SOP Clock Drivers & Buffers 2,032

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
CY2305SXI-1	Infineon Technologies	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3	3.3		0	SMALL OUTLINE	SOP8,.25	8.7 ns	8 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.25 ns	-40 Cel	MATTE TIN	8	DUAL		133.33 MHz	R-PDSO-G8	3	3.6 V	1.727 mm	3.8985 mm	Not Qualified		3 V			e3	20	260	4.889 mm	2305
CY2308SXI-1	Infineon Technologies	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3	3.3		0	SMALL OUTLINE	SOP16,.25		8 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.2 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		133.3 MHz	R-PDSO-G16	3	3.6 V	1.727 mm	3.8985 mm	Not Qualified		3 V			e4	40	260	9.893 mm	2308
CY23EP05SXC-1H	Infineon Technologies	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				2.5	2.5/3.3		0	SMALL OUTLINE	SOP8,.25	.2 ns	12 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE	.1 ns	0 Cel	MATTE TIN	4	DUAL		220 MHz	R-PDSO-G8	3	2.7 V	1.727 mm	3.9 mm	Not Qualified		2.3 V		ALSO OPERATES AT 3.3V SUPPLY	e3	20	260	4.889 mm	23EP
MC88913D	Motorola	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			5	5	50 pF	2	SMALL OUTLINE	SOP14,.25		24 Amp	Clock Drivers	1.27 mm	85 Cel		1.5 ns	-40 Cel	TIN LEAD	4	DUAL		110 MHz	R-PDSO-G14		6 V	1.75 mm	3.9 mm	Not Qualified		2 V		MAX PART TO PART SKEW = 5.5NS	e0			8.65 mm	88913
CY2304SXI-2	Infineon Technologies	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3	3.3	15 pF	0	SMALL OUTLINE	SOP8,.25		8 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.2 ns	-40 Cel	MATTE TIN	4	DUAL		133.3 MHz	R-PDSO-G8	3	3.6 V	1.727 mm	3.8985 mm	Not Qualified		3 V	45 mA		e3	20	260	4.889 mm	2304
CY2305ESXI-1	Cypress Semiconductor	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3			0	SMALL OUTLINE		8.7 ns			1.27 mm	85 Cel	3-STATE	.25 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL		133.33 MHz	R-PDSO-G8	3	3.6 V	1.727 mm	3.8989 mm	Not Qualified		3 V			e4			4.889 mm	2305
CY2305SXI-1T	Infineon Technologies	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3	3.3		0	SMALL OUTLINE	SOP8,.25	8.7 ns	8 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.25 ns	-40 Cel	MATTE TIN	8	DUAL		133.33 MHz	R-PDSO-G8	3	3.6 V	1.727 mm	3.8985 mm	Not Qualified		3 V			e3	20	260	4.889 mm	2305
MC88LV926DW	Motorola	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3	3.3		1	SMALL OUTLINE	SOP20,.4			Clock Drivers	1.27 mm	70 Cel	3-STATE	1 ns	0 Cel	Tin/Lead (Sn/Pb)	4	DUAL		66 MHz	R-PDSO-G20		3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V		OUTPUT FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F; MEETS 68030, 68040 & 68060 SKEW REQUIREMENTS	e0			12.8 mm	LVCMOS/LVTTL
PI49FCT3805DS	Pericom Semiconductor	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SCHMITT TRIGGER	2	CMOS			3.3	3.3		0	SMALL OUTLINE	SSOP20,.25	3 ns	12 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.27 ns	-40 Cel	TIN LEAD	5	DUAL			R-PDSO-G20		3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V			e0			12.8 mm	FCT
PI49FCT811TS	Pericom Semiconductor	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SCHMITT TRIGGER	1	CMOS			5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	7 ns	64 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE	.5 ns	0 Cel	TIN LEAD	10	DUAL			R-PDSO-G24	1	5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V		MULTIPLE SELECTABLE PHASE/FREQUENCY RELATIONS FOR THE CLOCK O/P	e0			15.4 mm	FCT
PI6CL10804WEX	Diodes Incorporated	CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				1.2	1.2/1.5		0	SMALL OUTLINE	SOP8,.25	3.5 ns	8 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.1 ns	-40 Cel	MATTE TIN	4	DUAL		200 MHz	R-PDSO-G8	1	1.3 V	1.75 mm	3.885 mm	Not Qualified		1.1 V		ALSO OPERATES AT 1.5V SUPPLY	e3			4.9 mm	6C
PL133-47SI	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	2.5			0	SMALL OUTLINE		9.2 ns			1.27 mm	85 Cel		.25 ns	-40 Cel	MATTE TIN	4	DUAL			R-PDSO-G8		3.63 V	1.75 mm	3.9 mm			2.25 V			e3			4.9 mm	PL133
SNCDC337DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE		9 ns			1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	85 mA	4 OUTPUTS ARE BUFFERED & THE OTHER 4 ARE DIVIDED BY TWO				12.8 mm	ABT
SNCDC209DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			5		50 pF	0	SMALL OUTLINE		10.1 ns			1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		3 V		CAN BE OPERATED FROM 3.3V SUPPLY ALSO; WITH DUAL OUTPUT ENABLE; CENTER PIN VCC AND GND				12.8 mm	AC
CDC340DWG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP20,.4	4.8 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns	0 Cel	NICKEL PALLADIUM GOLD	8	DUAL			R-PDSO-G20	1	5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V			e4	30	260	12.825 mm	340
SNCDC209-7DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			5		50 pF	0	SMALL OUTLINE		10.1 ns			1.27 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		3 V		CAN BE OPERATED FROM 3.3V SUPPLY ALSO; WITH DUAL OUTPUT ENABLE; CENTER PIN VCC AND GND				12.8 mm	AC
CDC329ADRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP16,.25	5.9 ns		Clock Drivers	1.27 mm	85 Cel		1.5 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		80 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V		POLARITY CONTROL SELECTS TRUE OR COMPLEMENTARY OUTPUTS	e4	30	260	9.9 mm	329
CDC330DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP24,.4	11 ns	32 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE	.5 ns	0 Cel		10	DUAL		100 MHz	R-PDSO-G24		5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	15.365 mm	330
CDC340DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP20,.4	4.8 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns	0 Cel		8	DUAL		40 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	12.825 mm	340
SN65EPT21D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		TUBE	3.3		20 pF	0	SMALL OUTLINE		1.9 ns	24 Amp		1.27 mm	85 Cel		.25 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		300 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	4.9 mm	65EP
SNCDC304DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5		50 pF	0	SMALL OUTLINE					1.27 mm	70 Cel		1 ns	0 Cel		8	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V	75 mA	CENTER PIN VCC AND GND				9.9 mm	AS
SNCDC208-7DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			5		50 pF	0	SMALL OUTLINE		11.5 ns			1.27 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				12.8 mm	ACT
SNCDC391D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
CDC303D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5	5		2	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		2 ns	0 Cel		6	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	303
SNCDC305DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5		50 pF	4	SMALL OUTLINE					1.27 mm	70 Cel		1.5 ns	0 Cel		4	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V	70 mA	CENTER PIN VCC AND GND				9.9 mm	AS
SN74AS304D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5	5	50 pF	0	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1 ns	0 Cel		8	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V	75 mA			NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
CDC208DWG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	4		5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e4	30	260	12.8 mm	208
SNCDC392D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel	3-STATE	2.2 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
SN74AS303DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5		50 pF	2	SMALL OUTLINE		9 ns			1.27 mm	70 Cel		2 ns	0 Cel		6	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V	70 mA					9.9 mm	AS
CDC351DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.2 ns	32 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	25 mA		e4	30	260	15.4 mm	351
SNCDC328DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE		5.4 ns			1.27 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	30 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
CGS74C2525M	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL			SOP				STANDARD	1	CMOS			3.3			0			12.5 ns			1.27 mm	85 Cel		.6 ns	-40 Cel		8						6 V	1.753 mm	3.9 mm			2 V						8.6235 mm	CMOS
SNCDC328ADR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel		1 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
CDC337DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP20,.4	9 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V			e4	30	260	12.825 mm	337
SN65LVELT22DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2			TR	3.3			0	SMALL OUTLINE		.55 ns			1.27 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	4.9 mm	65EL
SN65EL11DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				5	+-5		0	SMALL OUTLINE	SOP8,.25	.3 ns		Clock Drivers	1.27 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified		4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e4	30	260	4.9 mm	65EL
SNCDC208DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			5		50 pF	0	SMALL OUTLINE		11.5 ns			1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				12.8 mm	ACT
CDC329ADR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	5	5		0	SMALL OUTLINE	SOP16,.25	5.9 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel		1.5 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		80 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	POLARITY CONTROL SELECTS TRUE OR COMPLEMENTARY OUTPUTS	e4	30	260	9.9 mm	329
CDC208NSG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	4	TUBE	5	5	50 pF	0	SMALL OUTLINE	SOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.6 mm	208
DS0026CMA	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	MOS						1	SMALL OUTLINE					1.27 mm	70 Cel			0 Cel		0	DUAL			R-PDSO-G8		20 V	1.753 mm	3.9 mm			10 V						4.9 mm	DS00
SN65LVEL11DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	3.3	+-3.3		0	SMALL OUTLINE	SOP8,.25	.35 ns		Clock Drivers	1.27 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified		3 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e4	30	260	4.9 mm	65LVEL
CDC328ADRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP16,.25	5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		100 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	9.9 mm	328
CGS64C2525M	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3			0	SMALL OUTLINE		12.5 ns			1.27 mm	85 Cel		.6 ns	-40 Cel		8	DUAL			R-PDSO-G14		6 V	1.753 mm	3.9 mm			2 V						8.6235 mm	CMOS
CDC351DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.2 ns	32 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	25 mA		e4	NOT SPECIFIED	260	15.4 mm	351
CDC328ADR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	5	5		0	SMALL OUTLINE	SOP16,.25	5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		100 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	9.9 mm	328
CDC351IDBG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3	50 pF	0	SMALL OUTLINE	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	25 mA		e4	NOT SPECIFIED	260	15.4 mm	351
CDC2351DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.8 ns	12 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	15 mA		e4	NOT SPECIFIED	260	15.4 mm	2351
CDC338DW	Texas Instruments		INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS			5	5			SMALL OUTLINE	SOP20,.4		48 Amp	Clock Drivers	1.27 mm	85 Cel			-40 Cel			DUAL			R-PDSO-G20					Not Qualified

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.