RECTANGULAR Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SNCDC536DLR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	BICMOS				3.3		15 pF	0	SMALL OUTLINE, SHRINK PITCH					.635 mm	70 Cel	3-STATE	.5 ns	0 Cel		6	DUAL		100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.5 mm	Not Qualified		3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; O/P FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F				9.525 mm	ABT
SN74AS304D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL				5	5	50 pF	0	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1 ns	0 Cel		8	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V	75 mA			NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
CDC208DWG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4		5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e4	30	260	12.8 mm	208
CDC2509APWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1					3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2509
CDC2510APW	Texas Instruments		COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES							3.3	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.635 mm	70 Cel			0 Cel			DUAL			R-PDSO-G24					Not Qualified
CDC516DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		20 Amp	Clock Drivers	.5 mm	70 Cel		.2 ns	0 Cel	NICKEL PALLADIUM GOLD	16	DUAL		125 MHz	R-PDSO-G48	2	3.6 V	1.2 mm	6.1 mm	Not Qualified		3 V	.02 mA		e4	30	260	12.5 mm	516
SNCDC392D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel	3-STATE	2.2 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
SN74AS303DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL				5		50 pF	2	SMALL OUTLINE		9 ns			1.27 mm	70 Cel		2 ns	0 Cel		6	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V	70 mA					9.9 mm	AS
SNCDC339DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		9 ns			.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	85 mA	4 OUTPUTS ARE BUFFERED & THE OTHER 4 ARE DIVIDED BY TWO				7.2 mm	ABT
CDC351DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.2 ns	32 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	25 mA		e4	30	260	15.4 mm	351
SNCDC328DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE		5.4 ns			1.27 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	30 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
CDC2509BPWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	9	DUAL		125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	NOT SPECIFIED	260	7.8 mm	2509
SNCDC328ADR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel		1 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
CDC337DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP20,.4	9 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V			e4	30	260	12.825 mm	337
SNCDC328DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5.4 ns			.65 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	30 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
CDC328ADBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	5 ns	48 Amp	Clock Drivers	.65 mm	85 Cel		1 ns	-40 Cel		6	DUAL		100 MHz	R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	328
CDCFR83ADBQR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TR	3.3			1	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		533 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V			e4	30	260	8.65 mm	CDCF
CDC2510PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1					3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Driver	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2510
CDCF5801DBQRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			TR	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		16 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		280 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V	75 mA	DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE	e4	30	260	8.65 mm	5801
CDCF2509PW	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Driver	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL		140 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2509
SN65LVELT22DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2				TR	3.3			0	SMALL OUTLINE		.55 ns			1.27 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	4.9 mm	65EL
SN74SSQEA32882ZALR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	BALL	176	TFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			TR	1.35	1.35/1.5		0	GRID ARRAY, THIN PROFILE, FINE PITCH	BGA176,11X20,25			Other Logic ICs	.65 mm	85 Cel	OPEN-DRAIN		0 Cel	TIN SILVER COPPER	4	BOTTOM		810 MHz	R-PBGA-B176	3		1.2 mm	8 mm	Not Qualified					e1	30	260	13.5 mm	SSQE
SN65EL11DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					5	+-5		0	SMALL OUTLINE	SOP8,.25	.3 ns		Clock Drivers	1.27 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified		4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e4	30	260	4.9 mm	65EL
SNCDC208DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS				5		50 pF	0	SMALL OUTLINE		11.5 ns			1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				12.8 mm	ACT
CDC509PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		20 Amp	Clock Drivers	.65 mm	70 Cel		.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL		125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	509
CDC329ADR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	5	5		0	SMALL OUTLINE	SOP16,.25	5.9 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel		1.5 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		80 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	POLARITY CONTROL SELECTS TRUE OR COMPLEMENTARY OUTPUTS	e4	30	260	9.9 mm	329
CDC3RL02BYFPR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	UNSPECIFIED	YES	STANDARD	1					1.8			0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH					.4 mm	85 Cel			-40 Cel	TIN SILVER COPPER	2	BOTTOM		52 MHz	R-XBGA-B8	1		.5 mm	.76 mm						e1	30	260	1.56 mm	CDC
SNJ54CDC586WD	Texas Instruments	PLL BASED CLOCK DRIVER	MILITARY	FLAT	56	QFF	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	STANDARD	1	BICMOS	MIL-PRF-38535			3.3	3.3		0	FLATPACK	FL56,.4,25		32 Amp	Clock Drivers	.635 mm	125 Cel	3-STATE	.75 ns	-55 Cel		12	DUAL		100 MHz	R-GDFP-F56		3.6 V	3.05 mm	9.652 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	18.288 mm	CDC
CDCFR83DBQG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS				3.3			1	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		533 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V			e4	30	260	8.65 mm	83
CDC208NSG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4	TUBE	5	5	50 pF	0	SMALL OUTLINE	SOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.6 mm	208
SNCDC392DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5 ns			.65 mm	85 Cel	3-STATE	2.2 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
CDC209DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS				5			0	SMALL OUTLINE, SHRINK PITCH		15.6 ns			.65 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified		3 V						7.2 mm	209
DS0026CMA	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	MOS							1	SMALL OUTLINE					1.27 mm	70 Cel			0 Cel		0	DUAL			R-PDSO-G8		20 V	1.753 mm	3.9 mm			10 V						4.9 mm	DS00
SN65LVEL11DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TR	3.3	+-3.3		0	SMALL OUTLINE	SOP8,.25	.35 ns		Clock Drivers	1.27 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified		3 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e4	30	260	4.9 mm	65LVEL
CDC351IDBR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	25 mA		e4	30	260	8.2 mm	351
SNCDC2351DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				3.3		50 pF	0	SMALL OUTLINE, SHRINK PITCH					.65 mm	70 Cel	3-STATE	.5 ns	0 Cel		10	DUAL			R-PDSO-G24		3.6 V	2 mm	5.3 mm	Not Qualified		3 V	15 mA	MAX PART TO PART SKEW = 1NS				8.2 mm	ABT
CDC536DB	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL		100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V			e4	30	260	10.2 mm	536
CDC2509CPWR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL		125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V	.01 mA		e4	30	260	7.8 mm	2509
V62/13603-01XE-T	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2				TUBE	2.5			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4 ns	12 Amp		.65 mm	125 Cel		.17 ns	-55 Cel	NICKEL PALLADIUM GOLD	5	DUAL		200 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm			2.3 V			e4	30	260	7.8 mm	CDCV
CDC328ADRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP16,.25	5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		100 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	9.9 mm	328
CGS64C2525M	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS				3.3			0	SMALL OUTLINE		12.5 ns			1.27 mm	85 Cel		.6 ns	-40 Cel		8	DUAL			R-PDSO-G14		6 V	1.753 mm	3.9 mm			2 V						8.6235 mm	CMOS
CDC339DBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	9 ns	48 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	339
SNCDC2509PWLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1					3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel	3-STATE	.25 ns	0 Cel		9	DUAL		125 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V						7.8 mm	SNCD
CDC351DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.2 ns	32 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	25 mA		e4	NOT SPECIFIED	260	15.4 mm	351
CDC328ADR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	5	5		0	SMALL OUTLINE	SOP16,.25	5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		100 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	9.9 mm	328
CDC351IDBG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TUBE	3.3	3.3	50 pF	0	SMALL OUTLINE	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	25 mA		e4	NOT SPECIFIED	260	15.4 mm	351
CDCF5801DBQR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			TR	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		16 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		280 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V	75 mA	DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE	e4	30	260	8.65 mm	5801
CDC2351DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.8 ns	12 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	15 mA		e4	NOT SPECIFIED	260	15.4 mm	2351

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.