CLOCK DRIVER Clock Drivers & Buffers 218

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
85357AGI-01T	Renesas Electronics	CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			3.3	3.3	0	SMALL OUTLINE	TSSOP20,.25	1.5 ns		Clock Drivers	.65 mm	85 Cel			-40 Cel	Tin/Lead (Sn85Pb15)	1	DUAL	750 MHz	R-PDSO-G20	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V		e0	20	240	6.5 mm	5V
5V2310NRI	Renesas Electronics	CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	QCCN	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS	2.5	2.5/3.3	0	CHIP CARRIER	LCC20/24,.14X.18,20	3.5 ns	6 Amp	Clock Drivers	.5 mm	85 Cel	SERIES-RESISTOR	.1 ns	-40 Cel	TIN LEAD	10	QUAD	200 MHz	R-PQCC-N20		2.7 V			Not Qualified	2.3 V	ALSO OPERATES AT 3.3V SUPPLY	e0				5V
8520DYI-02	Renesas Electronics	CLOCK DRIVER	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3	1.8,3.3	0	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	1.6 ns		Clock Drivers	.5 mm	85 Cel		.11 ns	-40 Cel	TIN LEAD	16	QUAD		S-PQFP-G48		3.465 V	1.2 mm	7 mm	Not Qualified	3.135 V		e0			7 mm	8520
87159AGLFT	Renesas Electronics	CLOCK DRIVER	OTHER	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	600000000 Hz		3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3.6 ns		Prescaler/Multivibrators	.5 mm	85 Cel	3-STATE	.11 ns	0 Cel	Matte Tin (Sn) - annealed	8	DUAL		R-PDSO-G56	1	3.465 V	1.2 mm	6.1 mm	Not Qualified	3.135 V		e3	30	260	14 mm	87159
8CM0154DCGI8	Renesas Electronics	CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			1.5	2.5/3.3	0	SMALL OUTLINE	SOP8,.25	2.7 ns	12 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.25 ns	-40 Cel		4	DUAL	160 MHz	R-PDSO-G8		1.6 V	1.7272 mm	3.9 mm	Not Qualified	1.4 V			NOT SPECIFIED	260	4.9 mm	8CM0154
671G-15T	Renesas Electronics	CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2		CMOS	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.5 ns			.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	TIN LEAD	6	DUAL	66 MHz	R-PDSO-G24	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V	ONE FUNCTION HAS TWO OUTPUTS	e0	20	240	7.8 mm	671
8523CGI	Renesas Electronics	CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	1.6 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	4	DUAL	650 MHz	R-PDSO-G20	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V		e0	20	240	6.5 mm	8523
8737-11PGG	Renesas Electronics	CLOCK DRIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	2			3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	1.7 ns		Clock Drivers	.65 mm	70 Cel		.06 ns	0 Cel	Matte Tin (Sn) - annealed	4	DUAL	650 MHz	R-PDSO-G20	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V		e3	30	260	6.5 mm	8737
671G-15	Renesas Electronics	CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2		CMOS	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.5 ns			.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	TIN LEAD	6	DUAL	66 MHz	R-PDSO-G24	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V	ONE FUNCTION HAS TWO OUTPUTS	e0	20	240	7.8 mm	671
814253BGLF	Renesas Electronics	CLOCK DRIVER
87001BG-01T	Renesas Electronics	CLOCK DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1			2.5	2.5/3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	5 ns		Clock Drivers	.65 mm	70 Cel	3-STATE		0 Cel	TIN LEAD	1	DUAL	250 MHz	R-PDSO-G16	1	2.625 V	1.2 mm	4.4 mm	Not Qualified	2.375 V	ALSO OPERATES ON 3.3V SUPPLY	e0	20	240	5 mm	87001
8537AY-01	Renesas Electronics	CLOCK DRIVER	OTHER	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	6			3.3	2.5/3.3	2	FLATPACK	QFP48,.35SQ,20	1.5 ns		Clock Drivers	.5 mm	85 Cel		.13 ns	0 Cel	TIN LEAD	2	QUAD	700 MHz	S-PQFP-G48		3.465 V	1.6 mm	7 mm	Not Qualified	2.375 V		e0			7 mm	5V
850S1201AGILFT	Renesas Electronics	CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1			3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	85 Cel			-40 Cel	MATTE TIN	1	DUAL	250 MHz	R-PDSO-G20		3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V		e3			6.5 mm	850
87002AG-02T	Renesas Electronics	CLOCK DRIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			2.5	2.5/3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	6.7 ns		Clock Drivers	.65 mm	70 Cel		.035 ns	0 Cel	TIN LEAD	2	DUAL	15.625 MHz	R-PDSO-G20	1	2.625 V	1.2 mm	4.4 mm	Not Qualified	2.375 V	ALSO OPERATES AT 3.3V SUPPLY	e0	20	240	6.5 mm	87002
87159AG	Renesas Electronics	CLOCK DRIVER	OTHER	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	600000000 Hz		3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3.6 ns		Prescaler/Multivibrators	.5 mm	85 Cel	3-STATE	.11 ns	0 Cel	Tin/Lead (Sn85Pb15)	8	DUAL		R-PDSO-G56	1	3.465 V	1.2 mm	6.1 mm	Not Qualified	3.135 V		e0	20	240	14 mm	87159
8701AYI-01LF	Renesas Electronics	CLOCK DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	MUX	4			3.3	2.5/3.3,3.3	0	FLATPACK	QFP48,.35SQ,20	3.5 ns		Clock Drivers	.5 mm	85 Cel		.3 ns	-40 Cel	Matte Tin (Sn) - annealed	5	QUAD	250 MHz	S-PQFP-G48	3	3.465 V	1.6 mm	7 mm	Not Qualified	3.135 V		e3	30	260	7 mm	5V
8701AYI-01LFT	Renesas Electronics	CLOCK DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	MUX	4			3.3	2.5/3.3,3.3	0	FLATPACK	QFP48,.35SQ,20	3.5 ns		Clock Drivers	.5 mm	85 Cel		.3 ns	-40 Cel	Matte Tin (Sn) - annealed	5	QUAD	250 MHz	S-PQFP-G48	3	3.465 V	1.6 mm	7 mm	Not Qualified	3.135 V		e3	30	260	7 mm	5V
8701AYI-01T	Renesas Electronics	CLOCK DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	MUX	4			3.3	2.5/3.3,3.3	0	FLATPACK	QFP48,.35SQ,20	3.5 ns		Clock Drivers	.5 mm	85 Cel		.3 ns	-40 Cel	Tin/Lead (Sn85Pb15)	5	QUAD	250 MHz	S-PQFP-G48	3	3.465 V	1.6 mm	7 mm	Not Qualified	3.135 V		e0	20	240	7 mm	5V
8701AY-01T	Renesas Electronics	CLOCK DRIVER	COMMERCIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		CMOS	3.3	2.5/3.3,3.3	5	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	3.5 ns		Clock Drivers	.5 mm	70 Cel	3-STATE	.3 ns	0 Cel	Tin/Lead (Sn85Pb15)	15	QUAD		S-PQFP-G48	3	3.465 V	1.6 mm	7 mm	Not Qualified	3.135 V	SELECTABLE INVERTING AND NON-INVERTING OUTPUTS	e0	20	240	7 mm	8701
85108AGIT	Renesas Electronics	CLOCK DRIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25			Clock Drivers	.65 mm	85 Cel		.08 ns	-40 Cel	TIN LEAD	8	DUAL	500 MHz	R-PDSO-G24	1	3.63 V	1.2 mm	4.4 mm	Not Qualified	2.97 V		e0	20	240	7.8 mm	85108
49FCT20805NDGI	Renesas Electronics	CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	2		CMOS	2.5	2.5	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.11SQ,16	3 ns	8 Amp	Clock Drivers	.4 mm	85 Cel	3-STATE	.27 ns	-40 Cel	Matte Tin (Sn)	5	QUAD		S-XQCC-N20	1	2.7 V	1 mm	7 mm	Not Qualified	2.3 V		e3	30	260	7 mm	FCT
8701AYI-01	Renesas Electronics	CLOCK DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	MUX	4			3.3	2.5/3.3,3.3	0	FLATPACK	QFP48,.35SQ,20	3.5 ns		Clock Drivers	.5 mm	85 Cel		.3 ns	-40 Cel	Tin/Lead (Sn85Pb15)	5	QUAD	250 MHz	S-PQFP-G48	3	3.465 V	1.6 mm	7 mm	Not Qualified	3.135 V		e0	20	240	7 mm	5V
8737-11PGG8	Renesas Electronics	CLOCK DRIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	1.7 ns		Clock Drivers	.65 mm	70 Cel		.06 ns	0 Cel	Matte Tin (Sn) - annealed	4	DUAL		R-PDSO-G20	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V		e3	30	260	6.5 mm	8737
5V50013PGG	Renesas Electronics	CLOCK DRIVER	COMMERCIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel			0 Cel	Matte Tin (Sn) - annealed	1	DUAL	140 MHz	R-PDSO-G8	1	3.63 V	1.2 mm	3 mm	Not Qualified	2.97 V		e3	30	260	4.4 mm	5V
5V50013PGG8	Renesas Electronics	CLOCK DRIVER	COMMERCIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel			0 Cel	Matte Tin (Sn) - annealed	1	DUAL	140 MHz	R-PDSO-G8	1	3.63 V	1.2 mm	3 mm	Not Qualified	2.97 V		e3	30	260	4.4 mm	5V
5T93GL101PFGI8	Renesas Electronics	CLOCK DRIVER	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			2.5		0	FLATPACK, LOW PROFILE		2.2 ns			.8 mm	85 Cel		.075 ns	-40 Cel	MATTE TIN	10	QUAD	450 MHz	S-PQFP-G44	3	2.7 V	1.6 mm	10 mm	Not Qualified	2.3 V		e3	30	260	10 mm	5T

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.