LOW SKEW CLOCK DRIVER Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC100EP139DW	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	3.3	-3/-5	SMALL OUTLINE	SOP20,.4	.9 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.1 ns	-40 Cel	Tin/Lead (Sn80Pb20)	4	DUAL	1500 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0	30	235	12.8 mm	100E
MC100EP809FAG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL	3.3	1.8,3.3	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	1 ns		Clock Drivers	.8 mm	85 Cel	OPEN-EMITTER	.05 ns	0 Cel	MATTE TIN	9	QUAD	500 MHz	S-PQFP-G32	2	3.6 V	1.6 mm	7 mm	Not Qualified	3 V			e3	30	260	7 mm	100E
MC100LVE310FNR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL	3.3	-3.3	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0		235	11.505 mm	100LVE
NB3W1200LMNTXG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4.5 ns			.5 mm	70 Cel	3-STATE	.05 ns	0 Cel	MATTE TIN	24	QUAD		S-XQCC-N64	3	3.465 V	1 mm	9 mm		3.135 V			e3	30	260	9 mm	NB3
MC10EP139DTR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	3.3	-3.0/-5.5/3.3/5.0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.9 ns		Clock Drivers	.65 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL		R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4	30	260	6.5 mm	10E
NB4L6254MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		BIPOLAR	2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.485 ns		Clock Drivers	.5 mm	85 Cel	3-STATE	.05 ns	-40 Cel	TIN	6	QUAD	3000 MHz	S-PQCC-N32	1	3.465 V	1 mm	5 mm	Not Qualified	2.375 V			e3	30	260	5 mm	4L
MC100LVEP210MNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		ECL	2.5	+-2.375/+-3.8	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20	.43 ns		Clock Drivers	.5 mm	85 Cel		.025 ns	-40 Cel		5	QUAD		S-PQCC-N32		3.8 V	1 mm	5 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V				5 mm	100LVE
MC100EP139DWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	3.3	-3.0/-5.5/3.3/5.0	SMALL OUTLINE	SOP20,.4	.9 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.1 ns	-40 Cel	MATTE TIN	4	DUAL	1500 MHz	R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	12.8 mm	100E
MC100EP14DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL	3.3	-4.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.45 ns		Clock Drivers	.65 mm	85 Cel		.045 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL		R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4		260	6.5 mm	100E
MC10H644FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6.7 ns		Clock Drivers	1.27 mm	85 Cel		1.5 ns	0 Cel	TIN LEAD	4	QUAD	135 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.965 mm	Not Qualified	4.75 V			e0		235	8.965 mm	10H
MC100H644FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL	5	5	CHIP CARRIER	LDCC20,.4SQ	6.7 ns		Clock Drivers	1.27 mm	85 Cel		1.5 ns	0 Cel	Tin/Lead (Sn80Pb20)	4	QUAD	135 MHz	S-PQCC-J20	1	5.25 V	4.57 mm	8.965 mm	Not Qualified	4.75 V			e0			8.965 mm	100H
MC100EL11DTR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	5	-4.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.34 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN	2	DUAL		S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e3	30	260	3 mm	100EL
NB6L239MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		ECL	2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.57 ns		Clock Drivers	.5 mm	85 Cel		.03 ns	-40 Cel	MATTE TIN	2	QUAD	3000 MHz	S-XQCC-N16	1	3.465 V	1 mm	3 mm	Not Qualified	2.375 V			e3	30	260	3 mm	6L
NB3L204KMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.4 ns			.5 mm	85 Cel	3-STATE	.1 ns	-40 Cel	MATTE TIN	8	QUAD	350 MHz	S-XQCC-N24	1	2.625 V	.9 mm	4 mm		2.375 V		ALSO OPERATES AT 2.97 TO 3.63 V SUPPLY	e3	30	260	4 mm	NB3
MC10H643FNG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1		ECL	5	5,-5.2	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC100H640FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN LEAD	6	QUAD	135 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e0		235	11.505 mm	100H
MC10E221FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL	5		CHIP CARRIER		1.125 ns			1.27 mm	85 Cel		.075 ns	0 Cel	TIN LEAD	6	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e0			11.505 mm	10E
MC100EP139MNTXG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		ECL	3.3	-3.0/-5.5/3.3/5.0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	.9 ns		Clock Drivers	.5 mm	85 Cel		.1 ns	-40 Cel	TIN	4	QUAD		S-XQCC-N20	1	5.5 V	1 mm	4 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	4 mm	100E
NB6L16DR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	2.5		SMALL OUTLINE		.18 ns			1.27 mm	85 Cel		.06 ns	-40 Cel	TIN	1	DUAL		R-PDSO-G8	1	3.465 V	1.75 mm	3.9 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e3	30	260	4.9 mm	6L
MC10LVEP11DT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	2.5	+-2.375/+-3.8	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.31 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	2	DUAL		S-PDSO-G8		3.8 V	1.1 mm	3 mm	Not Qualified	2.375 V		NECL MODE : VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	3 mm	10LVE
MC100EP139MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		ECL	3.3	-3.0/-5.5/3.3/5.0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	.9 ns		Clock Drivers	.5 mm	85 Cel		.1 ns	-40 Cel	TIN	4	QUAD		S-XQCC-N20	1	5.5 V	1 mm	4 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	4 mm	100E
MC10EP11MNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	FLAT	8	HVSSOF	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	3.3	-3.0/-5.5/3.3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH	SOLCC8,.08,20	.3 ns		Clock Drivers	.5 mm	85 Cel		.12 ns	-40 Cel	MATTE TIN	2	DUAL		S-PDSO-F8		5.5 V	1 mm	2 mm	Not Qualified	3 V		NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V	e3			2 mm	10EP
NB6L14SMNTWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5	2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.6 ns		Clock Drivers	.5 mm	85 Cel		.2 ns	-40 Cel	MATTE TIN	4	QUAD		S-XQCC-N16	1	2.625 V	1 mm	3 mm	Not Qualified	2.375 V			e3	30	260	3 mm	6L
MC100EP11MNR4	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		ECL	3.3	-3.0/-5.5/3.3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.27 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	2	DUAL		S-XDSO-N8		5.5 V	1 mm	2 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0			2 mm	100E
MC100EL39DW	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	1000000000 Hz	ECL	5	-4.5	SMALL OUTLINE	SOP20,.4	1.2 ns		Prescaler/Multivibrators	1.27 mm	85 Cel		.05 ns	-40 Cel	Tin/Lead (Sn80Pb20)	4	DUAL	1000 MHz	R-PDSO-G20		5.7 V	2.65 mm	7.5 mm	Not Qualified	4.2 V	61 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0	30	235	12.8 mm	100EL
MC100EP11DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	3.3	-3.0/-5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.3 ns		Clock Drivers	.65 mm	85 Cel		.12 ns	-40 Cel	Tin/Lead (Sn/Pb)	2	DUAL		S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	3 V		NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V	e0	30	235	3 mm	10EP
MC100H641FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1		ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN LEAD	9	QUAD	65 MHz	S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e0		235	11.505 mm	100H
MC100H641FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1		ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100LVEL13DWR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		ECL	3.3	-3.3	SMALL OUTLINE	SOP20,.4	.62 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	-40 Cel	MATTE TIN	3	DUAL		R-PDSO-G20	3	3.8 V	2.65 mm	7.5 mm	Not Qualified	3 V		NECL MODE: 0V VCC WITH VEE = -3V TO -3.8V	e3	30	260	12.8 mm	100LVEL
NB6LQ572MMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.25 ns		Clock Drivers	.5 mm	85 Cel		.015 ns	-40 Cel	TIN	2	QUAD	5000 MHz	S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V	e3	30	260	5 mm	6L
MC10H646FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e0		235	11.505 mm	10H
MC100LVEP210FARG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		ECL	2.5	+-2.375/+-3.8	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.43 ns		Clock Drivers	.8 mm	85 Cel		.025 ns	-40 Cel	MATTE TIN	5	QUAD		S-PQFP-G32	2	3.8 V	1.6 mm	7 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	7 mm	100LVE
NB6L11SMNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5	2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.45 ns		Clock Drivers	.5 mm	85 Cel		.025 ns	-40 Cel	NICKEL GOLD PALLADIUM	2	QUAD		S-XQCC-N16	1	2.625 V	1 mm	3 mm	Not Qualified	2.375 V				30	260	3 mm	6L
MC100LVEP11D	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	2.5	+-2.375/+-3.8	SMALL OUTLINE	SOP8,.25	.31 ns		Clock Drivers	1.27 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	2	DUAL		R-PDSO-G8		3.8 V	1.75 mm	3.9 mm	Not Qualified	2.375 V		NECL MODE : VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	4.9 mm	100LVE
MC100LVEL38DW	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	3.3	-3.3	SMALL OUTLINE	SOP20,.4	1.05 ns	100 Amp	Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	-40 Cel	TIN LEAD	4	DUAL	1000 MHz	R-PDSO-G20	1	3.8 V	2.65 mm	7.5 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0		235	12.8 mm	100LVEL
MC100H644FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL	5	5	CHIP CARRIER	LDCC20,.4SQ	6.7 ns		Clock Drivers	1.27 mm	85 Cel		1.5 ns	0 Cel	TIN LEAD	4	QUAD	135 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.965 mm	Not Qualified	4.75 V			e0			8.965 mm	100H
MC100LVEL38DWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	3.3	-3.3	SMALL OUTLINE	SOP20,.4	1.05 ns	100 Amp	Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	-40 Cel	MATTE TIN	4	DUAL	1000 MHz	R-PDSO-G20	3	3.8 V	2.65 mm	7.5 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	12.8 mm	100LVEL
NB6LQ572MMNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.25 ns		Clock Drivers	.5 mm	85 Cel		.015 ns	-40 Cel	TIN	2	QUAD	5000 MHz	S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V	e3	30	260	5 mm	6L
MC100E210FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		ECL	5	-4.5	CHIP CARRIER	LDCC28,.5SQ	.75 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	0 Cel	TIN LEAD	4	QUAD		S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC100LVE210FNR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		ECL	3.3	-3.3	CHIP CARRIER	LDCC28,.5SQ	.9 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	-40 Cel	TIN LEAD	4	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0		235	11.505 mm	100LVE
MC100H643FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1		ECL	5	-4.5	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
NB4L339MNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	5 ns		Clock Drivers	.5 mm	85 Cel		.19 ns	-40 Cel	TIN	8	QUAD	700 MHz	S-XQCC-N32	1	3.6 V	1 mm	5 mm	Not Qualified	2.375 V			e3	30	260	5 mm	4L
MC100LVEP14DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL	2.5	-4.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.475 ns		Clock Drivers	.65 mm	85 Cel	OPEN-EMITTER	.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL	2000 MHz	R-PDSO-G20		3.8 V	1.2 mm	4.4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4		260	6.5 mm	100LVE
MC10E211FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	1.125 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	0 Cel	TIN LEAD	6	QUAD		S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC100LVE111FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	3.3	+-3/+-3.8	CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28	3	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	11.505 mm	100LVE
MC10EP139DT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	3.3	-3.0/-5.5/3.3/5.0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.9 ns		Clock Drivers	.65 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL		R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4		260	6.5 mm	10E
MC10LVEP11DR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	2.5	+-2.375/+-3.8	SMALL OUTLINE	SOP8,.25	.31 ns		Clock Drivers	1.27 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	2	DUAL		R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified	2.375 V		NECL MODE : VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	4.9 mm	10LVE
MC100LVEP210MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		ECL	2.5	+-2.375/+-3.8	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20	.43 ns		Clock Drivers	.5 mm	85 Cel		.025 ns	-40 Cel	TIN	5	QUAD		S-PQCC-N32	1	3.8 V	1 mm	5 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	5 mm	100LVE

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.