52 Clock Drivers & Buffers 194

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
CDCUA877ZQLR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS	TR	1.8	1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		9 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.035 ns	-40 Cel	TIN SILVER COPPER	10	BOTTOM	410 MHz	R-PBGA-B52	2	1.9 V	1 mm	4.5 mm	Not Qualified	1.7 V			e1	30	260	7 mm	877
CDCU2A877ZQLR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	1.8	1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		18 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.035 ns	0 Cel	TIN SILVER COPPER	10	BOTTOM	410 MHz	R-PBGA-B52	2	1.9 V	1 mm	4.5 mm	Not Qualified	1.7 V			e1	30	260	7 mm	877
CDCU877AGQLT	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS		1.8	1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		9 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.035 ns	-40 Cel	TIN LEAD	10	BOTTOM	340 MHz	R-PBGA-B52	2	1.9 V	1 mm	4.5 mm	Not Qualified	1.7 V			e0	20	235	7 mm	877
CDCU877AGQLR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS		1.8	1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		9 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.035 ns	-40 Cel		10	BOTTOM	340 MHz	R-PBGA-B52		1.9 V	1 mm	4.5 mm	Not Qualified	1.7 V				NOT SPECIFIED	NOT SPECIFIED	7 mm	877
CDCUA877ZQL	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS		1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH					.65 mm	85 Cel	3-STATE	.035 ns	-40 Cel	TIN SILVER COPPER	10	BOTTOM	410 MHz	R-PBGA-B52		1.9 V	1 mm	4.5 mm	Not Qualified	1.7 V			e1			7 mm	877
CDCU2A877NMKT	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		18 Amp		.65 mm	70 Cel		.035 ns	0 Cel	TIN SILVER COPPER	10	BOTTOM	410 MHz	R-PBGA-B52	3	1.9 V	1 mm	4.5 mm		1.7 V	325 mA		e1	30	260	7 mm
CDCU877AGQL	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			1.8	1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		9 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.035 ns	-40 Cel		10	BOTTOM	340 MHz	R-PBGA-B52		1.9 V	1 mm	4.5 mm	Not Qualified	1.7 V						7 mm	877
CDCU877ANMKT	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		9 Amp		.65 mm	85 Cel		.035 ns	-40 Cel	TIN SILVER COPPER	10	BOTTOM	340 MHz	R-PBGA-B52	3	1.9 V	1 mm	4.5 mm		1.7 V	235 mA		e1	30	260	7 mm
CDCU877BZQLT	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS	TR	1.8	1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		9 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.025 ns	-40 Cel	TIN SILVER COPPER	10	BOTTOM	340 MHz	R-PBGA-B52	2	1.9 V	1 mm	4.5 mm	Not Qualified	1.7 V			e1	30	260	7 mm	877
CDCU877ZQLR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS	TR	1.8	1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		9 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.035 ns	-40 Cel	TIN SILVER COPPER	10	BOTTOM	340 MHz	R-PBGA-B52	2	1.9 V	1 mm	4.5 mm	Not Qualified	1.7 V			e1	30	260	7 mm	877
CDCU877ZQL	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			1.8	1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		9 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.035 ns	-40 Cel		10	BOTTOM	340 MHz	R-PBGA-B52		1.9 V	1 mm	4.5 mm	Not Qualified	1.7 V						7 mm	877
CDCU2A877ZQLT	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	1.8	1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		18 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.035 ns	0 Cel	TIN SILVER COPPER	10	BOTTOM	410 MHz	R-PBGA-B52	2	1.9 V	1 mm	4.5 mm	Not Qualified	1.7 V			e1	30	260	7 mm	877
CDCU877AZQL	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			1.8	1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		9 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.035 ns	-40 Cel		10	BOTTOM	340 MHz	R-PBGA-B52		1.9 V	1 mm	4.5 mm	Not Qualified	1.7 V						7 mm	877
CDCU877ANMKR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		9 Amp		.65 mm	85 Cel		.035 ns	-40 Cel	TIN SILVER COPPER	10	BOTTOM	340 MHz	R-PBGA-B52	3	1.9 V	1 mm	4.5 mm		1.7 V	235 mA		e1	30	260	7 mm
CDCU2A877NMKR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		18 Amp		.65 mm	70 Cel		.035 ns	0 Cel	TIN SILVER COPPER	10	BOTTOM	410 MHz	R-PBGA-B52	3	1.9 V	1 mm	4.5 mm		1.7 V	325 mA		e1	30	260	7 mm
NB100LVEP222FAG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	1 ns		Clock Drivers	.65 mm	85 Cel		.06 ns	-40 Cel	TIN	4	QUAD		S-PQFP-G52	3	3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3		260	10 mm	100LVE
NB100LVEP221FARG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	.71 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	TIN	20	QUAD		S-PQFP-G52	3	3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3		260	10 mm	100LVE
NB100LVEP221FAG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	.71 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	TIN	20	QUAD		S-PQFP-G52	3	3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3		260	10 mm	100LVE
NB7L111MMN	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC52,.31SQ,20	.28 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	10	QUAD		S-XQCC-N52		2.625 V	1 mm	8 mm	Not Qualified	2.375 V		ALSO OPERATES WITH 3.3V SUPPLY	e0		235	8 mm	7L
NB100LVEP221MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC52,.31SQ,20	.71 ns		Clock Drivers	.5 mm	85 Cel		.05 ns	-40 Cel	TIN	20	QUAD		S-XQCC-N52	2	3.8 V	1 mm	8 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	8 mm	100LVE
NB100LVEP222MNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC52,.31SQ,20	1 ns		Clock Drivers	.5 mm	85 Cel		.06 ns	-40 Cel		4	QUAD		S-XQCC-N52		3.8 V	1 mm	8 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V				8 mm	100LVE
NB100LVEP221FAR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	.71 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	20	QUAD		S-PQFP-G52		3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	10 mm	100LVE
NB7L111MMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC52,.31SQ,20	.28 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	MATTE TIN	10	QUAD		S-XQCC-N52	1	2.625 V	1 mm	8 mm	Not Qualified	2.375 V		ALSO OPERATES WITH 3.3V SUPPLY	e3	30	260	8 mm	7L
NB100LVEP221MNRG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	ECL		2.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.71 ns			.5 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	40	QUAD		S-XQCC-N52	2	3.8 V	1 mm	8 mm		2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	8 mm	100LVE
NB100LVEP221MNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC52,.31SQ,20	.71 ns		Clock Drivers	.5 mm	85 Cel		.05 ns	-40 Cel		20	QUAD		S-XQCC-N52		3.8 V	1 mm	8 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V				8 mm	100LVE
NB100LVEP222FARG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	1 ns		Clock Drivers	.65 mm	85 Cel		.06 ns	-40 Cel	TIN	4	QUAD		S-PQFP-G52	3	3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3		260	10 mm	100LVE
NB100LVEP222FAR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5		FLATPACK, HEAT SINK/SLUG, LOW PROFILE		1 ns			.65 mm	85 Cel		.06 ns	-40 Cel		4	QUAD		S-PQFP-G52		3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V		NOT SPECIFIED	NOT SPECIFIED	10 mm	100LVE
NB100LVEP222MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	ECL	TRAY	2.5	-2.5/-3.3/2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC52,.31SQ,20	1 ns		Clock Drivers	.5 mm	85 Cel		.06 ns	-40 Cel	MATTE TIN	4	QUAD		S-XQCC-N52	2	3.8 V	1 mm	8 mm	Not Qualified	2.375 V	168 mA	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	8 mm	100LVE
NB100LVEP222FA	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	1 ns		Clock Drivers	.65 mm	85 Cel		.06 ns	-40 Cel	TIN LEAD	4	QUAD		S-PQFP-G52		3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	10 mm	100LVE
NB3N121KMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			3.3	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC52,.31SQ,20	.95 ns		Clock Drivers	.5 mm	85 Cel		.15 ns	-40 Cel	TIN	42	QUAD		S-XQCC-N52	1	3.6 V	1 mm	8 mm	Not Qualified	3 V			e3	30	260	8 mm	3N
NB100LVEP222FAR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	1 ns		Clock Drivers	.65 mm	85 Cel		.06 ns	-40 Cel	TIN LEAD	4	QUAD		S-PQFP-G52		3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	10 mm	100LVE
NB7L111MMNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC52,.31SQ,20	.28 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	TIN	10	QUAD		S-XQCC-N52	1	2.625 V	1 mm	8 mm	Not Qualified	2.375 V		ALSO OPERATES WITH 3.3V SUPPLY	e3	30	260	8 mm	7L
NB100LVEP221FA	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	.71 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	20	QUAD		S-PQFP-G52		3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	10 mm	100LVE
NB7L1MMNR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC52,.31SQ,20	.28 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	10	QUAD		S-XQCC-N52		2.625 V	1 mm	8 mm	Not Qualified	2.375 V		ALSO OPERATES WITH 3.3V SUPPLY	e0			8 mm	7L
NB100LVEP222MNRG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	ECL		2.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1 ns			.5 mm	85 Cel		.06 ns	-40 Cel	TIN	8	QUAD		S-XQCC-N52	2	3.8 V	1 mm	8 mm		2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	8 mm	100LVE
NB3N121KMNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			3.3	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC52,.31SQ,20	.95 ns		Clock Drivers	.5 mm	85 Cel		.15 ns	-40 Cel	TIN	42	QUAD		S-XQCC-N52	1	3.6 V	1 mm	8 mm	Not Qualified	3 V			e3	30	260	8 mm	3N
NB7L111MMNR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC52,.31SQ,20	.28 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	10	QUAD		S-XQCC-N52	2	2.625 V	1 mm	8 mm	Not Qualified	2.375 V		ALSO OPERATES WITH 3.3V SUPPLY	e0		235	8 mm	7L
NB100LVEP221FAR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	.71 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel		20	QUAD		S-PQFP-G52	2	3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V				10 mm	100LVE
NB4L7210MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	VQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5	2.5/3.3	CHIP CARRIER, VERY THIN PROFILE	LCC52,.31SQ,20	20 ns	1 Amp	Clock Drivers	.5 mm	85 Cel		.2 ns	-40 Cel	TIN	10	QUAD		S-XQCC-N52	2	3.6 V	1 mm	8 mm	Not Qualified	2.375 V			e3	30	260	8 mm	4L
NB4L7210MNTXG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	VQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5	2.5/3.3	CHIP CARRIER, VERY THIN PROFILE	LCC52,.31SQ,20	20 ns	1 Amp	Clock Drivers	.5 mm	85 Cel		.2 ns	-40 Cel	TIN	10	QUAD		S-XQCC-N52	2	3.6 V	1 mm	8 mm	Not Qualified	2.375 V			e3	30	260	8 mm	4L
MC100LVE222FAR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	-3.3/-5	FLATPACK, LOW PROFILE	QFP52,.47SQ	1.33 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	15	QUAD	1500 MHz	S-PQFP-G52		3.8 V	1.7 mm	10 mm	Not Qualified	3 V		NECL MODE: VCC=0V WITH VEE = -3V TO -3.8V	e0		235	10 mm	100LVE
MC100LVE222FA	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	-3.3/-5	FLATPACK, LOW PROFILE	QFP52,.47SQ	1.33 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	Tin/Lead (Sn80Pb20)	15	QUAD	1500 MHz	S-PQFP-G52		3.8 V	1.7 mm	10 mm	Not Qualified	3 V		NECL MODE: VCC=0V WITH VEE = -3V TO -3.8V	e0	30	235	10 mm	100LVE
MC100LVE222FAG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	-3.3/-5	FLATPACK, LOW PROFILE	QFP52,.47SQ	1.33 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	TIN	15	QUAD	1500 MHz	S-PQFP-G52	2	3.8 V	1.7 mm	10 mm	Not Qualified	3 V		NECL MODE: VCC=0V WITH VEE = -3V TO -3.8V	e3		260	10 mm	100LVE
MC100LVE222FAR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	-3.3/-5	FLATPACK, LOW PROFILE	QFP52,.47SQ	1.33 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	TIN	15	QUAD	1500 MHz	S-PQFP-G52	2	3.8 V	1.7 mm	10 mm	Not Qualified	3 V		NECL MODE: VCC=0V WITH VEE = -3V TO -3.8V	e3		260	10 mm	100LVE
CY7B9973V-AXCT	Infineon Technologies	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	MUX	1			3.3	3.3	FLATPACK, LOW PROFILE	QFP52,.47SQ	.35 ns	20 Amp	Clock Drivers	.65 mm	70 Cel		.35 ns	0 Cel	Matte Tin (Sn)	12	QUAD		S-PQFP-G52	3	3.63 V	1.6 mm	10 mm	Not Qualified	2.97 V		TWO INVERTED OUTPUT (QC2 AND QC3) POSSIBLE ON SELECTION	e3	30	260	10 mm	7B
CY7B9973V-AXC	Infineon Technologies	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	MUX	1			3.3	3.3	FLATPACK, LOW PROFILE	QFP52,.47SQ	.35 ns	20 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.35 ns	0 Cel	Matte Tin (Sn)	12	QUAD	200 MHz	S-PQFP-G52	3	3.63 V	1.6 mm	10 mm	Not Qualified	2.97 V		TWO INVERTED OUTPUT (QC2 AND QC3) POSSIBLE ON SELECTION	e3	30	260	10 mm	7B
MAX9322ECY+D	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR		3.3	+-2.375/+-3.8	FLATPACK, THIN PROFILE	TQFP52,.47SQ,25	1.175 ns		Clock Drivers	.65 mm	85 Cel		.056 ns	-40 Cel	TIN	15	QUAD	93 MHz	S-PQFP-G52	3	3.8 V	1.2 mm	10 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e3			10 mm	9322
MAX9322ECY+TD	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR		3.3	+-2.375/+-3.8	FLATPACK, THIN PROFILE	TQFP52,.47SQ,25	1.175 ns		Clock Drivers	.65 mm	85 Cel		.056 ns	-40 Cel	TIN	15	QUAD	93 MHz	S-PQFP-G52	3	3.8 V	1.2 mm	10 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e3			10 mm	9322

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.