SQUARE Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
CDCM7005RGZT	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	SCHMITT TRIGGER MUX	1			TR	3.3		10 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 ns	8 Amp		.5 mm	85 Cel	3-STATE	2.4 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	QUAD	1500 MHz	S-PQCC-N48	3	3.6 V	1 mm	7 mm	Not Qualified	3 V	260 mA	USER DEFINABLE FIVE DIFFERENTIAL LVPECL OUTPUT; DIFFERENTIAL VCO IN CLOCK	e4	30	260	7 mm	7005
MC100LVEL11DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		3.3	-3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.405 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	MATTE TIN	2	DUAL	1000 MHz	S-PDSO-G8	3	3.8 V	1.1 mm	3 mm	Not Qualified	3 V		NECL MODE: 0V VCC WITH VEE = -3V TO -3.8V	e3	30	260	3 mm	100LVEL
MC100LVEP11DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	TUBE	2.5	+-2.375/+-3.8		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.31 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	MATTE TIN	2	DUAL		S-PDSO-G8	3	3.8 V	1.1 mm	3 mm	Not Qualified	2.375 V	50 mA	NECL MODE : VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	3 mm	100LVE
MC10E111FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN	9	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 V WITH VEE = -4.2 V TO -5.7 V	e3		260	11.505 mm	10E
SI53304-B-GMR	Silicon Labs	LOW SKEW CLOCK DRIVER		NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	2			TR	1.8			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1 ns			.5 mm	85 Cel		.12 ns	-40 Cel		6	QUAD		S-XQCC-N32		1.89 V	1 mm	5 mm		1.71 V	100 mA	ALSO OPERATES AT 2.5 V AND 3.3 V SUPPLY				5 mm	53304
SN65ELT23DGK	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2			TUBE	5		20 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		5 ns	24 Amp		.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	4.75 V			e4	30	260	3 mm	65ELT
SN65ELT23DGKR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2			TR	5		20 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		5 ns	24 Amp		.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	4.75 V			e4	30	260	3 mm	65ELT
SN65LVELT23DGKR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2			TR	3.3		20 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.5 ns	24 Amp		.65 mm	85 Cel		.18 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL	180 MHz	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	3 V			e4	30	260	3 mm	65LVEL
SY89838UMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			TUBE	2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.95 ns			.5 mm	85 Cel		.04 ns	-40 Cel	NICKEL PALLADIUM GOLD	16	QUAD	1500 MHz	S-XQCC-N32	2	2.625 V	.9 mm	5 mm	Not Qualified	2.375 V	350 mA		e4			5 mm	89838
SY89856UMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			TUBE	2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.4 ns			.5 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	QUAD	3000 MHz	S-XQCC-N32	2	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		CAN ALSO OPERATE WITH 3.3V SUPPLY	e4		260	5 mm	89856
SY89872UMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			TUBE	2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.75 ns			.5 mm	85 Cel		.015 ns	-40 Cel	MATTE TIN	1	QUAD	2000 MHz	S-XQCC-N16	2	2.625 V	.95 mm	3 mm	Not Qualified	2.375 V		CAN ALSO OPERATE WITH 3.3V SUPPLY	e3			3 mm	89872
ZL40213LDG1	Microchip Technology	LOW SKEW CLOCK DRIVER		NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		CMOS	TRAY	2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	2 ns			.5 mm	85 Cel		.1 ns	-40 Cel		4	QUAD		S-XQCC-N16		2.625 V	1 mm	3 mm		2.375 V		ALSO OPERATES AT 3.3 V SUPPLY				3 mm	4000/14000/40000
AD9512BCPZ-REEL7	Analog Devices	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1		CMOS		3.3	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.76 ns		Clock Drivers	.5 mm	85 Cel		1.43 ns	-40 Cel	MATTE TIN	5	QUAD	1200 MHz	S-XQCC-N48	3	3.465 V	1 mm	7 mm	Not Qualified	3.135 V			e3	30	260	7 mm	9512
AD9517-1ABCPZ-RL7	Analog Devices	CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			TR	3.3	3.3,3.3/5	10 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	2.6 ns		Clock Drivers	.5 mm	85 Cel	3-STATE	.675 ns	-40 Cel	MATTE TIN	8	QUAD	2950 MHz	S-XQCC-N48	3	3.465 V	.8 mm	7 mm	Not Qualified	3.135 V			e3	30	260	7 mm	9517
ADCLK944BCPZ-R7	Analog Devices	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		BIPOLAR		2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.13 ns			.5 mm	85 Cel		.015 ns	-40 Cel	MATTE TIN	8	QUAD		S-XQCC-N16	3	3.63 V	.8 mm	3 mm	Not Qualified	2.375 V	214 mA		e3	40	260	3 mm	944
CDCLVD1212RHAR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	MUX	1			TR	2.5	2.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	2.5 ns		Clock Drivers	.5 mm	85 Cel		.05 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	12	QUAD	800 MHz	S-PQCC-N40	3	2.625 V	1 mm	6 mm	Not Qualified	2.375 V			e4	NOT SPECIFIED	260	6 mm	CDC
CDCLVD2104RHDR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2			TR	2.5	2.5		CHIP CARRIER	LCC28,.2SQ,20	2.5 ns		Clock Drivers	.5 mm	85 Cel		.035 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	QUAD	800 MHz	S-PQCC-N28	2	2.625 V	1 mm	5 mm	Not Qualified	2.375 V			e4	NOT SPECIFIED	260	5 mm	CDC
LMK03318RHSR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				3.3			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel		1.5 ns	-40 Cel	Matte Tin (Sn)	16	QUAD	200 MHz	S-PQCC-N48	3	3.465 V	.8 mm	7 mm		3.135 V			e3	NOT SPECIFIED	260	7 mm	LMK
MC100LVEP111FAR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		2.5	+-2.375/+-3.8		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.5 ns		Clock Drivers	.8 mm	85 Cel		.025 ns	-40 Cel	TIN SILVER COPPER	10	QUAD		S-PQFP-G32		3.8 V	1.6 mm	7 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e1			7 mm	100LVE
SI53152-A01AGM	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				3.3	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		1 Amp	Clock Drivers	.5 mm	85 Cel			-40 Cel		4	QUAD		S-XQCC-N24		3.465 V	.8 mm	4 mm	Not Qualified	3.135 V						4 mm	53152
SY58035UMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			TUBE	2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.32 ns			.5 mm	85 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	12	QUAD	4500 MHz	S-XQCC-N32	2	2.625 V	.9 mm	5 mm	Not Qualified	2.375 V	250 mA	IT ALSO OPERATE ON 3.3V SUPPLY	e4			5 mm	58035
SY89854UMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			TUBE	2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.34 ns			.5 mm	85 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	QUAD	2000 MHz	S-XQCC-N16	2	2.625 V	.9 mm	3 mm	Not Qualified	2.375 V	78 mA	IT ALSO OPERATE ON 3.3V SUPPLY	e4			3 mm	89854
9DBL0452BKILFT	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			TR	3.3			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20				.5 mm	85 Cel		.055 ns	-40 Cel	TIN	4	QUAD		S-XQCC-N32	3	3.465 V	1 mm	5 mm		3.135 V	37 mA		e3		260	5 mm	9DBL
AD9517-1BCPZ-REEL7	Analog Devices	CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				3.3			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.6 ns			.5 mm	85 Cel	3-STATE	.675 ns	-40 Cel	MATTE TIN	8	QUAD	2950 MHz	S-XQCC-N48	3	3.465 V	1 mm	7 mm	Not Qualified	3.135 V			e3		260	7 mm	9517
MC100E111FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.78 ns		Clock Drivers	1.27 mm	85 Cel	3-STATE	.075 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 V WITH VEE = -4.2 V TO -5.7 V	e3	30	260	11.505 mm	100E
NB7L32MMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	14000000000 Hz			3.3	2.5/3,3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.3 ns		Prescaler/Multivibrators	.5 mm	85 Cel		.05 ns	-40 Cel	NICKEL GOLD PALLADIUM	1	QUAD		S-XQCC-N16	1	3.465 V	1 mm	3 mm	Not Qualified	2.375 V	80 mA	ALSO OPERATES WITH 3.3V SUPPLY		30	260	3 mm	7L
8732AY-01LFT	Renesas Electronics	PLL BASED CLOCK DRIVER		GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	3.3			FLATPACK, LOW PROFILE	QFP52,.47SQ				.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	0 Cel	TIN	8	QUAD		S-PQFP-G52	3	3.465 V	1.6 mm	10 mm		3.135 V	165 mA		e3		260	10 mm	8732
CY7B994V-2BBIT	Infineon Technologies	PLL BASED CLOCK DRIVER		BALL	100	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	3.3			GRID ARRAY, LOW PROFILE	BGA100,10X10,40	.25 ns	30 Amp		1 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	-40 Cel		6	BOTTOM	200 MHz	S-PBGA-B100		3.63 V	1.4 mm	11 mm		2.97 V	250 mA					11 mm	7B
SY89228UMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			TUBE	2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.5 ns			.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	QUAD	1500 MHz	S-XQCC-N16	2	2.625 V	.9 mm	3 mm	Not Qualified	2.375 V		ALSO OPERATES WITH 3.3 VOLT SUPPLY	e4	40	260	3 mm	89228
SY89872UMG-TR	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			TR	2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.75 ns			.5 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	QUAD	2000 MHz	S-XQCC-N16	2	2.625 V	.95 mm	3 mm	Not Qualified	2.375 V		IT ALSO HAS CLOCK OUTPUTS QA AND QA BAR WITH DIFFERENTIAL MUX INPUT CONDITIONING	e4			3 mm	89872
854S202AYILFT	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				3.3			FLATPACK, LOW PROFILE, FINE PITCH					.5 mm	85 Cel			-40 Cel	MATTE TIN	12	QUAD		S-PQFP-G48	3	3.465 V	1.6 mm	7 mm	Not Qualified	3.135 V			e3	30	260	7 mm	854S
9DBV0841AKILF	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				1.8	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16		2 Amp	Clock Drivers	.4 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	16	QUAD		S-XQCC-N48	3	1.9 V	1 mm	6 mm	Not Qualified	1.7 V			e3		260	6 mm	9DBV
AD9517-3ABCPZ-RL7	Analog Devices	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				3.3	3.3,3.3/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	2.6 ns		Clock Drivers	.5 mm	85 Cel	3-STATE	.675 ns	-40 Cel	MATTE TIN	8	QUAD	2950 MHz	S-XQCC-N48	3	3.465 V	1 mm	7 mm	Not Qualified	3.135 V			e3	30	260	7 mm	9517
CDCM61001RHBR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	MUX	1			TR	3.3		5 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD SILVER	1	QUAD	683.28 MHz	S-PQCC-N32	2	3.6 V	1 mm	5 mm	Not Qualified	3 V			e4	30	260	5 mm	61001
LMH1982SQE/NOPB	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1			TR	3.3		15 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	70 Cel	3-STATE		0 Cel	MATTE TIN	2	QUAD	148.5 MHz	S-XQCC-N32	1	3.465 V	.8 mm	5 mm		3.135 V	70 mA	ALSO REQUIRES 2.5V SUPPLY	e3	30	260	5 mm	1982
SY58031UMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			TUBE	2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.27 ns			.5 mm	85 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	16	QUAD	6000 MHz	S-XQCC-N32	2	2.625 V	.9 mm	5 mm	Not Qualified	2.375 V	330 mA		e4		260	5 mm	58031
SY58606UMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			TUBE	2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.4 ns			.5 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	QUAD	3000 MHz	S-XQCC-N16	2	2.625 V	.95 mm	3 mm	Not Qualified	2.375 V	77 mA	CAN ALSO OPERATE WITH 3.3V SUPPLY	e4			3 mm	58606
851010AYILFT	Renesas Electronics	LOW SKEW CLOCK DRIVER		GULL WING	32	HTQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	3.3			FLATPACK, HEAT SINK/SLUG, THIN PROFILE	TQFP32,.35SQ,32	2.75 ns			.8 mm	85 Cel		.165 ns	-40 Cel	TIN	10	QUAD		S-PQFP-G32	3	3.465 V	1.2 mm	7 mm		3.135 V	105 mA		e3		260	7 mm	851010
852911AVILFT	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				3.3	3.3		CHIP CARRIER	LDCC28,.5SQ	1.7 ns		Clock Drivers	1.27 mm	85 Cel		.1 ns	-40 Cel	MATTE TIN	9	QUAD	500 MHz	S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified	3 V			e3	30	260	11.505 mm	852911
854110AYILFT	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				2.5	2.5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	9.3 ns		Clock Drivers	.8 mm	85 Cel		.55 ns	-40 Cel	MATTE TIN	10	QUAD	200 MHz	S-PQFP-G32	3	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V			e3	30	260	7 mm	854110
87016AYILFT	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				2.5	2.5/3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	4.7 ns	2 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.21 ns	-40 Cel	MATTE TIN	16	QUAD		S-PQFP-G48	3	2.625 V	1.2 mm	7 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3V SUPPLY	e3	30	260	7 mm	87016
8SLVD1212ANLGI/W	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			TR	2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	.5 ns			.5 mm	85 Cel		.04 ns	-40 Cel	TIN	24	QUAD		S-XQCC-N40	3	2.625 V	1 mm	6 mm		2.375 V	213 mA		e3		260	6 mm	8SLVD
8SLVD1212ANLGI8	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			TR	2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	.5 ns			.5 mm	85 Cel		.04 ns	-40 Cel	TIN	24	QUAD		S-XQCC-N40	3	2.625 V	1 mm	6 mm		2.375 V	213 mA		e3		260	6 mm	8SLVD
8SLVD1212NLGI/W	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			TR	2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	.5 ns			.5 mm	85 Cel		.04 ns	-40 Cel	TIN	24	QUAD		S-XQCC-N40	3	2.625 V	1 mm	6 mm		2.375 V	213 mA		e3		260	6 mm	8SLVD
8SLVD1212NLGI8	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			TR	2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	.5 ns			.5 mm	85 Cel		.04 ns	-40 Cel	TIN	24	QUAD		S-XQCC-N40	3	2.625 V	1 mm	6 mm		2.375 V	213 mA		e3		260	6 mm	8SLVD
8V79S680NLGI	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	64	HQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				3.3			CHIP CARRIER, HEAT SINK/SLUG		.85 ns				85 Cel		.1 ns	-40 Cel	TIN	16	QUAD		S-XQCC-N64	3	3.465 V				3.135 V		IT HAS 100 MHZ QREF MAX OUTPUT FREQ	e3		260		8V
8V79S680NLGI8	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	64	HQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				3.3			CHIP CARRIER, HEAT SINK/SLUG		.85 ns				85 Cel		.1 ns	-40 Cel	TIN	16	QUAD		S-XQCC-N64	3	3.465 V				3.135 V		IT HAS 100 MHZ QREF MAX OUTPUT FREQ	e3		260		8V
AD9513BCPZ-REEL7	Analog Devices	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		CMOS	REEL	3.3		5 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	2.01 ns	100 Amp		.5 mm	85 Cel		.51 ns	-40 Cel	MATTE TIN	6	QUAD	800 MHz	S-XQCC-N32	3	3.465 V	1 mm	5 mm	Not Qualified	3.135 V			e3		260	5 mm	9513

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.