OTHER Clock Drivers & Buffers 366

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
100315SC	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL			SMALL OUTLINE		1.02 ns			1.27 mm	85 Cel		.05 ns	0 Cel		8	DUAL	750 MHz	R-PDSO-G16			1.753 mm	3.899 mm							9.902 mm	100K
NBSG111BAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	49	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	2.5	-2.5/-3.3/2.5/3.3	GRID ARRAY, LOW PROFILE	BGA49,7X7,40	.35 ns		Clock Drivers	1 mm	70 Cel		.02 ns	-40 Cel	TIN LEAD	10	BOTTOM		S-PBGA-B49	3	3.465 V	1.4 mm	8 mm	Not Qualified	2.375 V	NECL OPERATING RANGE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V	e0			8 mm	111
NB100EP223FA	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	3.3	1.8,3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	1.2 ns		Clock Drivers	.5 mm	85 Cel		.065 ns	0 Cel	TIN LEAD	22	QUAD		S-PQFP-G64	2	3.6 V	1.6 mm	10 mm	Not Qualified	3 V		e0		235	10 mm	100E
NB3N3010BDG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		SMALL OUTLINE					1.27 mm	85 Cel		.7 ns	0 Cel	TIN	2	DUAL	12.3187 MHz	R-PDSO-G8	1	3.465 V	1.75 mm	3.9 mm	Not Qualified	3.135 V		e3	30	260	4.9 mm	3N
NB100LVEP224FA	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	2.5	-2.5/-3.3/2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	.75 ns		Clock Drivers	.5 mm	85 Cel		.04 ns	0 Cel	Tin/Lead (Sn80Pb20)	24	QUAD		S-PQFP-G64		3.8 V	1.6 mm	10 mm	Not Qualified	2.375 V	NECL MODE: VCC=0 WITH VEE = -2.375V TO -3.8V	e0	30	235	10 mm	100LVE
NB100LVEP224FAG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	2.5	-2.5/-3.3/2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	.75 ns		Clock Drivers	.5 mm	85 Cel		.04 ns	0 Cel	TIN	24	QUAD		S-PQFP-G64	3	3.8 V	1.6 mm	10 mm	Not Qualified	2.375 V	NECL MODE: VCC=0 WITH VEE = -2.375V TO -3.8V	e3		260	10 mm	100LVE
NB100LVEP224FAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	2.5	-2.5/-3.3/2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	.75 ns		Clock Drivers	.5 mm	85 Cel		.04 ns	0 Cel	TIN LEAD	24	QUAD		S-PQFP-G64		3.8 V	1.6 mm	10 mm	Not Qualified	2.375 V	NECL MODE: VCC=0 WITH VEE = -2.375V TO -3.8V	e0		235	10 mm	100LVE
NBSG11BAR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		2.5		GRID ARRAY, LOW PROFILE		.16 ns			1 mm	70 Cel		.015 ns	-40 Cel		2	BOTTOM	10709 MHz	S-PBGA-B16		3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V		NOT SPECIFIED	NOT SPECIFIED	4 mm	11
100315SCX	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL			SMALL OUTLINE		1.02 ns			1.27 mm	85 Cel		.05 ns	0 Cel		8	DUAL	750 MHz	R-PDSO-G16			1.753 mm	3.899 mm							9.902 mm	100K
NBSG53ABAHTBG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		2.5	+-2.5/+-3.3	GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.275 ns		Clock Drivers	1 mm	70 Cel			-40 Cel		1	BOTTOM		S-PBGA-B16		3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V				4 mm	53
NB100LVEP224FAR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	2.5	-2.5/-3.3/2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	.75 ns		Clock Drivers	.5 mm	85 Cel		.04 ns	0 Cel		24	QUAD		S-PQFP-G64	2	3.8 V	1.6 mm	10 mm	Not Qualified	2.375 V	NECL MODE: VCC=0 WITH VEE = -2.375V TO -3.8V				10 mm	100LVE
NBSG111BAHTBG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	49	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	2.5	-2.5/-3.3/2.5/3.3	GRID ARRAY, LOW PROFILE	BGA49,7X7,40	.35 ns		Clock Drivers	1 mm	70 Cel		.02 ns	-40 Cel		10	BOTTOM		S-PBGA-B49		3.465 V	1.4 mm	8 mm	Not Qualified	2.375 V	NECL OPERATING RANGE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V				8 mm	111
NBSG14MAT1BG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BUTT	16	TBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL	2.5	-2.5/-3.3/2.5/3.3	GRID ARRAY, THIN PROFILE	LGA16,4X4,40	.15 ns		Clock Drivers	1 mm	70 Cel	SERIES-RESISTOR	.015 ns	-40 Cel		4	BOTTOM	10700 MHz	S-PBGA-BU16		3.465 V	1.03 mm	4 mm	Not Qualified	2.375 V	RSNECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V				4 mm	14
NBSG14BAR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		2.5		GRID ARRAY, LOW PROFILE		.15 ns			1 mm	70 Cel	SERIES-RESISTOR	.015 ns	-40 Cel		4	BOTTOM	10700 MHz	S-PBGA-B16		3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V	RSNECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V		NOT SPECIFIED	NOT SPECIFIED	4 mm	14
MC100E221FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5		CHIP CARRIER		1.125 ns			1.27 mm	85 Cel		.075 ns	0 Cel	TIN LEAD	6	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V	NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e0			11.505 mm	100E
MC10H641FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN LEAD	9	QUAD	65 MHz	S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e0		235	11.505 mm	10H
MC10E211FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	1.125 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	0 Cel	TIN	6	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V	NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC100H642FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	5.75 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN LEAD	8	QUAD	100 MHz	S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e0		235	11.505 mm	100H
MC100H642FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	5.75 ns		Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD	100 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e3		260	11.505 mm	100H
MC10E221FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5		CHIP CARRIER		1.125 ns			1.27 mm	85 Cel		.075 ns	0 Cel	TIN LEAD	6	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V	NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e0			11.505 mm	10E
MC100H646FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e3		260	11.505 mm	100H
MC10E411FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	0 Cel	TIN	9	QUAD		S-PQCC-J28		5.5 V	4.57 mm	11.505 mm	Not Qualified	4.5 V	NECL MODE: VCC = 0V WITH VEE = -4.5V TO -5.5V	e3		260	11.505 mm	10E
MC10H641FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN LEAD	9	QUAD	65 MHz	S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e0		235	11.505 mm	10H
MC100H645FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5		CHIP CARRIER		6.2 ns			1.27 mm	85 Cel		1 ns	0 Cel	TIN LEAD	9	QUAD		S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e0			11.505 mm	100H
MC10H640FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	6	QUAD	135 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e3		260	11.505 mm	10H
MC100E211FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	-4.5	CHIP CARRIER	LDCC28,.5SQ	1.125 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	0 Cel	TIN LEAD	6	QUAD		S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V	NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC100E210FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL	5	-4.5	CHIP CARRIER	LDCC28,.5SQ	.75 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	0 Cel	TIN LEAD	4	QUAD		S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC100E211FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	-4.5	CHIP CARRIER	LDCC28,.5SQ	1.125 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	0 Cel	TIN	6	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V	NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC100E210FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL	5	-4.5	CHIP CARRIER	LDCC28,.5SQ	.75 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	0 Cel	TIN	4	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC10H640FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	6	QUAD	135 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e3		260	11.505 mm	10H
MC10H645FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	5.8 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.65 ns	0 Cel	TIN	9	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e3		260	11.505 mm	10H
MC10E411FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	0 Cel	TIN	9	QUAD		S-PQCC-J28		5.5 V	4.57 mm	11.505 mm	Not Qualified	4.5 V	NECL MODE: VCC = 0V WITH VEE = -4.5V TO -5.5V	e3		260	11.505 mm	10E
MC100H646FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e0		235	11.505 mm	100H
MC10E411FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	0 Cel	TIN LEAD	9	QUAD		S-PQCC-J28		5.5 V	4.57 mm	11.505 mm	Not Qualified	4.5 V	NECL MODE: VCC = 0V WITH VEE = -4.5V TO -5.5V	e0		235	11.505 mm	10E
MC10H644FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6.7 ns		Clock Drivers	1.27 mm	85 Cel		1.5 ns	0 Cel	TIN LEAD	4	QUAD	135 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.965 mm	Not Qualified	4.75 V		e0		235	8.965 mm	10H
MC100H641FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e3		260	11.505 mm	100H
MC100E211FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	-4.5	CHIP CARRIER	LDCC28,.5SQ	1.125 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	0 Cel	TIN	6	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V	NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC100H646FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e0		235	11.505 mm	100H
MC10E211FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	1.125 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	0 Cel	TIN LEAD	6	QUAD		S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V	NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC10H640FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN LEAD	6	QUAD	135 MHz	S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e0		235	11.505 mm	10H
MC10H646FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e3		260	11.505 mm	10H
MC10H644FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6.7 ns		Clock Drivers	1.27 mm	85 Cel		1.5 ns	0 Cel	TIN LEAD	4	QUAD	135 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.965 mm	Not Qualified	4.75 V		e0		235	8.965 mm	10H
MC100H644FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	5	CHIP CARRIER	LDCC20,.4SQ	6.7 ns		Clock Drivers	1.27 mm	85 Cel		1.5 ns	0 Cel	Tin/Lead (Sn80Pb20)	4	QUAD	135 MHz	S-PQCC-J20	1	5.25 V	4.57 mm	8.965 mm	Not Qualified	4.75 V		e0			8.965 mm	100H
MC100H640FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN LEAD	6	QUAD	135 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e0		235	11.505 mm	100H
MC10E221FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5		CHIP CARRIER		1.125 ns			1.27 mm	85 Cel		.075 ns	0 Cel	TIN LEAD	6	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V	NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e0			11.505 mm	10E
MC100H641FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN LEAD	9	QUAD	65 MHz	S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e0		235	11.505 mm	100H
MC100H641FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e3		260	11.505 mm	100H
MC10H646FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	5	5	CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V		e0		235	11.505 mm	10H

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.