J BEND Clock Drivers & Buffers 185

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
PI6C9911E-5I	Diodes Incorporated		INDUSTRIAL	J BEND	32	QCCJ	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS	5	5		CHIP CARRIER	LDCC32,.5X.6		46 Amp	Clock Drivers	1.27 mm	85 Cel			-40 Cel	Tin/Lead (Sn/Pb)		QUAD		R-PQCC-J32					Not Qualified				e0
PI6C39911JEX	Diodes Incorporated	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	32	QCCJ	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	CHIP CARRIER		.7 ns			1.27 mm	70 Cel		1.7 ns	0 Cel	MATTE TIN	4	QUAD	133 MHz	R-PQCC-J32	1	3.6 V	3.556 mm	11.43 mm	Not Qualified	3 V			e3			13.97 mm	6C
DS21610QN/T&R	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	CHIP CARRIER		41 ns			1.27 mm	85 Cel			-40 Cel	TIN LEAD	2	QUAD	8.192 MHz	S-PQCC-J28	1	3.465 V	4.572 mm	11.5062 mm	Not Qualified	3.135 V		ALSO OPERATES AT 5V SUPPLY	e0			11.5062 mm	21610
DS21610QN	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	CHIP CARRIER		41 ns			1.27 mm	85 Cel			-40 Cel	TIN LEAD	2	QUAD	8.192 MHz	S-PQCC-J28	1	3.465 V	4.57 mm	11.505 mm	Not Qualified	3.135 V		ALSO OPERATES AT 5V SUPPLY	e0		245	11.505 mm	21610
MAX9325EQI	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR	3.3	+-2.375/+-3.8	0	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			11.505 mm	9325
MAX9326EQI+T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BIPOLAR	3.3	3.3	0	CHIP CARRIER	LDCC28,.5SQ	.685 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28		3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e3			11.505 mm
MAX9325EQI+T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR	3.3		0	CHIP CARRIER		.8 ns			1.27 mm	85 Cel		.05 ns	-40 Cel		8	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V				11.505 mm	9325
MAX9326EQI-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BIPOLAR	3.3	3.3	0	CHIP CARRIER	LDCC28,.5SQ	.685 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	9	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			11.505 mm
MAX9326EQI	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BIPOLAR	3.3	3.3	0	CHIP CARRIER	LDCC28,.5SQ	.685 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	9	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			11.505 mm
MAX9325EQI+	Maxim Integrated	CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR	3.3		0	CHIP CARRIER		.8 ns			1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	8	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e3	30	260	11.505 mm	9325
MAX9325EQI-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR	3.3	+-2.375/+-3.8	0	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			11.505 mm	9325
MAX9326EQI+	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BIPOLAR	3.3	3.3	0	CHIP CARRIER	LDCC28,.5SQ	.685 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e3	30	260	11.505 mm
IDT5V994JG	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	J BEND	32	QCCJ	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	CHIP CARRIER					1.27 mm	85 Cel		1.2 ns	-40 Cel	MATTE TIN	8	QUAD	133 MHz	R-PQCC-J32		3.6 V	3.55 mm	11.43 mm	Not Qualified	3 V			e3			13.97 mm
IDT54FCT388915T55J	Renesas Electronics		MILITARY	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS	3.3	3.3		CHIP CARRIER	LDCC28,.5SQ			Clock Drivers	1.27 mm	125 Cel			-55 Cel	TIN LEAD		QUAD		S-PQCC-J28	1				Not Qualified				e0	20	225
IDT5992A-2J8	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	32	QCCJ	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		5		0	CHIP CARRIER					1.27 mm	70 Cel		.25 ns	0 Cel	TIN LEAD	8	QUAD	100 MHz	R-PQCC-J32		5.25 V	3.55 mm	11.43 mm	Not Qualified	4.75 V			e0			13.97 mm
5V991A-7JG8	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	32	QCCJ	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	CHIP CARRIER						70 Cel		.75 ns	0 Cel		8	QUAD		R-PQCC-J32		3.6 V				3 V							5V
5V991A-5JG8	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	32	QCCJ	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	CHIP CARRIER						70 Cel		.5 ns	0 Cel		8	QUAD		R-PQCC-J32		3.6 V				3 V							5V
54FCT388915T55J	Renesas Electronics		MILITARY	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS	3.3	3.3		CHIP CARRIER	LDCC28,.5SQ			Clock Drivers	1.27 mm	125 Cel			-55 Cel	TIN LEAD		QUAD		S-PQCC-J28	1				Not Qualified				e0	20	225
74FCT388915TBJG	Renesas Electronics	PLL BASED CLOCK DRIVER		J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	SCHMITT TRIGGER MUX	1	CMOS	3.3		1	CHIP CARRIER	LDCC28,.5SQ	1.3 ns	32 Amp		1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	TIN	7	QUAD	70 MHz	S-PQCC-J28	3	3.6 V	4.572 mm	11.5 mm		3 V	120 mA		e3		260	11.5 mm	FCT
74FCT388915T70J	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	SCHMITT TRIGGER MUX	1	CMOS	3.3	3.3	1	CHIP CARRIER	LDCC28,.5SQ	1.3 ns	32 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	TIN LEAD	7	QUAD	70 MHz	S-PQCC-J28	1	3.6 V	4.572 mm	11.5062 mm	Not Qualified	3 V		OUTPUT FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F; MAX PART TO PART SKEW = 1NS	e0	20	225	11.5062 mm	FCT
IDTCSP5V991-5JRI	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	J BEND	32	QCCJ	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	CHIP CARRIER					1.27 mm	85 Cel		.7 ns	-40 Cel	TIN LEAD	8	QUAD	70 MHz	R-PQCC-J32		3.6 V	3.55 mm	11.43 mm	Not Qualified	3 V			e0			13.97 mm
9176Q-01	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	CMOS	5		0	CHIP CARRIER	LDCC28,.5SQ				1.27 mm	70 Cel		.25 ns	0 Cel		10	QUAD	120 MHz	S-PQCC-J28		5.25 V	4.4704 mm	11.43 mm	Not Qualified	4.75 V	75 mA	SEATED HT-CALCULATED				11.43 mm	9176
74FCT388915TDJG	Renesas Electronics	PLL BASED CLOCK DRIVER		J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	SCHMITT TRIGGER MUX	1	CMOS	3.3		1	CHIP CARRIER	LDCC28,.5SQ	1.3 ns	32 Amp		1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	TIN	7	QUAD	133 MHz	S-PQCC-J28	3	3.6 V	4.572 mm	11.5 mm		3 V	120 mA		e3		260	11.5 mm	FCT
74FCT388915TEJG	Renesas Electronics	PLL BASED CLOCK DRIVER		J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	SCHMITT TRIGGER MUX	1	CMOS	3.3		1	CHIP CARRIER	LDCC28,.5SQ	1.3 ns	32 Amp		1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	TIN	7	QUAD	150 MHz	S-PQCC-J28	3	3.6 V	4.572 mm	11.5 mm		3 V	120 mA		e3		260	11.5 mm	FCT
74FCT388915TCJG	Renesas Electronics	PLL BASED CLOCK DRIVER		J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	SCHMITT TRIGGER MUX	1	CMOS	3.3		1	CHIP CARRIER	LDCC28,.5SQ	1.3 ns	32 Amp		1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	TIN	7	QUAD	100 MHz	S-PQCC-J28	3	3.6 V	4.572 mm	11.5 mm		3 V	120 mA		e3		260	11.5 mm	FCT
853S310CVILF	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		3.3	+-3.3	0	CHIP CARRIER	LDCC28,.5SQ	1.15 ns		Clock Drivers	1.27 mm	85 Cel		.04 ns	-40 Cel	Matte Tin (Sn) - annealed	8	QUAD	2000 MHz	S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V			e3	30	260	11.505 mm	853S
IDT74388915T133JG	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	MUX	1	CMOS	3.3		1	CHIP CARRIER					1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	MATTE TIN	7	QUAD	133 MHz	S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified	3 V			e3			11.5062 mm	FCT
853S310CVILFT	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		3.3	+-3.3	0	CHIP CARRIER	LDCC28,.5SQ	1.15 ns		Clock Drivers	1.27 mm	85 Cel		.04 ns	-40 Cel	Matte Tin (Sn) - annealed	8	QUAD	2000 MHz	S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V			e3	30	260	11.505 mm	853S
IDT74388915T100J	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	MUX	1	CMOS	3.3		1	CHIP CARRIER					1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	TIN LEAD	7	QUAD	100 MHz	S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified	3 V			e0			11.5062 mm	FCT
IDT74388915T100JG	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	MUX	1	CMOS	3.3		1	CHIP CARRIER					1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	MATTE TIN	7	QUAD	100 MHz	S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified	3 V			e3			11.5062 mm	FCT
IDT74388915T70JG	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	MUX	1	CMOS	3.3		1	CHIP CARRIER					1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	MATTE TIN	7	QUAD	70 MHz	S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified	3 V			e3			11.5062 mm	FCT
IDT74388915T70J	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	MUX	1	CMOS	3.3		1	CHIP CARRIER					1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	TIN LEAD	7	QUAD	70 MHz	S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified	3 V			e0			11.5062 mm	FCT
IDT74388915T150JG	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	MUX	1	CMOS	3.3		1	CHIP CARRIER					1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	MATTE TIN	7	QUAD	150 MHz	S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified	3 V			e3			11.5062 mm	FCT
IDT74388915T133J	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	MUX	1	CMOS	3.3		1	CHIP CARRIER					1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	TIN LEAD	7	QUAD	133 MHz	S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified	3 V			e0			11.5062 mm	FCT
IDT74388915T150J	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	MUX	1	CMOS	3.3		1	CHIP CARRIER					1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	TIN LEAD	7	QUAD	150 MHz	S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified	3 V			e0			11.5062 mm	FCT
LCK4310GF-DB	Broadcom	PLL BASED CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	2.5	+-2.5/+-3.3	0	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.04 ns	-40 Cel	TIN LEAD	8	QUAD		S-PQCC-J28			4.572 mm	11.506 mm	Not Qualified			ALSO OPERATES WITH 3.3V SUPPLY	e0	30	225	11.506 mm	4000/14000/40000
LCK4310GF-DT	Broadcom	PLL BASED CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL	2.5	+-2.5/+-3.3	0	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.04 ns	-40 Cel	TIN LEAD	8	QUAD		S-PQCC-J28			4.572 mm	11.506 mm	Not Qualified			ALSO OPERATES WITH 3.3V SUPPLY	e0	30	225	11.506 mm	4000/14000/40000
EQ6600-L3	Broadcom	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	CMOS	5	3.3/5	0	CHIP CARRIER	LDCC28,.5SQ		16 Amp	Clock Drivers	1.27 mm	70 Cel		.25 ns	0 Cel	TIN LEAD	10	QUAD	133 MHz	S-PQCC-J28		5.25 V	4.6 mm	11.51 mm	Not Qualified	3 V		O/P FREQUENCY RATIOS ARE 0.5F/1.0F; WITH DEDICATED FEEDBACK OUTPUT; MEETS PENTIUM SKEW REQUIREMENTS	e0			11.51 mm	6600
EQ6600-L1	Broadcom	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	CMOS	5	3.3/5	0	CHIP CARRIER	LDCC28,.5SQ		16 Amp	Clock Drivers	1.27 mm	70 Cel		.25 ns	0 Cel	TIN LEAD	10	QUAD	100 MHz	S-PQCC-J28		5.25 V	4.6 mm	11.51 mm	Not Qualified	3 V		O/P FREQUENCY RATIOS ARE 0.5F/1.0F; WITH DEDICATED FEEDBACK OUTPUT; MEETS PENTIUM SKEW REQUIREMENTS	e0			11.51 mm	6600
EQ6600	Broadcom	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	CMOS	5	5	0	CHIP CARRIER	LDCC28,.5SQ		16 Amp	Clock Drivers	1.27 mm	70 Cel		.25 ns	0 Cel	TIN LEAD	10	QUAD	80 MHz	S-PQCC-J28		5.25 V	4.6 mm	11.51 mm	Not Qualified	4.75 V		O/P FREQUENCY RATIOS ARE 0.5F/1.0F; WITH DEDICATED FEEDBACK OUTPUT; MEETS PENTIUM SKEW REQUIREMENTS	e0			11.51 mm	6600
EQ6600-L7	Broadcom	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	CMOS	3.3	3.3	0	CHIP CARRIER	LDCC28,.5SQ		16 Amp	Clock Drivers	1.27 mm	70 Cel		.25 ns	0 Cel	TIN LEAD	10	QUAD	170 MHz	S-PQCC-J28		3.6 V	4.6 mm	11.51 mm	Not Qualified	3 V		O/P FREQUENCY RATIOS ARE 0.5F/1.0F; WITH DEDICATED FEEDBACK OUTPUT; MEETS PENTIUM SKEW REQUIREMENTS	e0			11.51 mm	6600

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.