAR

PLASTIC/EPOXY

YES

SMALL OUTLINE

Tin (Sn)

DUAL

R-PDSO-G24

3

Not Qualified

e3

30

260

SOURCE AND SINK

L9958SB

STMicroelectronics

FB BASED PERIPHERAL DRIVER WITH PWM

GULL WING

16

RECTANGULAR

PLASTIC/EPOXY

YES

SMALL OUTLINE

Matte Tin (Sn) - annealed

DUAL

R-PDSO-G16

3

Not Qualified

e3

30

250

SOURCE AND SINK

VND670SP13TR

STMicroelectronics

FB BASED PERIPHERAL DRIVER WITH PWM

AUTOMOTIVE

GULL WING

10

HSOP

RECTANGULAR

PLASTIC/EPOXY

YES

26 V

1

CMOS

TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE

13 V

150 us

9/18

SMALL OUTLINE, HEAT SINK/SLUG

SOP10,.55FL

MOSFET Drivers

5.5 V

1.27 mm

150 Cel

-40 Cel

MATTE TIN

DUAL

R-PDSO-G10

3.75 mm

45 A

7.5 mm

135 us

Not Qualified

e3

SOURCE AND SINK

9.4 mm

L9958

STMicroelectronics

FB BASED PERIPHERAL DRIVER WITH PWM

GULL WING

20

RECTANGULAR

PLASTIC/EPOXY

YES

SMALL OUTLINE

MATTE TIN

DUAL

R-PDSO-G20

3

Not Qualified

e3

245

SOURCE AND SINK

VND670SP

STMicroelectronics

FB BASED PERIPHERAL DRIVER WITH PWM

AUTOMOTIVE

GULL WING

10

HSOP

RECTANGULAR

PLASTIC/EPOXY

YES

26 V

1

CMOS

TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE

13 V

150 us

9/18

SMALL OUTLINE, HEAT SINK/SLUG

SOP10,.55FL

MOSFET Drivers

5.5 V

1.27 mm

150 Cel

-40 Cel

MATTE TIN

DUAL

R-PDSO-G10

3.75 mm

45 A

7.5 mm

135 us

Not Qualified

e3

SOURCE AND SINK

9.4 mm

935309953518

NXP Semiconductors

FB BASED PERIPHERAL DRIVER WITH PWM

MC33931VW/R2

NXP Semiconductors

FB BASED PERIPHERAL DRIVER WITH PWM

AUTOMOTIVE

GULL WING

44

HSSOP

RECTANGULAR

PLASTIC/EPOXY

YES

28 V

1

OVER CURRENT; THERMAL

14 V

18 us

SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH

8 V

.65 mm

125 Cel

-40 Cel

DUAL

R-PDSO-G44

3

3.4 mm

5 A

11 mm

12 us

Not Qualified

30

245

SOURCE

15.9 mm

Peripheral Drivers

Peripheral drivers are electronic components that control and drive the operation of peripheral devices in electronic systems, such as motors, sensors, and actuators. They are commonly used in industrial and commercial applications that require precise and reliable control of peripheral devices.

Peripheral drivers can be classified into several types based on their specific functions and applications, including motor drivers, sensor drivers, and actuator drivers. These drivers can also include power supplies, amplifiers, and motor controllers, among other components.

Motor drivers are used to control and drive the operation of DC and stepper motors, and they typically include a microcontroller, power MOSFETs, and protection circuitry. Sensor drivers are used to interface with and drive sensors, which are electronic devices that detect and respond to physical stimuli. They typically include an analog-to-digital converter and signal conditioning circuitry. Actuator drivers are used to control and drive the operation of actuators, which are devices that produce a mechanical motion when energized. They are commonly used in industrial automation and control applications.

Peripheral drivers are typically characterized by their voltage and current ratings, as well as their efficiency and reliability. They play a critical role in ensuring the precise and reliable control of peripheral devices in electronic systems.