Maxim Integrated Clock Drivers & Buffers 139

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MAX9174EUB-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3.23 ns			.5 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	2	DUAL		S-PDSO-G10	1	3.6 V	1.1 mm	3 mm	Not Qualified	3 V		e0			3 mm
MAX9175EUB	Maxim Integrated	CLOCK DRIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS	3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	3.23 ns		Clock Drivers	.5 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	2	DUAL		S-PDSO-G10	1	3.6 V	1.1 mm	3 mm	Not Qualified	3 V		e0			3 mm
DS21610SN+	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	SMALL OUTLINE		41 ns			1.27 mm	85 Cel			-40 Cel	MATTE TIN	2	DUAL	8.192 MHz	R-PDSO-G16	1	3.465 V	2.65 mm	7.5 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e3	30	260	10.3 mm	21610
DS21610QN/T&R	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	CHIP CARRIER		41 ns			1.27 mm	85 Cel			-40 Cel	TIN LEAD	2	QUAD	8.192 MHz	S-PQCC-J28	1	3.465 V	4.572 mm	11.5062 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e0			11.5062 mm	21610
DS1181LE+	Maxim Integrated	PLL BASED CLOCK DRIVER	AUTOMOTIVE	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	125 Cel	3-STATE		-40 Cel	MATTE TIN	1	DUAL		R-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	3 V		e3	30	260	4.4 mm	1181
DS21610QN	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	CHIP CARRIER		41 ns			1.27 mm	85 Cel			-40 Cel	TIN LEAD	2	QUAD	8.192 MHz	S-PQCC-J28	1	3.465 V	4.57 mm	11.505 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e0		245	11.505 mm	21610
DS21604N	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1		3.3		0	IN-LINE		15 ns			2.54 mm	85 Cel			-40 Cel	TIN LEAD	2	DUAL	8.192 MHz	R-PDIP-T8	1	3.465 V	4.572 mm	7.62 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e0			9.375 mm	21604
DS21610SN/T&R	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	SMALL OUTLINE		41 ns			1.27 mm	85 Cel			-40 Cel	TIN LEAD	2	DUAL	8.192 MHz	R-PDSO-G16	1	3.465 V	2.67 mm	7.495 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e0			10.285 mm	21610
DS21602SN	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	SMALL OUTLINE		15 ns			1.27 mm	85 Cel			-40 Cel	TIN LEAD	2	DUAL	8.192 MHz	R-PDSO-G16	1	3.465 V	2.65 mm	7.5 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e0			10.3 mm	21602
DS21600N	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1		3.3		0	IN-LINE		15 ns			2.54 mm	85 Cel			-40 Cel	TIN LEAD	2	DUAL	6.176 MHz	R-PDIP-T8	1	3.465 V	4.572 mm	7.62 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e0			9.375 mm	21600
DS21600SN/T&R	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	SMALL OUTLINE		15 ns			1.27 mm	85 Cel			-40 Cel	TIN LEAD	2	DUAL	6.176 MHz	R-PDSO-G16	1	3.465 V	2.67 mm	7.5 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e0			10.3 mm	21600
DS1181LE+T	Maxim Integrated	PLL BASED CLOCK DRIVER	AUTOMOTIVE	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	125 Cel	3-STATE		-40 Cel	Matte Tin (Sn)	1	DUAL		R-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	3 V		e3	30	260	4.4 mm	1181
DS21600N+	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1		3.3		0	IN-LINE		15 ns			2.54 mm	85 Cel			-40 Cel	MATTE TIN	2	DUAL	6.176 MHz	R-PDIP-T8	1	3.465 V	4.572 mm	7.62 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e3	30	260	9.375 mm	21600
DS21602N	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1		3.3		0	IN-LINE		15 ns			2.54 mm	85 Cel			-40 Cel	TIN LEAD	2	DUAL	8.192 MHz	R-PDIP-T8	1	3.465 V	4.572 mm	7.62 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e0			9.375 mm	21602
DS21600SN+T&R	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	SMALL OUTLINE		15 ns			1.27 mm	85 Cel			-40 Cel	MATTE TIN	2	DUAL	6.176 MHz	R-PDSO-G16	1	3.465 V	2.67 mm	7.495 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e3	30	260	10.285 mm	21600
DS21602SN+	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	SMALL OUTLINE		15 ns			1.27 mm	85 Cel			-40 Cel	MATTE TIN	2	DUAL	8.192 MHz	R-PDSO-G16	1	3.465 V	2.65 mm	7.5 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e3	30	260	10.3 mm	21602
DS21602N+	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1		3.3		0	IN-LINE		15 ns			2.54 mm	85 Cel			-40 Cel	MATTE TIN	2	DUAL	8.192 MHz	R-PDIP-T8	1	3.465 V	4.572 mm	7.62 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e3	30	260	9.375 mm	21602
DS21604SN	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	SMALL OUTLINE		15 ns			1.27 mm	85 Cel			-40 Cel	TIN LEAD	2	DUAL	8.192 MHz	R-PDSO-G16	1	3.465 V	2.65 mm	7.5 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e0			10.3 mm	21604
DS21610SN	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	SMALL OUTLINE		41 ns			1.27 mm	85 Cel			-40 Cel	TIN LEAD	2	DUAL	8.192 MHz	R-PDSO-G16	1	3.465 V	2.65 mm	7.5 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e0			10.3 mm	21610
DS21600SN+	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	SMALL OUTLINE		15 ns			1.27 mm	85 Cel			-40 Cel	MATTE TIN	2	DUAL	6.176 MHz	R-PDSO-G16	1	3.465 V	2.65 mm	7.5 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e3	30	260	10.3 mm	21600
DS21600SN	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	SMALL OUTLINE		15 ns			1.27 mm	85 Cel			-40 Cel	TIN LEAD	2	DUAL	6.176 MHz	R-PDSO-G16	1	3.465 V	2.65 mm	7.5 mm	Not Qualified	3.135 V	ALSO OPERATES AT 5V SUPPLY	e0			10.3 mm	21600
MAX9322ETK	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	68	VQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	BIPOLAR	3.3	+-2.375/+-3.8	0	CHIP CARRIER, VERY THIN PROFILE	LCC68,.4SQ,20	1.175 ns		Clock Drivers	.5 mm	85 Cel		.056 ns	-40 Cel	TIN LEAD	15	QUAD	93 MHz	S-XQCC-N68		3.8 V	.9 mm	10 mm	Not Qualified	2.375 V	LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			10 mm	9322
MAX9313EHJ	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		2.5	2.5/3.3	0	FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	.41 ns		Clock Drivers	.5 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	10	QUAD		S-PQFP-G32	1	3.8 V	1.2 mm	5 mm	Not Qualified	2.25 V	CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR LVECL	e0			5 mm	9313
MAX9317BECJ+	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	BIPOLAR	3.3		0	FLATPACK, LOW PROFILE		.6 ns			.8 mm	85 Cel		.045 ns	-40 Cel	MATTE TIN	5	QUAD	1000 MHz	S-PQFP-G32	1	3.6 V	1.6 mm	7 mm	Not Qualified	3 V		e3	30	260	7 mm
MAX9317ECJ-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	BIPOLAR	2.5	2.5	0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.6 ns		Clock Drivers	.8 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	5	QUAD	1000 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V		e0			7 mm
MAX9317ETJ	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	DIFFERENTIAL	2	BIPOLAR	2.5	2.5	0	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20	.6 ns		Clock Drivers	.5 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	5	QUAD	1000 MHz	S-CQCC-N32	1	2.625 V	.8 mm	5 mm	Not Qualified	2.375 V		e0			5 mm
MAX9320EUA	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		2.5	+-2.25/+-3.8	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.265 ns		Clock Drivers	.65 mm	85 Cel		.03 ns	-40 Cel	TIN LEAD	2	DUAL		S-PDSO-G8	1	3.8 V	1.1 mm	3 mm	Not Qualified	2.25 V	LVECL MODE; VCC=0V WITH VEE=-2.25 TO -3.8V	e0		245	3 mm	9320
MAX9323EUP-G05	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	BICMOS	3.3		4	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.6 ns			.65 mm	85 Cel		.03 ns	-40 Cel	TIN LEAD	4	DUAL		R-PDSO-G20	1	3.6 V	1.1 mm	4.4 mm		3 V		e0			6.5 mm	9323
MAX9451EHJ+	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	32	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	CMOS	3.3		0	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH					.5 mm	85 Cel	3-STATE	.106 ns	-40 Cel	MATTE TIN	2	QUAD	160 MHz	S-PQFP-G32	1	3.6 V	1.2 mm	5 mm	Not Qualified	2.4 V		e3	30	260	5 mm	9451
MAX9316AEWP+	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR	3.3		0	SMALL OUTLINE		.44 ns			1.27 mm	85 Cel		.04 ns	-40 Cel	MATTE TIN	5	DUAL	1500 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	3 V		e3	30	260	12.8 mm
MAX9323EUP+	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	BICMOS	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.6 ns			.65 mm	85 Cel		.03 ns	-40 Cel	MATTE TIN	4	DUAL	1500 MHz	R-PDSO-G20	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	3 V		e3	30	260	6.5 mm
MAX9174EUB	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS	3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	3.23 ns		Clock Drivers	.5 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	2	DUAL		S-PDSO-G10	1	3.6 V	1.1 mm	3 mm	Not Qualified	3 V		e0			3 mm
MAX9314EGJ	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	DIFFERENTIAL	2		2.5	2.5/3.3	0	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20	.41 ns		Clock Drivers	.5 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	5	QUAD		S-CQCC-N32		3.8 V	1 mm	5 mm	Not Qualified	2.25 V	CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR DIFFERENTIAL LVECL	e0			5 mm
MAX9326EGI-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	BIPOLAR	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.506 ns			.5 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	9	QUAD		S-XQCC-N28	1	3.8 V	.9 mm	5 mm	Not Qualified	2.375 V	LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			5 mm
MAX9160EUI+	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS	3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3.8 ns	8 Amp	Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	MATTE TIN	14	DUAL	125 MHz	R-PDSO-G28	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	3 V		e3	30	260	9.7 mm
MAX9310EUP-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR	2.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.6 ns			.65 mm	85 Cel		.025 ns	-40 Cel	TIN LEAD	5	DUAL	1000 MHz	R-PDSO-G20	1	2.625 V	1.1 mm	4.4 mm	Not Qualified	2.375 V		e0			6.5 mm
MAX9317CECJ+	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	BIPOLAR	3.3		0	FLATPACK, LOW PROFILE		.6 ns			.8 mm	85 Cel		.045 ns	-40 Cel	MATTE TIN	5	QUAD	1000 MHz	S-PQFP-G32	1	3.6 V	1.6 mm	7 mm	Not Qualified	3 V		e3	30	260	7 mm
MAX9323ETP	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	MUX	1	BICMOS	3.3	3.3	0	CHIP CARRIER, VERY THIN PROFILE	LCC20,.16SQ,20	.6 ns		Clock Drivers	.5 mm	85 Cel		.03 ns	-40 Cel	TIN LEAD	4	QUAD	1500 MHz	S-XQCC-N20	1	3.6 V	.8 mm	4 mm	Not Qualified	3 V		e0			4 mm
MAX9317ECJ	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	BIPOLAR	2.5	2.5	0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.6 ns		Clock Drivers	.8 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	5	QUAD	1000 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V		e0			7 mm
MAX9320ESA	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		2.5	+-2.25/+-3.8	0	SMALL OUTLINE	SOP8,.25	.265 ns		Clock Drivers	1.27 mm	85 Cel		.03 ns	-40 Cel	TIN LEAD	2	DUAL		R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified	2.25 V	LVECL MODE; VCC=0V WITH VEE=-2.25 TO -3.8V	e0			4.9 mm	9320
MAX9325EQI	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR	3.3	+-2.375/+-3.8	0	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V	LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			11.505 mm	9325
MAX9312EHJ	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		2.5	2.5/3.3	0	FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	.41 ns		Clock Drivers	.5 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	5	QUAD		S-PQFP-G32	1	3.8 V	1.2 mm	5 mm	Not Qualified	2.25 V	CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR DIFFERENTIAL LVECL	e0			5 mm
MAX9317AECJ-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	BIPOLAR	2.5		0	FLATPACK, LOW PROFILE		.6 ns			.8 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	5	QUAD	1000 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V		e0			7 mm
MAX9310AEUP-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.6 ns			.65 mm	85 Cel		.025 ns	-40 Cel	TIN LEAD	5	DUAL	1000 MHz	R-PDSO-G20	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	3 V		e0			6.5 mm
MAX9326ETI	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	BIPOLAR	3.3	3.3	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	.685 ns		Clock Drivers	.5 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	9	QUAD		S-XQCC-N28	1	3.8 V	.9 mm	5 mm	Not Qualified	2.375 V	LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			5 mm
MAX9160AEUI	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS	3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3.8 ns	8 Amp	Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	14	DUAL	125 MHz	R-PDSO-G28	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	3 V		e0			9.7 mm
MAX9326EQI+T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BIPOLAR	3.3	3.3	0	CHIP CARRIER	LDCC28,.5SQ	.685 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28		3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V	LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e3			11.505 mm
MAX9311EHJ	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		2.5	2.5/3.3	0	FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	.41 ns		Clock Drivers	.5 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	10	QUAD		S-PQFP-G32	1	3.8 V	1.2 mm	5 mm	Not Qualified	2.25 V	CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR LVECL	e0			5 mm	9311

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.