8 Clock Drivers & Buffers 1,513

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
ICS853011AMLFT	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3		SMALL OUTLINE					1.27 mm	85 Cel		.02 ns	-40 Cel	MATTE TIN	2	DUAL		R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified	2.375 V		ECL MODE; VCC=0 WITH VEE=-2.375V TO -3.8V	e3			4.9 mm
570BI	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		3.3	3.3	SMALL OUTLINE	SOP8,.25		12 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.175 ns	-40 Cel	TIN LEAD	2	DUAL	170 MHz	R-PDSO-G8	1	3.45 V	1.75 mm	3.9 mm	Not Qualified	3.15 V			e0	20	240	4.9 mm	570
570BILF	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS	TUBE	3.3	3.3	SMALL OUTLINE	SOP8,.25		12 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.175 ns	-40 Cel	MATTE TIN	2	DUAL	170 MHz	R-PDSO-G8	1	3.45 V	1.75 mm	3.9 mm	Not Qualified	3.15 V			e3	30	260	4.9 mm	570
23S05E-1DCGI	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TUBE	3.3	3.3	SMALL OUTLINE	SOP8,.25	.35 ns	8 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.25 ns	-40 Cel	MATTE TIN	4	DUAL	200 MHz	R-PDSO-G8	1	3.6 V			Not Qualified	3 V			e3	30	260		23S
23S05T-1DC	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			2.5	2.5	SMALL OUTLINE	SOP8,.25		8 Amp	Clock Drivers	1.27 mm	70 Cel		.25 ns	0 Cel	TIN LEAD	4	DUAL	133 MHz	R-PDSO-G8	1	2.7 V			Not Qualified	2.3 V			e0	20	240		23S
IDT74FCT38075DCGI	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		3.3	3.3	SMALL OUTLINE	SOP8,.25	3 ns	12 Amp	Clock Drivers	1.27 mm	85 Cel		.1 ns	-40 Cel	Matte Tin (Sn) - annealed	5	DUAL		R-PDSO-G8	1	3.6 V	1.7272 mm	3.937 mm	Not Qualified	3 V			e3	30	260	4.9276 mm	FCT
83021AMI-09LFT	Renesas Electronics	LOW SKEW CLOCK DRIVER		GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TR	2.5		SMALL OUTLINE	SOP8,.25	2.5 ns			1.27 mm	85 Cel		.5 ns	-40 Cel		1	DUAL		R-PDSO-G8		2.625 V	1.75 mm	3.9 mm		2.375 V	20 mA					4.9 mm	83021
83021AMI-09LF	Renesas Electronics	LOW SKEW CLOCK DRIVER		GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TUBE	2.5		SMALL OUTLINE	SOP8,.25	2.5 ns			1.27 mm	85 Cel		.5 ns	-40 Cel		1	DUAL		R-PDSO-G8		2.625 V	1.75 mm	3.9 mm		2.375 V	20 mA					4.9 mm	83021
5V50015PGG8	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		3.3		SMALL OUTLINE					.65 mm	70 Cel			0 Cel	Matte Tin (Sn) - annealed	0	DUAL	200 MHz	R-PDSO-G8	1	3.6 V	1.2 mm	3 mm	Not Qualified	3 V			e3	30	260	4.4 mm	5V
5V50015PGG	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		3.3		SMALL OUTLINE					.65 mm	70 Cel			0 Cel	Matte Tin (Sn) - annealed	0	DUAL	200 MHz	R-PDSO-G8	1	3.6 V	1.2 mm	3 mm	Not Qualified	3 V			e3	30	260	4.4 mm	5V
5V50013PGG	Renesas Electronics	CLOCK DRIVER	COMMERCIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel			0 Cel	Matte Tin (Sn) - annealed	1	DUAL	140 MHz	R-PDSO-G8	1	3.63 V	1.2 mm	3 mm	Not Qualified	2.97 V			e3	30	260	4.4 mm	5V
5V50015DCG8	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		3.3		SMALL OUTLINE					1.27 mm	70 Cel			0 Cel	MATTE TIN	0	DUAL	200 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e3	30	260	4.9 mm	5V
5V50013PGG8	Renesas Electronics	CLOCK DRIVER	COMMERCIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel			0 Cel	Matte Tin (Sn) - annealed	1	DUAL	140 MHz	R-PDSO-G8	1	3.63 V	1.2 mm	3 mm	Not Qualified	2.97 V			e3	30	260	4.4 mm	5V
5V50015DCG	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		3.3		SMALL OUTLINE					1.27 mm	70 Cel			0 Cel	MATTE TIN	0	DUAL	200 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e3	30	260	4.9 mm	5V
5T30553DCG8	Renesas Electronics	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS	TR	2.5	2.5/3.3	SMALL OUTLINE	SOP8,.25	5 ns	25 Amp	Clock Drivers	1.27 mm	70 Cel		.5 ns	0 Cel	MATTE TIN	4	DUAL		R-PDSO-G8	1	3.45 V	1.75 mm	3.9 mm	Not Qualified	2.375 V		IT CAN ALSO OPERATE AT 3.3V SUPPLY	e3	30	260	4.9 mm	5T
5T30553DCG	Renesas Electronics	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS	TUBE	2.5	2.5/3.3	SMALL OUTLINE	SOP8,.25	5 ns	25 Amp	Clock Drivers	1.27 mm	70 Cel		.5 ns	0 Cel	MATTE TIN	4	DUAL		R-PDSO-G8	1	3.45 V	1.75 mm	3.9 mm	Not Qualified	2.375 V		IT CAN ALSO OPERATE AT 3.3V SUPPLY	e3	30	260	4.9 mm	5T
5T30553DCGI	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS	TUBE	2.5	2.5/3.3	SMALL OUTLINE	SOP8,.25	5 ns	25 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	-40 Cel	MATTE TIN	4	DUAL		R-PDSO-G8	1	3.45 V	1.75 mm	3.9 mm	Not Qualified	2.375 V		IT CAN ALSO OPERATE AT 3.3V SUPPLY	e3	30	260	4.9 mm	5T
SY10EP11UZI	Micron Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5		SMALL OUTLINE		.31 ns			1.27 mm	85 Cel		.02 ns	-40 Cel		2	DUAL	3000 MHz	R-PDSO-G8		5.5 V	1.73 mm	3.94 mm	Not Qualified	2.375 V		ECL/LVECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -5.5 V				4.93 mm	10E
SY100EP11UKI	Micron Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.31 ns			.65 mm	85 Cel		.02 ns	-40 Cel		2	DUAL	3000 MHz	S-PDSO-G8		5.5 V	1.1 mm	3 mm	Not Qualified	2.375 V		ECL/LVECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -5.5 V				3 mm	100E
SY10EP11UKI	Micron Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.31 ns			.65 mm	85 Cel		.02 ns	-40 Cel		2	DUAL	3000 MHz	S-PDSO-G8		5.5 V	1.1 mm	3 mm	Not Qualified	2.375 V		ECL/LVECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -5.5 V				3 mm	10E
SY10EP11UZITR	Micron Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5		SMALL OUTLINE		.31 ns			1.27 mm	85 Cel		.02 ns	-40 Cel		2	DUAL	3000 MHz	R-PDSO-G8		5.5 V	1.73 mm	3.94 mm	Not Qualified	2.375 V		ECL/LVECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -5.5 V				4.93 mm	10E
SY100EP11UZI	Micron Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5		SMALL OUTLINE		.31 ns			1.27 mm	85 Cel		.02 ns	-40 Cel		2	DUAL	3000 MHz	R-PDSO-G8		5.5 V	1.73 mm	3.94 mm	Not Qualified	2.375 V		ECL/LVECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -5.5 V				4.93 mm	100E
SY10EP11UKITR	Micron Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.31 ns			.65 mm	85 Cel		.02 ns	-40 Cel		2	DUAL	3000 MHz	S-PDSO-G8		5.5 V	1.1 mm	3 mm	Not Qualified	2.375 V		ECL/LVECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -5.5 V				3 mm	10E
SY100EP11UKITR	Micron Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.31 ns			.65 mm	85 Cel		.02 ns	-40 Cel		2	DUAL	3000 MHz	S-PDSO-G8		5.5 V	1.1 mm	3 mm	Not Qualified	2.375 V		ECL/LVECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -5.5 V				3 mm	100E
SY100EP11UZITR	Micron Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5		SMALL OUTLINE		.31 ns			1.27 mm	85 Cel		.02 ns	-40 Cel		2	DUAL	3000 MHz	R-PDSO-G8		5.5 V	1.73 mm	3.94 mm	Not Qualified	2.375 V		ECL/LVECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -5.5 V				4.93 mm	100E

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.