HQCCN Clock Drivers & Buffers 55

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Screening Level	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
853S9252BKILF/W	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				3.3		CHIP CARRIER, HEAT SINK/SLUG		.2 ns			.5 mm	85 Cel		.017 ns	-40 Cel		4	QUAD	S-XQCC-N16		3.63 V	1.05 mm	3 mm		2.375 V			NOT SPECIFIED	NOT SPECIFIED	3 mm	853S
8SLVP1204ANLGI/W	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG	LCC16,.12SQ,20	.325 ns		Clock Drivers	.5 mm	85 Cel		.03 ns	-40 Cel	MATTE TIN	8	QUAD	S-XQCC-N16	3	2.625 V	1.05 mm	3 mm	Not Qualified	2.375 V	ALSO OPERATES AT 2.97 TO 3.63 V AND 3.135 TO 3.465 V SUPPLY	e3		260	3 mm	8SLVP
8SLVD1204NLGI8	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	CMOS			2.5		CHIP CARRIER, HEAT SINK/SLUG		.3 ns			.5 mm	85 Cel		.02 ns	-40 Cel	MATTE TIN	8	QUAD	S-XQCC-N16	3	2.625 V	1.05 mm	3 mm		2.375 V	SEATED HT CALCULATED	e3		260	3 mm	8SLVD
8SLVD1204NLGI/W	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	CMOS		TR	2.5		CHIP CARRIER, HEAT SINK/SLUG		.3 ns			.5 mm	85 Cel		.02 ns	-40 Cel	MATTE TIN	8	QUAD	S-XQCC-N16	3	2.625 V	1.05 mm	3 mm		2.375 V	SEATED HT CALCULATED	e3		260	3 mm	8SLVD
8SLVP2102ANLGI	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	2				2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG	LCC16,.12SQ,20	.225 ns		Clock Drivers	.5 mm	85 Cel		.015 ns	-40 Cel	MATTE TIN	4	QUAD	S-XQCC-N16	3	2.625 V	1.05 mm	3 mm	Not Qualified	2.375 V	ALSO OPERATES AT 3.3 V SUPPLY	e3		260	3 mm	8SLVP
8SLVS1118NLGI	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				2.5		CHIP CARRIER, HEAT SINK/SLUG		.4 ns				85 Cel		.06 ns	-40 Cel	MATTE TIN	36	QUAD	S-XQCC-N48	3	2.625 V				2.375 V	IT ALSO OPERATES AT 3.3V	e3		260		8SLVS
49FCT805CTLB	Renesas Electronics	LOW SKEW CLOCK DRIVER	MILITARY	NO LEAD	20	HQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	SCHMITT TRIGGER	2	CMOS	MIL-STD-883 Class B		5	5	CHIP CARRIER, HEAT SINK/SLUG	LCC20,.35SQ	5.2 ns	32 Amp	Clock Drivers	1.27 mm	125 Cel	3-STATE	.7 ns	-55 Cel	TIN LEAD	5	QUAD	S-CQCC-N20	1	5.5 V			Not Qualified	4.5 V		e0		240		FCT

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.