COMMERCIAL EXTENDED Clock Drivers & Buffers 33

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
DS3245J	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	STANDARD	1		5		0	IN-LINE					2.54 mm	75 Cel			0 Cel		4	DUAL		R-GDIP-T16		5.25 V	5.08 mm	7.62 mm		4.75 V	LG_MAX				19.94 mm	3245
DS3245N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1		5		0	IN-LINE					2.54 mm	75 Cel			0 Cel		4	DUAL		R-PDIP-T16		5.25 V	5.08 mm	7.62 mm		4.75 V					21.755 mm	3245
LV5609LP	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	NO LEAD	24	VQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1	BICMOS	3.3		0	CHIP CARRIER, VERY THIN PROFILE		200 ns			.5 mm	80 Cel			-20 Cel		4	QUAD		S-XQCC-N24		5.5 V	.83 mm	3.5 mm		2 V					3.5 mm	5609
LV5609V	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	20	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	3.3		0	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		200 ns			.65 mm	80 Cel			-20 Cel		4	DUAL		R-PDSO-G20		5.5 V	1.5 mm	4.4 mm		2 V					6.5 mm	5609
MC100EP809FAR2	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	3.3	1.8,3.3	0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	1 ns		Clock Drivers	.8 mm	85 Cel	OPEN-EMITTER	.05 ns	0 Cel	TIN LEAD	9	QUAD	500 MHz	S-PQFP-G32		3.6 V	1.6 mm	7 mm	Not Qualified	3 V		e0		235	7 mm	100E
MC100H643FN	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL	5	5,-4.5	0	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e0		235	11.505 mm	100H
MC100EP809MNR4G	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	3.3	1.8,3.3	0	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20	1 ns		Clock Drivers	.5 mm	85 Cel		.05 ns	0 Cel	TIN	9	QUAD	500 MHz	S-PQCC-N32	1	3.6 V	1 mm	5 mm	Not Qualified	3 V		e3	30	260	5 mm	100E
MC100H643FNG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL	5	5,-4.5	0	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e3		260	11.505 mm	100H
MC10H643FNR2	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL	5	5,-5.2	0	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e0		235	11.505 mm	10H
MC10H643FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL	5	5,-5.2	0	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e3		260	11.505 mm	10H
MC100EP809FAR2G	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	3.3	1.8,3.3	0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	1 ns		Clock Drivers	.8 mm	85 Cel	OPEN-EMITTER	.05 ns	0 Cel	TIN	9	QUAD	500 MHz	S-PQFP-G32	2	3.6 V	1.6 mm	7 mm	Not Qualified	3 V		e3	30	260	7 mm	100E
MC100EP809FAG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	3.3	1.8,3.3	0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	1 ns		Clock Drivers	.8 mm	85 Cel	OPEN-EMITTER	.05 ns	0 Cel	MATTE TIN	9	QUAD	500 MHz	S-PQFP-G32	2	3.6 V	1.6 mm	7 mm	Not Qualified	3 V		e3	30	260	7 mm	100E
MC10H643FNG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL	5	5,-5.2	0	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e3		260	11.505 mm	10H
MC100H643FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL	5	-4.5	0	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e3		260	11.505 mm	100H
MC100EP809MNG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	3.3	1.8,3.3	0	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20	1 ns		Clock Drivers	.5 mm	85 Cel		.05 ns	0 Cel	MATTE TIN	9	QUAD	500 MHz	S-PQCC-N32	1	3.6 V	1 mm	5 mm	Not Qualified	3 V		e3	30	260	5 mm	100E
MC100H643FNR2	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL	5	-4.5	0	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e0		235	11.505 mm	100H
MC100EP809FA	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	3.3	1.8,3.3	0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	1 ns		Clock Drivers	.8 mm	85 Cel	OPEN-EMITTER	.05 ns	0 Cel	TIN LEAD	9	QUAD	500 MHz	S-PQFP-G32	2	3.6 V	1.6 mm	7 mm	Not Qualified	3 V		e0		235	7 mm	100E
MC10H643FN	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL	5	5,-5.2	0	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN LEAD	8	QUAD		S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e0		235	11.505 mm	10H
PI6CV847L	Diodes Incorporated	CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		2.5	2.5	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.06 ns	0 Cel	TIN LEAD	5	DUAL	200 MHz	R-PDSO-G24	1	2.7 V	1.2 mm	4.4 mm	Not Qualified	2.3 V		e0			7.8 mm	6C
ICS91730AMLFT	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	SMALL OUTLINE					1.27 mm	85 Cel	3-STATE		0 Cel	Matte Tin (Sn) - annealed	1	DUAL		R-PDSO-G8	1	3.465 V	1.75 mm	3.9 mm	Not Qualified	3.135 V		e3	30	260	4.9 mm	9173
93725YFT	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		2.5		6	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel		.3 ns	0 Cel	TIN LEAD	19	DUAL	200 MHz	R-PDSO-G48		2.7 V	2.8 mm	7.5 mm	Not Qualified	2.3 V	ALSO OPERATES WITH 3.3V SUPPLY	e0			15.875 mm	93725
ICS95V847AGLFT	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		2.5	2.5	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		1 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.06 ns	0 Cel	Matte Tin (Sn) - annealed	5	DUAL	210 MHz	R-PDSO-G24	1	2.7 V	1.2 mm	4.4 mm	Not Qualified	2.3 V		e3	30	260	7.8 mm	95V
ICS91730AMLF	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	SMALL OUTLINE					1.27 mm	85 Cel	3-STATE		0 Cel	Matte Tin (Sn) - annealed	1	DUAL		R-PDSO-G8	1	3.465 V	1.75 mm	3.9 mm	Not Qualified	3.135 V		e3	30	260	4.9 mm	9173
ICS842AFILF	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		2.5		0	SMALL OUTLINE, SHRINK PITCH		5.5 ns			.635 mm	85 Cel	3-STATE	.06 ns	0 Cel	MATTE TIN	1	DUAL	220 MHz	R-PDSO-G16		2.7 V	1.75 mm	3.9 mm	Not Qualified	2.3 V		e3			4.9 mm	95V
ICS842AFILF-T	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		2.5		0	SMALL OUTLINE, SHRINK PITCH		5.5 ns			.635 mm	85 Cel	3-STATE	.06 ns	0 Cel	MATTE TIN	1	DUAL	220 MHz	R-PDSO-G16		2.7 V	1.75 mm	3.9 mm	Not Qualified	2.3 V		e3			4.9 mm	95V
ICS842AF	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		2.5		0	SMALL OUTLINE, SHRINK PITCH		5.5 ns			.635 mm	85 Cel	3-STATE	.06 ns	0 Cel	TIN LEAD	1	DUAL	220 MHz	R-PDSO-G16		2.7 V	1.75 mm	3.9 mm	Not Qualified	2.3 V		e0			4.9 mm	95V
ICS842AFLF	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		2.5		0	SMALL OUTLINE, SHRINK PITCH		5.5 ns			.635 mm	85 Cel	3-STATE	.06 ns	0 Cel	MATTE TIN	1	DUAL	220 MHz	R-PDSO-G16		2.7 V	1.75 mm	3.9 mm	Not Qualified	2.3 V		e3			4.9 mm	95V
ICS83210AYT	Renesas Electronics	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	32	HTQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		1.5		0	FLATPACK, HEAT SINK/SLUG, THIN PROFILE		5.5 ns			.8 mm	85 Cel	3-STATE	.11 ns	0 Cel	TIN LEAD	10	QUAD	150 MHz	S-PQFP-G32		1.62 V	1.2 mm	7 mm	Not Qualified	1.38 V		e0			7 mm	83210
ICS842AF-T	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		2.5		0	SMALL OUTLINE, SHRINK PITCH		5.5 ns			.635 mm	85 Cel	3-STATE	.06 ns	0 Cel	TIN LEAD	1	DUAL	220 MHz	R-PDSO-G16		2.7 V	1.75 mm	3.9 mm	Not Qualified	2.3 V		e0			4.9 mm	95V
ICS842AFLF-T	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		2.5		0	SMALL OUTLINE, SHRINK PITCH		5.5 ns			.635 mm	85 Cel	3-STATE	.06 ns	0 Cel	MATTE TIN	1	DUAL	220 MHz	R-PDSO-G16		2.7 V	1.75 mm	3.9 mm	Not Qualified	2.3 V		e3			4.9 mm	95V
ICS83210AY	Renesas Electronics	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	32	HTQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		1.5		0	FLATPACK, HEAT SINK/SLUG, THIN PROFILE		5.5 ns			.8 mm	85 Cel	3-STATE	.11 ns	0 Cel	TIN LEAD	10	QUAD	150 MHz	S-PQFP-G32		1.62 V	1.2 mm	7 mm	Not Qualified	1.38 V		e0			7 mm	83210
ICS8537AY-01	Renesas Electronics	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	6		3.3		0	FLATPACK, LOW PROFILE, FINE PITCH		1.5 ns			.5 mm	85 Cel		.13 ns	0 Cel	TIN LEAD	2	QUAD		S-PQFP-G48		3.465 V	1.6 mm	7 mm	Not Qualified	2.375 V		e0			7 mm	8537
ICS8537AY-01T	Renesas Electronics	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	6		3.3		0	FLATPACK, LOW PROFILE, FINE PITCH		1.5 ns			.5 mm	85 Cel		.13 ns	0 Cel	TIN LEAD	2	QUAD		S-PQFP-G48		3.465 V	1.6 mm	7 mm	Not Qualified	2.375 V		e0			7 mm	8537

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.