PLL BASED CLOCK DRIVER Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Screening Level	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
CDC2509PWLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.25 ns	0 Cel		9	DUAL	125 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	7.8 mm	CDC
CDC5806PWR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25				.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		R-PDSO-G20	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	6.5 mm	5806
CDC2509BPW	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL	125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2509
SNCDC2536DL	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	BICMOS			3.3		15 pF	0	SMALL OUTLINE, SHRINK PITCH					.635 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.5 mm	Not Qualified	3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; O/P FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F				9.525 mm	ABT
CDC2510CPWR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Driver	.65 mm	85 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL	125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2510
HPA00071ZQLR	Texas Instruments	PLL BASED CLOCK DRIVER		BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	1.8			0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		9 Amp		.65 mm	85 Cel		.035 ns	-40 Cel	TIN SILVER COPPER	10	BOTTOM	400 MHz	R-PBGA-B52	2	1.9 V	1 mm	4.5 mm		1.7 V	235 mA		e1	30	260	7 mm	877
CDCF2510PWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		14 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL	140 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2510
CDC7005RGZT	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.95 ns	6 Amp		.5 mm	85 Cel	3-STATE	.06 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5	QUAD	800 MHz	S-PQCC-N48	3	3.6 V	1 mm	7 mm	Not Qualified	3 V	265 mA	INTEGRATED LOW-NOISE OP AMP	e4	NOT SPECIFIED	260	7 mm	7005
SNCDC2516DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.5 mm	70 Cel	3-STATE	.25 ns	0 Cel		16	DUAL	125 MHz	R-PDSO-G48		3.6 V	1.2 mm	6.1 mm	Not Qualified	3 V						12.5 mm	SNCD
CDCR83DBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3			0	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL	400 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified	3.135 V			e4	30	260	8.65 mm	83
SNCDC516DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.5 mm	70 Cel	3-STATE	.25 ns	0 Cel		16	DUAL	125 MHz	R-PDSO-G48		3.6 V	1.2 mm	6.1 mm	Not Qualified	3 V						12.5 mm	SNCD
CDC509PWLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		20 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.25 ns	0 Cel		9	DUAL	125 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	7.8 mm	CDC
CDC586PAHG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	FLATPACK, THIN PROFILE	TQFP52,.47SQ		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	12	QUAD	100 MHz	S-PQFP-G52	4	3.6 V	1.2 mm	10 mm	Not Qualified	3 V			e4	30	260	10 mm	586
CAB4AZNRR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	253	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	1.2			0	GRID ARRAY, LOW PROFILE, FINE PITCH					.5 mm	95 Cel			-40 Cel	TIN SILVER COPPER	8	BOTTOM	1200 MHz	R-PBGA-B253	3		1.4 mm	8 mm					e1	30	260	13.5 mm	CAB4A
SN74SSQEB32882ZALR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	BALL	176	TFBGA	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1			TR	1.35	1.25/1.5		0	GRID ARRAY	BGA176,11X20,25			Other Logic ICs	.65 mm	85 Cel			0 Cel	TIN SILVER COPPER	0	BOTTOM	945 MHz	S-PBGA-B176	3		1.2 mm	8 mm	Not Qualified				e1	30	260	13.5 mm	S
SNCDC2536DLR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	BICMOS			3.3		15 pF	0	SMALL OUTLINE, SHRINK PITCH					.635 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.5 mm	Not Qualified	3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; O/P FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F				9.525 mm	ABT
SN74SSQE32882ZALR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	BALL	176	TFBGA	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		TR	1.5	1.5		0	GRID ARRAY	BGA176,11X20,25			Other Logic ICs	.65 mm	85 Cel			0 Cel	TIN SILVER COPPER	0	BOTTOM		S-PBGA-B176	3		1.2 mm	8 mm	Not Qualified				e1	30	260	13.5 mm	S
CDC2509PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL	125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2509
CDCR83ADBQG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			1	SMALL OUTLINE, SHRINK PITCH				Clock Driver	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified	3.135 V			e4	30	260	8.65 mm	CDC
CDCF2509PWG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL	140 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2509
CDC2536DB	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3	15 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL	125 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V	2 mA		e4	30	260	10.2 mm	2536
HPA00014DGG	Texas Instruments	PLL BASED CLOCK DRIVER		GULL WING		TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES										SMALL OUTLINE, THIN PROFILE, SHRINK PITCH										NICKEL PALLADIUM GOLD		DUAL		R-PDSO-G48	2								e4	30	260
CDC2509CPWG4	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.2 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	9	DUAL	125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V	.01 mA		e4	NOT SPECIFIED	260	7.8 mm	2509
CDC857-3DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				2.5	2.5,3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	6 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.1 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		R-PDSO-G48	1	2.7 V	1.2 mm	6.1 mm	Not Qualified	2.3 V		ALSO REQUIRES 3.3V PLL VOLTAGE	e4	30	250	12.5 mm
CDC7005RGZTG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.95 ns			.5 mm	85 Cel	3-STATE	.06 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	QUAD	800 MHz	S-PQCC-N48	3	3.6 V	1 mm	7 mm	Not Qualified	3 V		INTEGRATED LOW-NOISE OP AMP	e4	30	260	7 mm	7005
SNCDC587DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.5 mm	70 Cel	3-STATE	.5 ns	0 Cel		12	DUAL	150 MHz	R-PDSO-G56		3.6 V	1.2 mm	6.1 mm	Not Qualified	3 V						14 mm	SNCD
SNCDC586PAH	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	MUX	1	BICMOS			3.3		30 pF	0	FLATPACK, THIN PROFILE					.65 mm	70 Cel	3-STATE	.5 ns	0 Cel		12	QUAD	100 MHz	S-PQFP-G52		3.6 V	1.2 mm	10 mm	Not Qualified	3 V	1 mA					10 mm	ABT
LMK61A2-100M00SIA	Texas Instruments	PLL BASED CLOCK DRIVER
SNCDC536DL	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	BICMOS			3.3		15 pF	0	SMALL OUTLINE, SHRINK PITCH					.635 mm	70 Cel	3-STATE	.5 ns	0 Cel		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.5 mm	Not Qualified	3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; O/P FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F				9.525 mm	ABT
CDC2509CPW	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL	125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V	.01 mA		e4	30	260	7.8 mm	2509
CDC2510APWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel		10	DUAL	100 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	7.8 mm	2510
CDCS503IPWRQ1	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		AEC-Q100		3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	105 Cel			-40 Cel		1	DUAL	108 MHz	R-PDSO-G8		3.6 V	1.2 mm	3 mm		3 V				NOT SPECIFIED	NOT SPECIFIED	4.4 mm	CDC
CDCF5801DBQG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		16 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL	280 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V		DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE	e4	30	260	8.65 mm	5801
CDC5801DBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3			1	SMALL OUTLINE, SHRINK PITCH			16 Amp	Clock Driver	.635 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL	500 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V	70 mA		e4	30	260	8.65 mm	5801
CDC586PAH	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	FLATPACK, THIN PROFILE	TQFP52,.47SQ		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	12	QUAD	100 MHz	S-PQFP-G52	4	3.6 V	1.2 mm	10 mm	Not Qualified	3 V			e4	30	260	10 mm	586
CDC2510APWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel		10	DUAL	100 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	7.8 mm	2510
SN74SSQEC32882ZALR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	BALL	176	TFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS		TR	1.35	1.25/1.5		0	GRID ARRAY, THIN PROFILE, FINE PITCH	BGA176,11X20,25			Other Logic ICs	.65 mm	85 Cel	OPEN-DRAIN		0 Cel	TIN SILVER COPPER	4	BOTTOM	945 MHz	R-PBGA-B176	3		1.2 mm	8 mm	Not Qualified				e1	30	250	13.5 mm	SSQE
CDC2536DBR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	15 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL	125 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V	2 mA		e4	30	260	10.2 mm	2536
CDCS503TPWRQ1	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		AEC-Q100	TR	3.3		15 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			12 Amp		.65 mm	105 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL	108 MHz	R-PDSO-G8	3	3.6 V	1.2 mm	3 mm		3 V			e4	30	260	4.4 mm	CDC
CDC5801ADBQG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			1	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL	500 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e4	30	260	8.65 mm	CDC
SNCDC2586PBG	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	MUX	1	BICMOS			3.3		15 pF	0	FLATPACK, LOW PROFILE					.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		12	QUAD	100 MHz	S-PQFP-G52		3.6 V	1.6 mm	10 mm	Not Qualified	3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; OUTPUT FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F; RMS JITTER = 25PS				10 mm	ABT
CDC536DBG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL	100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V			e4	30	260	10.2 mm	536
CDC587DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		20 Amp	Clock Drivers	.5 mm	70 Cel	3-STATE	.5 ns	0 Cel		16	DUAL	150 MHz	R-PDSO-G56		3.6 V	1.2 mm	6.1 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	14 mm	CDC
CDC2509BPWG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL	125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2509
SNCDC2587DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.5 mm	70 Cel	3-STATE	.5 ns	0 Cel		16	DUAL	150 MHz	R-PDSO-G56		3.6 V	1.2 mm	6.1 mm	Not Qualified	3 V						14 mm	SNCD
CDCF5801ADBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		TUBE	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		40 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL	280 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V		DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE	e4	30	260	8.65 mm	5801
CDC2509BPWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL	125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2509
HPA00013PWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	2				3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel		.2 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL		R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm		3 V			e4	NOT SPECIFIED	260	7.8 mm	CDCF

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.