SQUARE Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MAX9451EHJ+	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	32	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	CMOS		3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH					.5 mm	85 Cel	3-STATE	.106 ns	-40 Cel	MATTE TIN	2	QUAD	160 MHz	S-PQFP-G32	1	3.6 V	1.2 mm	5 mm	Not Qualified	2.4 V			e3	30	260	5 mm	9451
MAX9174EUB	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS		3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	3.23 ns		Clock Drivers	.5 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	2	DUAL		S-PDSO-G10	1	3.6 V	1.1 mm	3 mm	Not Qualified	3 V			e0			3 mm
MAX9314EGJ	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	DIFFERENTIAL	2			2.5	2.5/3.3	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20	.41 ns		Clock Drivers	.5 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	5	QUAD		S-CQCC-N32		3.8 V	1 mm	5 mm	Not Qualified	2.25 V		CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR DIFFERENTIAL LVECL	e0			5 mm
MAX9326EGI-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	BIPOLAR		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.506 ns			.5 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	9	QUAD		S-XQCC-N28	1	3.8 V	.9 mm	5 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			5 mm
MAX9317CECJ+	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	BIPOLAR		3.3		FLATPACK, LOW PROFILE		.6 ns			.8 mm	85 Cel		.045 ns	-40 Cel	MATTE TIN	5	QUAD	1000 MHz	S-PQFP-G32	1	3.6 V	1.6 mm	7 mm	Not Qualified	3 V			e3	30	260	7 mm
MAX9323ETP	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	MUX	1	BICMOS		3.3	3.3	CHIP CARRIER, VERY THIN PROFILE	LCC20,.16SQ,20	.6 ns		Clock Drivers	.5 mm	85 Cel		.03 ns	-40 Cel	TIN LEAD	4	QUAD	1500 MHz	S-XQCC-N20	1	3.6 V	.8 mm	4 mm	Not Qualified	3 V			e0			4 mm
MAX9317ECJ	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	BIPOLAR		2.5	2.5	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.6 ns		Clock Drivers	.8 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	5	QUAD	1000 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V			e0			7 mm
MAX9325EQI	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR		3.3	+-2.375/+-3.8	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			11.505 mm	9325
MAX9312EHJ	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2			2.5	2.5/3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	.41 ns		Clock Drivers	.5 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	5	QUAD		S-PQFP-G32	1	3.8 V	1.2 mm	5 mm	Not Qualified	2.25 V		CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR DIFFERENTIAL LVECL	e0			5 mm
MAX9317AECJ-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	BIPOLAR		2.5		FLATPACK, LOW PROFILE		.6 ns			.8 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	5	QUAD	1000 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V			e0			7 mm
MAX9326ETI	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	BIPOLAR		3.3	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	.685 ns		Clock Drivers	.5 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	9	QUAD		S-XQCC-N28	1	3.8 V	.9 mm	5 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			5 mm
MAX9326EQI+T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BIPOLAR		3.3	3.3	CHIP CARRIER	LDCC28,.5SQ	.685 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28		3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e3			11.505 mm
MAX9311EHJ	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	.41 ns		Clock Drivers	.5 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	10	QUAD		S-PQFP-G32	1	3.8 V	1.2 mm	5 mm	Not Qualified	2.25 V		CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR LVECL	e0			5 mm	9311
MAX9175EUB-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3.23 ns			.5 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	2	DUAL		S-PDSO-G10	1	3.6 V	1.1 mm	3 mm	Not Qualified	3 V			e0		245	3 mm
MAX9451EHJ	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	32	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	CMOS		3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH					.5 mm	85 Cel	3-STATE	.106 ns	-40 Cel	TIN LEAD	2	QUAD	160 MHz	S-PQFP-G32	1	3.6 V	1.2 mm	5 mm	Not Qualified	2.4 V			e0		245	5 mm	9451
MAX9313ECJ-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.41 ns		Clock Drivers	.8 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	10	QUAD		S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified	2.25 V		CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR LVECL	e0			7 mm	9313
MAX9323ETP-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	MUX	1	BICMOS		3.3		CHIP CARRIER, VERY THIN PROFILE		.6 ns			.5 mm	85 Cel		.03 ns	-40 Cel	TIN LEAD	4	QUAD	1500 MHz	S-XQCC-N20	1	3.6 V	.8 mm	4 mm	Not Qualified	3 V			e0			4 mm
MAX9317BECJ-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	BIPOLAR		3.3		FLATPACK, LOW PROFILE		.6 ns			.8 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	5	QUAD	1000 MHz	S-PQFP-G32	1	3.6 V	1.6 mm	7 mm	Not Qualified	3 V			e0			7 mm
MAX9314ECJ-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2			2.5	2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP32,.35SQ,32	.41 ns		Clock Drivers	.8 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	5	QUAD		S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified	2.25 V		CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR DIFFERENTIAL LVECL	e0			7 mm
MAX9313ECJ+T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			2.5		FLATPACK, LOW PROFILE		.41 ns			.8 mm	85 Cel		.046 ns	-40 Cel	Matte Tin (Sn)	20	QUAD		S-PQFP-G32	1	3.8 V	1.6 mm	7 mm		2.25 V		CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR LVECL	e3	30	260	7 mm	9313
MAX9317CETJ	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	DIFFERENTIAL	2	BIPOLAR		3.3	3.3	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20	.6 ns		Clock Drivers	.5 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	5	QUAD	1000 MHz	S-CQCC-N32	1	3.6 V	.8 mm	5 mm	Not Qualified	3 V			e0			5 mm
MAX9452EHJ	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	32	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	CMOS		3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH					.5 mm	85 Cel	3-STATE	.106 ns	-40 Cel	TIN LEAD	2	QUAD	160 MHz	S-PQFP-G32	1	3.6 V	1.2 mm	5 mm	Not Qualified	2.4 V			e0			5 mm	9452
MAX9317AETJ-T	Maxim Integrated	LOW SKEW CLOCK DRIVER		NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	2	BIPOLAR	TR	2.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.6 ns			.5 mm	85 Cel		.025 ns	-40 Cel		10	QUAD		S-XQCC-N32		2.625 V	.8 mm	5 mm		2.375 V	107 mA			NOT SPECIFIED	NOT SPECIFIED	5 mm	9317
MAX9311ECJ-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.41 ns		Clock Drivers	.8 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	10	QUAD		S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified	2.25 V		CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR LVECL	e0		245	7 mm	9311
MAX9312ECJ	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2			2.5	2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP32,.35SQ,32	.41 ns		Clock Drivers	.8 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	5	QUAD		S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified	2.25 V		CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR DIFFERENTIAL LVECL	e0			7 mm
MAX9317AECJ+T	Maxim Integrated	CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	BIPOLAR		2.5		FLATPACK, LOW PROFILE		.6 ns			.8 mm	85 Cel		.045 ns	-40 Cel	Matte Tin (Sn)	5	QUAD	1000 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V			e3	30	260	7 mm
MAX9325EGI	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	BIPOLAR		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.586 ns			.5 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	8	QUAD		S-XQCC-N28	1	3.8 V	.9 mm	5 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			5 mm	9325
MAX9324ETP	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	BICMOS		3.3	3.3	CHIP CARRIER, VERY THIN PROFILE	LCC20,.16SQ,20	.6 ns	4 Amp	Clock Drivers	.5 mm	85 Cel		.03 ns	-40 Cel	TIN LEAD	4	QUAD	650 MHz	S-XQCC-N20	1	3.6 V	.8 mm	4 mm	Not Qualified	3 V			e0			4 mm
MAX9451EHJ-T	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	32	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	CMOS		3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH					.5 mm	85 Cel	3-STATE	.106 ns	-40 Cel	TIN LEAD	2	QUAD	160 MHz	S-PQFP-G32	1	3.6 V	1.2 mm	5 mm	Not Qualified	2.4 V			e0			5 mm	9451
MAX9451EHJ+T	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	32	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	CMOS		3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH					.5 mm	85 Cel	3-STATE	.106 ns	-40 Cel	MATTE TIN	2	QUAD	160 MHz	S-PQFP-G32	1	3.6 V	1.2 mm	5 mm	Not Qualified	2.4 V			e3	30	260	5 mm	9451
MAX9317ECJ+	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	BIPOLAR		2.5	2.5	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.6 ns		Clock Drivers	.8 mm	85 Cel		.045 ns	-40 Cel	MATTE TIN	5	QUAD	1000 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V			e3	30	260	7 mm
MAX9322ECY+D	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR		3.3	+-2.375/+-3.8	FLATPACK, THIN PROFILE	TQFP52,.47SQ,25	1.175 ns		Clock Drivers	.65 mm	85 Cel		.056 ns	-40 Cel	TIN	15	QUAD	93 MHz	S-PQFP-G52	3	3.8 V	1.2 mm	10 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e3			10 mm	9322
MAX9322ECY+TD	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR		3.3	+-2.375/+-3.8	FLATPACK, THIN PROFILE	TQFP52,.47SQ,25	1.175 ns		Clock Drivers	.65 mm	85 Cel		.056 ns	-40 Cel	TIN	15	QUAD	93 MHz	S-PQFP-G52	3	3.8 V	1.2 mm	10 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e3			10 mm	9322
MAX9313EGJ-T	Maxim Integrated	CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.41 ns		Clock Drivers	.5 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	10	QUAD		S-XQCC-N32	1	3.8 V	1 mm	5 mm	Not Qualified	2.25 V		CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR LVECL	e0			5 mm	9313
MAX9311EHJ-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	.41 ns		Clock Drivers	.5 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	10	QUAD		S-PQFP-G32	1	3.8 V	1.2 mm	5 mm	Not Qualified	2.25 V		CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR LVECL	e0			5 mm	9311
MAX9311ECJ	Maxim Integrated	CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.41 ns		Clock Drivers	.8 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	10	QUAD		S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified	2.25 V		CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR LVECL	e0			7 mm	9311
MAX9314ECJ+	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2			2.5		FLATPACK, LOW PROFILE, FINE PITCH		.41 ns			.8 mm	85 Cel		.046 ns	-40 Cel	MATTE TIN	5	QUAD		S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified	2.25 V		CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR DIFFERENTIAL LVECL	e3	30	260	7 mm
MAX9322ECY	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR		3.3	+-2.375/+-3.8	FLATPACK, THIN PROFILE	TQFP52,.47SQ,25	1.175 ns		Clock Drivers	.65 mm	85 Cel		.056 ns	-40 Cel	TIN LEAD	15	QUAD	93 MHz	S-PQFP-G52	3	3.8 V	1.2 mm	10 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			10 mm	9322
MAX9313EGJ+T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.41 ns			.5 mm	85 Cel		.046 ns	-40 Cel		20	QUAD		S-XQCC-N32		3.8 V	1 mm	5 mm		2.25 V		CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR LVECL		NOT SPECIFIED	NOT SPECIFIED	5 mm	9313
MAX9320BEUA	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			5	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.265 ns		Clock Drivers	.65 mm	85 Cel		.03 ns	-40 Cel	TIN LEAD	2	DUAL	3000 MHz	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	3 V		ECL/LVECL MODE: VCC = 0 V WITH VEE = -3 V TO -5.5 V	e0			3 mm
MAX9313EGJ	Maxim Integrated	CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.41 ns		Clock Drivers	.5 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	10	QUAD		S-XQCC-N32	1	3.8 V	1 mm	5 mm	Not Qualified	2.25 V		CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR LVECL	e0			5 mm	9313
MAX9317ECJ+T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	BIPOLAR		2.5	2.5	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.6 ns		Clock Drivers	.8 mm	85 Cel		.045 ns	-40 Cel	MATTE TIN	5	QUAD	1000 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V			e3			7 mm
MAX9322ECY-D	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR		3.3	+-2.375/+-3.8	FLATPACK, THIN PROFILE	TQFP52,.47SQ,25	1.175 ns		Clock Drivers	.65 mm	85 Cel		.056 ns	-40 Cel	TIN LEAD	15	QUAD	93 MHz	S-PQFP-G52	3	3.8 V	1.2 mm	10 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			10 mm	9322
MAX9325EQI+T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR		3.3		CHIP CARRIER		.8 ns			1.27 mm	85 Cel		.05 ns	-40 Cel		8	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V				11.505 mm	9325
MAX9326EGI	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	BIPOLAR		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.506 ns			.5 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	9	QUAD		S-XQCC-N28	1	3.8 V	.9 mm	5 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			5 mm
MAX9314EHJ	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2			2.5	2.5/3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	.41 ns		Clock Drivers	.5 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	5	QUAD		S-PQFP-G32	1	3.8 V	1.2 mm	5 mm	Not Qualified	2.25 V		CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR DIFFERENTIAL LVECL	e0			5 mm
MAX9174ETB	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	10	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	CMOS		3.3	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.11,20	3.23 ns		Clock Drivers	.5 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	2	QUAD		S-XQCC-N10	1	3.6 V	.8 mm	3 mm	Not Qualified	3 V			e0			3 mm
MAX9326EQI-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BIPOLAR		3.3	3.3	CHIP CARRIER	LDCC28,.5SQ	.685 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	9	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			11.505 mm

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.