SSOP Clock Drivers & Buffers 620

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SNCDC208DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		11.5 ns			.65 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				7.2 mm	ACT
CDC2351QDBG4	Texas Instruments	LOW SKEW CLOCK DRIVER	AUTOMOTIVE	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	11 ns	12 Amp	Clock Drivers	.65 mm	125 Cel	3-STATE WITH SERIES RESISTOR	2.5 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	15 mA		e4	NOT SPECIFIED	260	8.2 mm	2351
SNCDC391DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5 ns			.65 mm	85 Cel	3-STATE	1 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
CDC2536DBG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3	15 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6	DUAL		100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	2 mA		e4	NOT SPECIFIED	260	10.2 mm	2536
CDCF5801ADBQRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		TR	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		40 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	1	DUAL		280 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V		DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE	e4	NOT SPECIFIED	260	8.65 mm	5801
CDCFR83DBQRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		TR	3.3			1	SMALL OUTLINE, SHRINK PITCH			36 Amp		.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		533 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V	100 mA		e4	30	260	8.65 mm	83
CDCR83DBQRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3			0	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		400 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V			e4	30	260	8.65 mm	83
CDC351DBR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.2 ns	32 Amp	Clock Driver	.65 mm	70 Cel	3-STATE	.8 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	25 mA		e4	30	260	8.2 mm	351
SNCDC351DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3		50 pF	0	SMALL OUTLINE, SHRINK PITCH					.65 mm	70 Cel	3-STATE	.5 ns	0 Cel		10	DUAL			R-PDSO-G24		3.6 V	2 mm	5.3 mm	Not Qualified		3 V	25 mA	MAX PART TO PART SKEW = 1NS				8.2 mm	ABT
SNCDC328ADB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5.5 ns			.65 mm	85 Cel		1.1 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	32 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
CDCFR83DBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3			1	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		533 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V			e4	30	260	8.65 mm	83
SNCDC208-7DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		11.5 ns			.65 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				7.2 mm	ACT
CDC339DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	9 ns	48 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	85 mA		e4	30	260	7.2 mm	CDC
CDC319DBG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3	30 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3.6 ns	6 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.25 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL			R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified		3.135 V	.5 mA		e4	30	260	10.2 mm	319
SNCDC2536DL	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	BICMOS			3.3		15 pF	0	SMALL OUTLINE, SHRINK PITCH					.635 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		6	DUAL		100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.5 mm	Not Qualified		3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; O/P FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F				9.525 mm	ABT
SNCDC208-7DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		11.5 ns			.65 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				7.2 mm	ACT
CDC208DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	4	TR	5	5	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	.65 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	208
CDC329ADBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	5.9 ns		Clock Drivers	.65 mm	85 Cel		1.5 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	6.2 mm	329
CDC340DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	4.8 ns	48 Amp	Clock Drivers	.65 mm	70 Cel		.6 ns	0 Cel		8	DUAL			R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	340
CDCR83DBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3			0	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		400 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V			e4	30	260	8.65 mm	83
SNCDC329ADBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5.9 ns			.65 mm	85 Cel		1.5 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	40 mA					6.2 mm	ABT
CDC351DBG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.8 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V			e4	30	260	8.2 mm	351
CDC2351DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.8 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		10	DUAL		100 MHz	R-PDSO-G24		3.6 V	2 mm	5.3 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	8.2 mm	2351
CDC319DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3.6 ns	6 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.25 ns	0 Cel		10	DUAL		100 MHz	R-PDSO-G28		3.465 V	2 mm	5.3 mm	Not Qualified		3.135 V				NOT SPECIFIED	NOT SPECIFIED	10.2 mm	CDC
CDC351IDBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V			e4	30	260	8.2 mm	351
CDC328ADB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	5 ns	48 Amp	Clock Drivers	.65 mm	85 Cel		1 ns	-40 Cel		6	DUAL		100 MHz	R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	6.2 mm	328
SNCDC2536DLR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	BICMOS			3.3		15 pF	0	SMALL OUTLINE, SHRINK PITCH					.635 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		6	DUAL		100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.5 mm	Not Qualified		3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; O/P FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F				9.525 mm	ABT
CDCR83ADBQG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			1	SMALL OUTLINE, SHRINK PITCH				Clock Driver	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL			R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V			e4	30	260	8.65 mm	CDC
CDC351DB	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.8 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	25 mA		e4	30	260	8.2 mm	351
CDC2351QDBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	AUTOMOTIVE	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	11 ns	12 Amp	Clock Drivers	.65 mm	125 Cel	3-STATE WITH SERIES RESISTOR	2.5 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	15 mA		e4	NOT SPECIFIED	260	8.2 mm	2351
CDC2536DB	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3	15 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL		125 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	2 mA		e4	30	260	10.2 mm	2536
CDC328ADBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	5 ns	48 Amp	Clock Drivers	.65 mm	85 Cel		1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6	DUAL		100 MHz	R-PDSO-G16	1	5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	NOT SPECIFIED	260	6.2 mm	328
SNCDC328DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5.4 ns			.65 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	30 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
SNCDC536DL	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	BICMOS			3.3		15 pF	0	SMALL OUTLINE, SHRINK PITCH					.635 mm	70 Cel	3-STATE	.5 ns	0 Cel		6	DUAL		100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.5 mm	Not Qualified		3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; O/P FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F				9.525 mm	ABT
CDCF5801DBQG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		16 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		280 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V		DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE	e4	30	260	8.65 mm	5801
CDC5801DBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3			1	SMALL OUTLINE, SHRINK PITCH			16 Amp	Clock Driver	.635 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		500 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V	70 mA		e4	30	260	8.65 mm	5801
CDC2351DBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.8 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	15 mA		e4	NOT SPECIFIED	260	8.2 mm	2351
CDC2536DBR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	15 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL		125 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	2 mA		e4	30	260	10.2 mm	2536
V62/04757-01XE	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	11 ns	12 Amp	Clock Drivers	.65 mm	125 Cel	3-STATE WITH SERIES RESISTOR	2.5 ns	-55 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	2	3.6 V	2 mm	5.3 mm	Not Qualified		3 V			e4	30	260	8.2 mm	2351
CDC5801ADBQG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			1	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		500 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	8.65 mm	CDC
SNCDC337DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		9 ns			.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	85 mA	4 OUTPUTS ARE BUFFERED & THE OTHER 4 ARE DIVIDED BY TWO				7.2 mm	ABT
CDC318DLR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	4.5 ns	6 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE	.25 ns	0 Cel		18	DUAL			R-PDSO-G48		3.465 V	2.79 mm	7.49 mm	Not Qualified		3.135 V				NOT SPECIFIED	NOT SPECIFIED	15.875 mm	318
CDC536DBG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL		100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V			e4	30	260	10.2 mm	536
SNCDC351DB	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3		50 pF	0	SMALL OUTLINE, SHRINK PITCH					.65 mm	70 Cel	3-STATE	.5 ns	0 Cel		10	DUAL			R-PDSO-G24		3.6 V	2 mm	5.3 mm	Not Qualified		3 V		MAX PART TO PART SKEW = 1NS				8.2 mm	ABT
CDCF5801ADBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		TUBE	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		40 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		280 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V		DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE	e4	30	260	8.65 mm	5801
CDC2351DBR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.8 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	15 mA		e4	NOT SPECIFIED	260	8.2 mm	2351
CDC2351MDBREP	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	11 ns	12 Amp	Clock Driver	.65 mm	125 Cel	3-STATE WITH SERIES RESISTOR	2.5 ns	-55 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	2	3.6 V	2 mm	5.3 mm	Not Qualified		3 V			e4	30	260	8.2 mm	2351
CDC337DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	9 ns	32 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	337

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.