4 Clock Drivers & Buffers 3

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
AD246JY	Analog Devices	LOW SKEW CLOCK DRIVER	OTHER	THROUGH-HOLE	4	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	HYBRID	15	15	VERTICAL IN-LINE	ZIP4/13,.1,.1	Clock Drivers	1.27 mm	85 Cel	-25 Cel		1	DUAL		R-PDXA-T4			15.9 mm	2.5 mm	Not Qualified	14.25 V			NOT SPECIFIED	NOT SPECIFIED		AD24
P3MS650103H-4CR	Onsemi	PLL BASED CLOCK DRIVER	OTHER	NO LEAD	4	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		1.8		SMALL OUTLINE, VERY THIN PROFILE			.5 mm	85 Cel	-20 Cel	NICKEL PALLADIUM GOLD	1	DUAL	30 MHz	R-PDSO-N4	1	2 V	.8 mm	1 mm		1.6 V	ALSO OPERATES FROM 2.3 TO 3.6V SUPPLY	e4	30	260	1.2 mm	3M
P3MS650100H-4CR	Onsemi	PLL BASED CLOCK DRIVER	OTHER	NO LEAD	4	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		1.8		SMALL OUTLINE, VERY THIN PROFILE			.5 mm	85 Cel	-20 Cel	NICKEL PALLADIUM GOLD	1	DUAL	30 MHz	R-PDSO-N4	1	2 V	.8 mm	1 mm		1.6 V	ALSO OPERATES FROM 2.3 TO 3.6V SUPPLY	e4	30	260	1.2 mm	3M

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.