INDUSTRIAL Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
I2040BF-08-TT	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	85 Cel			-40 Cel		1	DUAL	100 MHz	R-PDSO-G8		3.6 V	1.1 mm	3.9 mm	Not Qualified	3 V				40	250	4.4 mm	2040
NBSG14MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		ECL		2.5	-2.5/-3.3/2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.16 ns		Clock Drivers	.5 mm	85 Cel	SERIES-RESISTOR	.015 ns	-40 Cel	NICKEL GOLD PALLADIUM	4	QUAD	10500 MHz	S-XQCC-N16	1	3.465 V	1 mm	3 mm	Not Qualified	2.375 V		RSNECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V		30	260	3 mm	14
P2P2304NZF-08ST	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel		.1 ns	-40 Cel		4	DUAL		R-PDSO-G8		3.6 V	1.75 mm	3.9 mm		3 V						4.9 mm	2304
ASM5I2308AF-2-16-SR	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1				3.3			0	SMALL OUTLINE					1.27 mm	85 Cel	3-STATE		-40 Cel		8	DUAL	133 MHz	R-PDSO-G16		3.6 V	1.75 mm	3.9 mm		3 V						9.9 mm	2308
NB2305AI1HDTR2G	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25		12 Amp	Clock Drivers	.65 mm	85 Cel		.25 ns	-40 Cel	MATTE TIN	4	DUAL	133.33 MHz	S-PDSO-G8	3	3.6 V	1.2 mm	3 mm	Not Qualified	3 V			e3	30	260	4.4 mm	2305
NB100LVEP221FAR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		2.5	-2.5/-3.3/2.5/3.3		0	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	.71 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel		20	QUAD		S-PQFP-G52	2	3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V				10 mm	100LVE
PCS3P623Z09AG-16-TR	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1			TR	3.3		30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	.35 ns	8 Amp		.65 mm	85 Cel	3-STATE	.7 ns	-40 Cel		8	DUAL	50 MHz	R-PDSO-G16		3.6 V	1.1 mm	4.4 mm		3 V	27 mA					5 mm	PCS3
NB2308AI1DR2	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3		0	SMALL OUTLINE	SOP16,.25		8 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.2 ns	-40 Cel	TIN LEAD	8	DUAL	133.3 MHz	R-PDSO-G16		3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e0		235	9.9 mm	2308
PCS3I623Z05BG-08-TT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1			TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	.35 ns	8 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL	50 MHz	R-PDSO-G8	1	3.6 V	1.2 mm	3 mm	Not Qualified	3 V	27 mA			40	260	4.4 mm	PCS3
NB7V33MMNHTBG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	10000000000 Hz			1.8	1.8/2.5		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.7 ns		Prescaler/Multivibrators	.5 mm	85 Cel		.05 ns	-40 Cel	NICKEL GOLD PALLADIUM	1	QUAD		S-XQCC-N16	1	2.625 V	1 mm	3 mm	Not Qualified	1.71 V	115 mA	IT ALSO OPERATES AT 2.5V SUPPLY		30	260	3 mm	7V
PCS3I622Z09CG-16-ST	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1			TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE	SOP16,.25		8 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.25 ns	-40 Cel		8	DUAL	20 MHz	R-PDSO-G16		3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V	18 mA					9.9 mm	PCS3
NB2308AI5HDTG	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.2 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL	15 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	5 mm	2308
ASM3P623S00BF-08-SR	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3			0	SMALL OUTLINE		.35 ns			1.27 mm	85 Cel		.25 ns	-40 Cel		1	DUAL	50 MHz	R-PDSO-G8		3.6 V	1.75 mm	3.91 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	4.9 mm	3P
SB3N551DG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE		6 ns			1.27 mm	85 Cel	3-STATE	.25 ns	-40 Cel	TIN	4	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm		3 V			e3	30	260	4.9 mm	SB3
NB3V8312CMNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1				1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4.2 ns			.5 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	MATTE TIN	12	QUAD	250 MHz	S-XQCC-N32	1	2 V	1 mm	5 mm		1.6 V		ALSO OPERATES AT 2.5V, 3.3V SUPPLY VOLTAGE	e3	30	260	5 mm	NB3V
NB2308AI5HDG	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3		0	SMALL OUTLINE	SOP16,.25		12 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.2 ns	-40 Cel	TIN	8	DUAL	15 MHz	R-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e3	30	260	9.9 mm	2308
NB6L14MMNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.48 ns		Clock Drivers	.5 mm	85 Cel		.08 ns	-40 Cel	NICKEL GOLD PALLADIUM	4	QUAD		S-PQCC-N16	1	3.63 V	1 mm	3 mm	Not Qualified	2.375 V		IT ALSO OPERATES WITH 3.3V SUPPLY		30	260	3 mm	6L
MC10EL11DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		5	-5.2		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.34 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN	2	DUAL		S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e3	30	260	3 mm	10EL
P2I2304NZF-08-TR	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		5 ns			.65 mm	85 Cel		.15 ns	-40 Cel	TIN	4	DUAL		R-PDSO-G8	1	3.6 V	1.2 mm	3 mm		3 V			e3	30	260	4.4 mm	2304
MC100E111FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		5	-4.5		0	CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel	3-STATE	.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 V WITH VEE = -4.2 V TO -5.7 V	e3	30	260	11.505 mm	100E
NB4L7210MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	VQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				2.5	2.5/3.3		0	CHIP CARRIER, VERY THIN PROFILE	LCC52,.31SQ,20	20 ns	1 Amp	Clock Drivers	.5 mm	85 Cel		.2 ns	-40 Cel	TIN	10	QUAD		S-XQCC-N52	2	3.6 V	1 mm	8 mm	Not Qualified	2.375 V			e3	30	260	8 mm	4L
MC10LVEP11DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		2.5	+-2.375/+-3.8		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.31 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	2	DUAL		S-PDSO-G8	1	3.8 V	1.1 mm	3 mm	Not Qualified	2.375 V		NECL MODE : VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	3 mm	10LVE
NB3L208KMNTXG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.4 ns			.5 mm	85 Cel	3-STATE	.1 ns	-40 Cel	MATTE TIN	16	QUAD		S-XQCC-N32	1	2.625 V	1 mm	5 mm		2.375 V		ALSO OPERATES AT 2.97 TO 3.63	e3	30	260	5 mm	NB3
MC100EL39DWR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	1000000000 Hz	ECL		5	+-5		0	SMALL OUTLINE	SOP20,.4	1.2 ns		Prescaler/Multivibrators	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN	4	DUAL	1000 MHz	R-PDSO-G20	3	5.7 V	2.65 mm	7.5 mm	Not Qualified	4.2 V	61 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	12.8 mm	100EL
NB4L7210MNTXG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	VQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				2.5	2.5/3.3		0	CHIP CARRIER, VERY THIN PROFILE	LCC52,.31SQ,20	20 ns	1 Amp	Clock Drivers	.5 mm	85 Cel		.2 ns	-40 Cel	TIN	10	QUAD		S-XQCC-N52	2	3.6 V	1 mm	8 mm	Not Qualified	2.375 V			e3	30	260	8 mm	4L
NB3L14SMNTXG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.6 ns			.5 mm	85 Cel		.02 ns	-40 Cel	TIN	8	QUAD	300 MHz	S-XQCC-N16	1	2.625 V	1 mm	3 mm		2.375 V			e3			3 mm	3L
NB6L239MNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		ECL		2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.57 ns		Clock Drivers	.5 mm	85 Cel		.03 ns	-40 Cel	NICKEL GOLD PALLADIUM	2	QUAD	3000 MHz	S-XQCC-N16	1	3.465 V	1 mm	3 mm	Not Qualified	2.375 V				30	260	3 mm	6L
MC100EL11MNR4	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSSON	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		ECL		5	-4.5		0	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH	SOLCC8,.08,20	.34 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	2	DUAL		S-XDSO-N8		5.7 V	1 mm	2 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e0			2 mm	100EL
MC100EL13DWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		ECL		5	-4.5		0	SMALL OUTLINE	SOP20,.4	.62 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	-40 Cel	TIN	3	DUAL		R-PDSO-G20	3	5.7 V	2.65 mm	7.5 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	12.8 mm	100EL
MC100EP11DG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		3.3	-3.0/-5.5		0	SMALL OUTLINE	SOP8,.25	.3 ns		Clock Drivers	1.27 mm	85 Cel		.12 ns	-40 Cel	MATTE TIN	2	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	3 V		NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V	e3	30	260	4.9 mm	10EP
NB6L14SMNTXG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				2.5	2.5		0	CHIP CARRIER	LCC16,.12SQ,20	.6 ns		Clock Drivers	.5 mm	85 Cel		.2 ns	-40 Cel	NICKEL GOLD PALLADIUM	4	QUAD		S-XQCC-N16	1	2.625 V	1 mm	3 mm	Not Qualified	2.375 V				30	260	3 mm	6L
NB3L8533DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				2.5	2.5/3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	1.55 ns		Clock Drivers	.65 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		R-PDSO-G20	1	3.63 V	1.2 mm	4.4 mm	Not Qualified	2.375 V			e4	30	260	6.5 mm	NB3
MC100LVE222FAR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		3.3	-3.3/-5		0	FLATPACK, LOW PROFILE	QFP52,.47SQ	1.33 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	15	QUAD	1500 MHz	S-PQFP-G52		3.8 V	1.7 mm	10 mm	Not Qualified	3 V		NECL MODE: VCC=0V WITH VEE = -3V TO -3.8V	e0		235	10 mm	100LVE
MC100LVEL38DWR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		3.3	-3.3		0	SMALL OUTLINE	SOP20,.25	1.05 ns	100 Amp	Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	-40 Cel	TIN LEAD	4	DUAL	1000 MHz	R-PDSO-G20		3.8 V	2.65 mm	7.5 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0		235	12.8 mm	100LVEL
MC10EL15DG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		5	-5.2		0	SMALL OUTLINE	SOP16,.25	.72 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.05 ns	-40 Cel	TIN	4	DUAL		R-PDSO-G16	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 WITH VEE = -4.2 TO -5.7V SUPPLY	e3	30	260	9.9 mm	10EL
MC100LVEL11DTR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	TR	3.3	-3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.405 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	MATTE TIN	2	DUAL	1000 MHz	S-PDSO-G8	3	3.8 V	1.1 mm	3 mm	Not Qualified	3 V		NECL MODE: 0V VCC WITH VEE = -3V TO -3.8V	e3	30	260	3 mm	100LVEL
MC100LVEP111FA	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		2.5	-4.5		0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.5 ns		Clock Drivers	.8 mm	85 Cel	OPEN-EMITTER	.025 ns	-40 Cel	TIN LEAD	10	QUAD		S-PQFP-G32		3.8 V	1.6 mm	7 mm	Not Qualified	2.375 V		NECL MODE OPERATING RANGE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	7 mm	100LVE
MC10EP139DWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE	SOP20,.4	.9 ns		Clock Drivers	1.27 mm	85 Cel		.1 ns	-40 Cel	TIN	4	DUAL		R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	12.8 mm	10E
MC100E310FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		5	+-5		0	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN	8	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: 0V VCC WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC100LVEP111MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1		ECL		2.5	+-2.375/+-3.8		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.5 ns		Clock Drivers	.5 mm	85 Cel		.025 ns	-40 Cel	MATTE TIN	10	QUAD		S-XQCC-N32	1	3.8 V	1 mm	5 mm	Not Qualified	2.375 V		NECL MODE OPERATING RANGE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	5 mm	100LVE
MC100EP11DR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		3.3	-3.0/-5.5		0	SMALL OUTLINE	SOP8,.25	.3 ns		Clock Drivers	1.27 mm	85 Cel		.12 ns	-40 Cel	MATTE TIN	2	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	3 V		NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V	e3	30	260	4.9 mm	10EP
MC100LVEL37DW	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		3.3	-3.3		0	SMALL OUTLINE	SOP20,.4	.94 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	Tin/Lead (Sn80Pb20)	4	DUAL		R-PDSO-G20		3.8 V	2.65 mm	7.5 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE= -3V TO -3.8V	e0	30	235	12.8 mm	100LVEL
MC100EL11DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		5	-4.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.34 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN	2	DUAL		S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e3	30	260	3 mm	100EL
P2I2304NZF-08TT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		5 ns			.65 mm	85 Cel		.15 ns	-40 Cel		4	DUAL		R-PDSO-G8		3.6 V	1.2 mm	3 mm		3 V						4.4 mm	2304
MC10EP139DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.9 ns		Clock Drivers	.65 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL		R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4		260	6.5 mm	10E
MC100EP139DTR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL	TR	3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.9 ns		Clock Drivers	.65 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL		R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4	30	260	6.5 mm	100E
MC100LVE310FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		3.3	-3.3		0	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	8	QUAD		S-PQCC-J28	3	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	11.505 mm	100LVE
NB3L8504SDTR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	4			TR	2.5	2.5/3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	1.3 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL	700 MHz	R-PDSO-G16	1	2.5625 V	1.2 mm	4.4 mm	Not Qualified	2.4375 V	50 mA	IT ALSO OPERATE ON 3.3V SUPPLY	e4	30	260	5 mm	NB3

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.