INDUSTRIAL Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
LMK00334RTVR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1					TR	3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		1 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE		-40 Cel	MATTE TIN	8	QUAD		400 MHz	S-XQCC-N32	3	3.45 V	.8 mm	5 mm	Not Qualified		3.15 V			e3	30	260	5 mm	00334
LMK00804BPWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1						3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.3 ns			.65 mm	85 Cel	3-STATE	.035 ns	-40 Cel	MATTE TIN	4	DUAL		350 MHz	R-PDSO-G16	1	3.465 V	1.2 mm	4.4 mm			3.135 V			e3	30	260	5 mm	00804
5PB1102PGGI8	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1					TR	1.8		5 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	2.9 ns	12 Amp		.65 mm	85 Cel		.05 ns	-40 Cel	Tin (Sn)	2	DUAL			R-PDSO-G8	1	3.465 V	1.2 mm	3 mm			1.71 V	13 mA	IT CAN ALSO OPERATE WITH 2.5 V AND 3.3 V POWER SUPPLY	e3	NOT SPECIFIED	260	4.4 mm	5PB11
CDCLVC1103PWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			TR	2.5	3.3		0	SMALL OUTLINE	TSSOP8,.25	2.6 ns	12 Amp	Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		250 MHz	R-PDSO-G8	1	2.7 V	1.2 mm	4.4 mm	Not Qualified		2.3 V			e4	30	260	3 mm	CDC
SI53322-B-GMR	Silicon Labs		INDUSTRIAL	NO LEAD	16	QCCN	SQUARE	PLASTIC/EPOXY	YES				CMOS					2.5/3.3			CHIP CARRIER	LCC16,.12SQ,20		1 Amp	Clock Drivers	.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD			S-PQCC-N16	2				Not Qualified					e3	40	260
LMK00306SQE/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1					TR	3.3	2.5/3.3,3.3	5 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	2.7 ns		Clock Drivers	.5 mm	85 Cel	3-STATE	.05 ns	-40 Cel	MATTE TIN	6	QUAD		3100 MHz	S-XQCC-N36	3	3.45 V	.8 mm	6 mm	Not Qualified		3.15 V	13.5 mA		e3	30	260	6 mm	00306
CDC208DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2		CMOS		4	TUBE	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	30	260	12.8 mm	208
CDCM61004RHBR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	MUX	1					TR	3.3		5 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel		.06 ns	-40 Cel	NICKEL PALLADIUM GOLD SILVER	4	QUAD		683.264 MHz	S-PQCC-N32	2	3.6 V	1 mm	5 mm	Not Qualified		3 V			e4	30	260	5 mm	61004
HMC6832ALP5LETR	Analog Devices	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1					TR	2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel			-40 Cel		16	QUAD			S-XQCC-N28	3	2.625 V	1 mm	5 mm			2.375 V		IT CAN ALSO OPERATE AT 3.3V NOMINAL		30	260	5 mm	6832
NB6L14MNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1						2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.35 ns		Clock Drivers	.5 mm	85 Cel		.15 ns	-40 Cel	NICKEL GOLD PALLADIUM	4	QUAD			S-XQCC-N16	1	3.63 V	1 mm	3 mm	Not Qualified		2.375 V		IT ALSO OPERATES WITH 3.3V SUPPLY		30	260	3 mm	6L
SI5330L-B00230-GMR	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1						1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4 ns			.5 mm	85 Cel		.1 ns	-40 Cel		4	QUAD			S-XQCC-N24	3	1.98 V	.9 mm	4 mm			1.71 V				40	260	4 mm	5330
ICS542MILF	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	156000000 Hz	CMOS				3.3	3.3/5		0	SMALL OUTLINE	SOP8,.25	15 ns		Prescaler/Multivibrators	1.27 mm	85 Cel	3-STATE	.5 ns	-40 Cel	Matte Tin (Sn) - annealed	2	DUAL			R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified		3 V			e3	30	260	4.9 mm	542
CDCLVP1102RGTT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					TR	2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.43 ns		Clock Drivers	.5 mm	85 Cel	OPEN-EMITTER	.01 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	QUAD		2000 MHz	S-PQCC-N16	2	2.625 V	1 mm	3 mm	Not Qualified		2.375 V	33 mA	DUMMY VAL	e4	30	260	3 mm	CDC
HMC6832ALP5LE	Analog Devices	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1						2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel			-40 Cel		16	QUAD			S-XQCC-N28	3	2.625 V	1 mm	5 mm			2.375 V		IT CAN ALSO OPERATE AT 3.3V NOMINAL		30	260	5 mm	6832
5PB1102PGGI	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1					TUBE	1.8		5 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	2.9 ns	12 Amp		.65 mm	85 Cel		.05 ns	-40 Cel	Matte Tin (Sn) - annealed	2	DUAL			R-PDSO-G8	1	3.465 V	1.2 mm	3 mm			1.71 V	13 mA	IT CAN ALSO OPERATE WITH 2.5 V AND 3.3 V POWER SUPPLY	e3	30	260	4.4 mm	5PB11
SI5330L-B00230-GM	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1						1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4 ns			.5 mm	85 Cel		.1 ns	-40 Cel		4	QUAD			S-XQCC-N24	3	1.98 V	.9 mm	4 mm			1.71 V				40	260	4 mm	5330
SY58011UMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1					TUBE	2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.25 ns			.5 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	QUAD		8000 MHz	S-XQCC-N16	2	3.6 V	.95 mm	3 mm	Not Qualified		2.375 V		CAN ALSO OPERATE WITH 3.3V SUPPLY	e4			3 mm	58011
SY89835UMG-TR	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	RECTANGULAR	UNSPECIFIED	YES	DIFFERENTIAL	1					TR	2.5			0	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE		.5 ns			.5 mm	85 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL		2000 MHz	R-XDSO-N8	1	2.625 V	.9 mm	2 mm	Not Qualified		2.375 V			e4	40	260	2 mm	89835
SY89832UMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1					TUBE	2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.57 ns			.5 mm	85 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	QUAD		2500 MHz	S-XQCC-N16	2	2.625 V	.95 mm	3 mm	Not Qualified		2.375 V			e4	40	260	3 mm	89832
PI6C10804WE	Diodes Incorporated	CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1						1.8	1.8/2.5		0	SMALL OUTLINE	SOP8,.25	3 ns	8 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.07 ns	-40 Cel	MATTE TIN	4	DUAL		250 MHz	R-PDSO-G8	1	1.95 V	1.75 mm	3.885 mm	Not Qualified		1.65 V		ALSO OPERATES AT 2.5V SUPPLY	e3	30	260	4.9 mm	6C
ICS85411AMILF	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1						3.3	3.3		0	SMALL OUTLINE	SOP8,.25	2.5 ns		Clock Drivers	1.27 mm	85 Cel		.025 ns	-40 Cel	Matte Tin (Sn) - annealed	2	DUAL			R-PDSO-G8	1	3.63 V	1.75 mm	3.9 mm	Not Qualified		2.97 V			e3	30	260	4.9 mm	85411
LMK00334RTVRQ1	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			AEC-Q100			3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	105 Cel	3-STATE		-40 Cel	MATTE TIN	8	QUAD		400 MHz	S-PQCC-N32	3	3.45 V	.8 mm	5 mm			3.15 V			e3	30	260	5 mm	00334
SN65EPT21DGKR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			TR	3.3		20 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		1.9 ns	24 Amp		.65 mm	85 Cel		.25 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		300 MHz	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified		3 V			e4	30	260	3 mm	65EP
SY58012UMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1					TUBE	2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.26 ns			.5 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	QUAD		5000 MHz	S-XQCC-N16	2	2.625 V	.95 mm	3 mm	Not Qualified		2.375 V	80 mA	SEATED HT-CALCULATED; ALSO OPERATES AT 3.3V SUPPLY	e4			3 mm	58012
74FCT38072SCMGI	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		CMOS				1.8			0	SMALL OUTLINE, VERY THIN PROFILE		4.5 ns			.5 mm	105 Cel		.065 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-N8	1	3.465 V	.55 mm	2 mm			1.71 V			e4		260	2 mm	FCT
CY2304NZZXI-1T	Infineon Technologies	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1						3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	5 ns	24 Amp	Clock Drivers	.65 mm	85 Cel		.1 ns	-40 Cel	MATTE TIN	4	DUAL		140 MHz	R-PDSO-G8	3	3.6 V	1.2 mm	3 mm	Not Qualified		3 V			e3	20	260	4.4 mm	2304
ICS570BILF	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS				3.3	3.3		0	SMALL OUTLINE	SOP8,.25		12 Amp	Clock Drivers	1.27 mm	85 Cel		.175 ns	-40 Cel	Matte Tin (Sn) - annealed	2	DUAL		168 MHz	R-PDSO-G8	1	3.45 V	1.75 mm	3.9 mm	Not Qualified		3.15 V			e3	30	260	4.9 mm	570
NB2305AI1DR2G	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS				3.3	3.3		0	SMALL OUTLINE	SOP8,.25		12 Amp	Clock Drivers	1.27 mm	85 Cel		.25 ns	-40 Cel	MATTE TIN	4	DUAL		133.33 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e3	30	260	4.9 mm	2305
NB6L16DG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL				2.5			0	SMALL OUTLINE		.18 ns			1.27 mm	85 Cel		.06 ns	-40 Cel	MATTE TIN	1	DUAL			R-PDSO-G8	1	3.465 V	1.75 mm	3.9 mm	Not Qualified		2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e3	30	260	4.9 mm	6L
874001AGI-05LF	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1					TUBE	3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25				.65 mm	85 Cel	3-STATE		-40 Cel	TIN	2	DUAL		640 MHz	R-PDSO-G20	1	3.6 V	1.2 mm	4.4 mm			3 V	75 mA		e3		260	6.5 mm	874001
CDCUN1208LPRHBT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1					TR	1.8	1.8/3.3	8 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		12 Amp	Clock Driver	.5 mm	85 Cel	3-STATE	.13 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	16	QUAD		400 MHz	S-PQCC-N32	2	1.9 V	1 mm	5 mm	Not Qualified		1.7 V		ALSO OPERATES IN 2.5V AND 3.3V SUPPLY	e4	NOT SPECIFIED	260	5 mm	CDC
ICS551MILFT	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS				3.3	3.3/5		0	SMALL OUTLINE	SOP8,.25	8 ns	35 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.25 ns	-40 Cel	Matte Tin (Sn) - annealed	4	DUAL		160 MHz	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified		3 V			e3	30	260	4.9 mm	551
SI53154-A01AGMR	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1						3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		1 Amp	Clock Drivers	.5 mm	85 Cel			-40 Cel		8	QUAD			S-XQCC-N24		3.465 V	.8 mm	4 mm	Not Qualified		3.135 V						4 mm	53154
SY58021UMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1					TUBE	2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.3 ns			.5 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	QUAD		4000 MHz	S-XQCC-N16	2	2.625 V	.9 mm	3 mm	Not Qualified		2.375 V	160 mA	IT ALSO OPERATE ON 3.3V SUPPLY	e4			3 mm	58021
SY58032UMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1					TUBE	2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.33 ns			.5 mm	85 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	QUAD		4000 MHz	S-XQCC-N32	2	2.625 V	.95 mm	5 mm	Not Qualified		2.375 V		CAN ALSO OPERATE WITH 3.3V SUPPLY	e4		260	5 mm	58032
8304AMILFT	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1						3.3	3.3		0	SMALL OUTLINE	SOP8,.25	3.7 ns	16 Amp	Clock Drivers	1.27 mm	85 Cel		.06 ns	-40 Cel	MATTE TIN	4	DUAL			R-PDSO-G8	1	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V			e3	30	260	4.9 mm	8304
854S054AGILFT	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1						3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	.7 ns		Clock Drivers	.65 mm	85 Cel			-40 Cel	Matte Tin (Sn)	2	DUAL		2500 MHz	R-PDSO-G16	1	3.465 V	1.2 mm	4.4 mm	Not Qualified		3.135 V			e3	NOT SPECIFIED	260	5 mm	854S
MC100EP210SFAG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		ECL				2.5	2.5		0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.65 ns		Clock Drivers	.8 mm	85 Cel		.025 ns	-40 Cel	MATTE TIN	5	QUAD			S-PQFP-G32	2	2.625 V	1.6 mm	7 mm	Not Qualified		2.375 V			e3	30	260	7 mm	100E
854S054AGILF	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1					TUBE	3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	.7 ns		Clock Drivers	.65 mm	85 Cel			-40 Cel	Matte Tin (Sn)	2	DUAL		2500 MHz	R-PDSO-G16	1	3.465 V	1.2 mm	4.4 mm	Not Qualified		3.135 V			e3	NOT SPECIFIED	260	5 mm	854S
LMK01000ISQE/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1					TR	3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		.5 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel	MATTE TIN	8	QUAD		1600 MHz	S-XQCC-N48	3	3.45 V	.8 mm	7 mm	Not Qualified		3.15 V			e3	30	260	7 mm	01000
SY58605UMG-TR	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					TR	2.5			0	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.42 ns			.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		2000 MHz	S-PDSO-N8	1	2.625 V	.9 mm	2 mm	Not Qualified		2.375 V	50 mA		e4			2 mm	58605
SY89833ALMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1					TUBE	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.47 ns			.5 mm	85 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	QUAD		2000 MHz	S-XQCC-N16	2	3.6 V	.95 mm	3 mm	Not Qualified		3 V			e4	40	260	3 mm	89833
SY89874UMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1					TUBE	2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.79 ns			.5 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	QUAD		2500 MHz	S-XQCC-N16	2	2.625 V	.95 mm	3 mm	Not Qualified		2.375 V		CAN ALSO OPERATE WITH 3.3V SUPPLY	e4			3 mm	89874
CDCM61001RHBT	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	MUX	1					TR	3.3		5 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				Clock Driver	.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	QUAD		683.28 MHz	S-PQCC-N32	2	3.6 V	1 mm	5 mm	Not Qualified		3 V			e4	30	260	5 mm	61001
LMK1D1204RGTR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					TR	1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.575 ns			.5 mm	105 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	QUAD		2000 MHz	S-PQCC-N16	1	1.89 V	1 mm	3 mm			1.71 V	72 mA		e4		260	3 mm
CDCE18005RGZT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1					TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD SILVER	10	QUAD		1500 MHz	S-PQCC-N48	3	3.6 V	1 mm	7 mm	Not Qualified		3 V			e4	30	260	7 mm	CDC
LMK00338RTAR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1					TR	3.3	2.5/3.3,3.3	5 pF	0	CHIP CARRIER, HEAT SINK/SLUG	LCC40,.24SQ,20	2.7 ns		Clock Drivers	.5 mm	85 Cel	3-STATE	.05 ns	-40 Cel	MATTE TIN	16	QUAD		400 MHz	S-XQCC-N40	3	3.45 V	.8 mm	6 mm	Not Qualified		3.15 V			e3	30	260	6 mm	00338
CDCLVC1106PW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			TUBE	2.5	3.3		0	SMALL OUTLINE	TSSOP14,.25	2.6 ns	12 Amp	Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		250 MHz	R-PDSO-G14	1	2.7 V	1.2 mm	4.4 mm	Not Qualified		2.3 V			e4	30	260	5 mm	CDC

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.