Onsemi Clock Drivers & Buffers 1,569

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
NB100LVEP224FAR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		2.5	-2.5/-3.3/2.5/3.3		0	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	.75 ns		Clock Drivers	.5 mm	85 Cel		.04 ns	0 Cel		24	QUAD		S-PQFP-G64	2	3.8 V	1.6 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC=0 WITH VEE = -2.375V TO -3.8V				10 mm	100LVE
I2040BF-08-TT	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	85 Cel			-40 Cel		1	DUAL	100 MHz	R-PDSO-G8		3.6 V	1.1 mm	3.9 mm	Not Qualified	3 V				40	250	4.4 mm	2040
NBSG14MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		ECL		2.5	-2.5/-3.3/2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.16 ns		Clock Drivers	.5 mm	85 Cel	SERIES-RESISTOR	.015 ns	-40 Cel	NICKEL GOLD PALLADIUM	4	QUAD	10500 MHz	S-XQCC-N16	1	3.465 V	1 mm	3 mm	Not Qualified	2.375 V		RSNECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V		30	260	3 mm	14
P2042AF-08ST	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3			0	SMALL OUTLINE					1.27 mm	70 Cel			0 Cel		1	DUAL	110 MHz	R-PDSO-G8		3.6 V	1.75 mm	3.91 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	4.9 mm	2042
PCS3P624Z05BG-08-ST	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3		30 pF	0	SMALL OUTLINE	SOP8,.25		8 Amp		1.27 mm	70 Cel	3-STATE	.25 ns	0 Cel		4	DUAL	100 MHz	R-PDSO-G8		3.6 V	1.75 mm	3.9 mm		3 V	40 mA					4.9 mm	PCS3
ASM5P2308AF-2-16-ST	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3			0	SMALL OUTLINE					1.27 mm	70 Cel	3-STATE	.4 ns	0 Cel		8	DUAL	133 MHz	R-PDSO-G16		3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	9.905 mm	2308
P2P2304NZF-08ST	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel		.1 ns	-40 Cel		4	DUAL		R-PDSO-G8		3.6 V	1.75 mm	3.9 mm		3 V						4.9 mm	2304
P1707AF-08SR	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3/3.3		0	SMALL OUTLINE	SOP8,.25		20 Amp	Clock Drivers	1.27 mm	70 Cel			0 Cel		1	DUAL	175 MHz	R-PDSO-G8		3.7 V	1.75 mm	3.91 mm	Not Qualified	2.7 V				NOT SPECIFIED	NOT SPECIFIED	4.9 mm	1707
NB2309AC1HDR2G	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3		0	SMALL OUTLINE	SOP16,.25		12 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE	.25 ns	0 Cel	TIN	8	DUAL	133.33 MHz	R-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e3		260	9.9 mm	2309
ASM5I2308AF-2-16-SR	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1				3.3			0	SMALL OUTLINE					1.27 mm	85 Cel	3-STATE		-40 Cel		8	DUAL	133 MHz	R-PDSO-G16		3.6 V	1.75 mm	3.9 mm		3 V						9.9 mm	2308
PCS3P73Z01AWG-08-CR	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	VSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1				3.3			1	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH		.175 ns			.5 mm	70 Cel			0 Cel		1	DUAL	20 MHz	S-PDSO-G8		3.6 V	.8 mm	2 mm	Not Qualified	3 V		ALSO OPERATES AT 2.5 V SUPPLY				2 mm	3P
NB2305AI1HDTR2G	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25		12 Amp	Clock Drivers	.65 mm	85 Cel		.25 ns	-40 Cel	MATTE TIN	4	DUAL	133.33 MHz	S-PDSO-G8	3	3.6 V	1.2 mm	3 mm	Not Qualified	3 V			e3	30	260	4.4 mm	2305
PCS3P624Z05CG-16-TR	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3		30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		8 Amp		.65 mm	70 Cel	3-STATE	.25 ns	0 Cel		8	DUAL	100 MHz	R-PDSO-G16		3.6 V	1.1 mm	4.4 mm		3 V	40 mA					5 mm	PCS3
NB100LVEP221FAR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		2.5	-2.5/-3.3/2.5/3.3		0	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	.71 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel		20	QUAD		S-PQFP-G52	2	3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V				10 mm	100LVE
X2040AG-08-ST	Onsemi	PLL BASED CLOCK DRIVER
PCS3P623Z09AG-16-TR	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1			TR	3.3		30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	.35 ns	8 Amp		.65 mm	85 Cel	3-STATE	.7 ns	-40 Cel		8	DUAL	50 MHz	R-PDSO-G16		3.6 V	1.1 mm	4.4 mm		3 V	27 mA					5 mm	PCS3
ASM5P2305A-1-08-ST	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3			0	SMALL OUTLINE		.35 ns			1.27 mm	70 Cel	3-STATE	.25 ns	0 Cel	TIN LEAD	4	DUAL	133 MHz	R-PDSO-G8		3.6 V	1.75 mm	3.9116 mm	Not Qualified	3 V			e0			4.9 mm	2305
NB2308AI1DR2	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3		0	SMALL OUTLINE	SOP16,.25		8 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.2 ns	-40 Cel	TIN LEAD	8	DUAL	133.3 MHz	R-PDSO-G16		3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e0		235	9.9 mm	2308
PCS3P625Z09BG-08-SR	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1			TR	3.3		10 pF	0	SMALL OUTLINE	SOP8,.25		8 Amp		1.27 mm	70 Cel	3-STATE	.25 ns	0 Cel		8	DUAL	175 MHz	R-PDSO-G8		3.6 V	1.75 mm	3.9 mm		3 V						4.9 mm	PCS3
X2040CG-08ST	Onsemi	PLL BASED CLOCK DRIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3			0	SMALL OUTLINE					1.27 mm	125 Cel			-40 Cel		1	DUAL		R-PDSO-G8		3.6 V	1.75 mm	3.91 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	4.9 mm	2040
NBSG111BAHTBG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	49	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		2.5	-2.5/-3.3/2.5/3.3		0	GRID ARRAY, LOW PROFILE	BGA49,7X7,40	.35 ns		Clock Drivers	1 mm	70 Cel		.02 ns	-40 Cel		10	BOTTOM		S-PBGA-B49		3.465 V	1.4 mm	8 mm	Not Qualified	2.375 V		NECL OPERATING RANGE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V				8 mm	111
NBSG14MAT1BG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BUTT	16	TBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		2.5	-2.5/-3.3/2.5/3.3		0	GRID ARRAY, THIN PROFILE	LGA16,4X4,40	.15 ns		Clock Drivers	1 mm	70 Cel	SERIES-RESISTOR	.015 ns	-40 Cel		4	BOTTOM	10700 MHz	S-PBGA-BU16		3.465 V	1.03 mm	4 mm	Not Qualified	2.375 V		RSNECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V				4 mm	14
NB2308AC2DT	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		8 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.4 ns	0 Cel	NICKEL PALLADIUM GOLD	8	DUAL	133.3 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4			5 mm	2308
ASM3P2669A-06OR	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	6	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		2.5			0	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH					.95 mm	70 Cel			0 Cel		1	DUAL	12 MHz	R-PDSO-G6		2.625 V	1 mm	1.6 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V SUPPLY		NOT SPECIFIED	NOT SPECIFIED	2.9 mm	2669
NBSG14BAR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				2.5			0	GRID ARRAY, LOW PROFILE		.15 ns			1 mm	70 Cel	SERIES-RESISTOR	.015 ns	-40 Cel		4	BOTTOM	10700 MHz	S-PBGA-B16		3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		RSNECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V		NOT SPECIFIED	NOT SPECIFIED	4 mm	14
PCS3I623Z05BG-08-TT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1			TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	.35 ns	8 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL	50 MHz	R-PDSO-G8	1	3.6 V	1.2 mm	3 mm	Not Qualified	3 V	27 mA			40	260	4.4 mm	PCS3
PCS3P625Z09CG-08-ST	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1			TUBE	3.3		10 pF	0	SMALL OUTLINE	SOP8,.25		8 Amp		1.27 mm	70 Cel	3-STATE	.25 ns	0 Cel		8	DUAL	175 MHz	R-PDSO-G8		3.6 V	1.75 mm	3.9 mm		3 V						4.9 mm	PCS3
FS612509-02	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3			0	SMALL OUTLINE						70 Cel	SERIES-RESISTOR	.15 ns	0 Cel		9	DUAL		R-PDSO-G24		3.6 V			Not Qualified	3 V
P1727GG-08-ST	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3			0	SMALL OUTLINE					1.27 mm	70 Cel			0 Cel		1	DUAL	40 MHz	R-PDSO-G8		3.6 V	1.75 mm	3.91 mm	Not Qualified	3 V						4.9 mm	1727
ASM5P2304AF-5H-08-SR	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3			0	SMALL OUTLINE					1.27 mm	70 Cel		.2 ns	0 Cel		4	DUAL	133.3 MHz	R-PDSO-G8		3.6 V	1.75 mm	3.9116 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	4.89 mm	2304
NB2308AC3DTG	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		8 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.4 ns	0 Cel	NICKEL PALLADIUM GOLD	8	DUAL	133.3 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4		260	5 mm	2308
I2040CG-08TR	Onsemi	PLL BASED CLOCK DRIVER	AUTOMOTIVE	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	125 Cel			-40 Cel		1	DUAL		R-PDSO-G8		3.6 V	1.2 mm	3 mm		3 V						4.4 mm	2040
NB7V33MMNHTBG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	10000000000 Hz			1.8	1.8/2.5		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.7 ns		Prescaler/Multivibrators	.5 mm	85 Cel		.05 ns	-40 Cel	NICKEL GOLD PALLADIUM	1	QUAD		S-XQCC-N16	1	2.625 V	1 mm	3 mm	Not Qualified	1.71 V	115 mA	IT ALSO OPERATES AT 2.5V SUPPLY		30	260	3 mm	7V
PCS3I622Z09CG-16-ST	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1			TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE	SOP16,.25		8 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.25 ns	-40 Cel		8	DUAL	20 MHz	R-PDSO-G16		3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V	18 mA					9.9 mm	PCS3
NB2308AI5HDTG	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.2 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL	15 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	5 mm	2308
ASM3P623S00BF-08-SR	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3			0	SMALL OUTLINE		.35 ns			1.27 mm	85 Cel		.25 ns	-40 Cel		1	DUAL	50 MHz	R-PDSO-G8		3.6 V	1.75 mm	3.91 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	4.9 mm	3P
ASM5P2305A-1H-08-TR	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.35 ns			.65 mm	70 Cel	3-STATE	.25 ns	0 Cel	TIN LEAD	4	DUAL	133 MHz	R-PDSO-G8		3.6 V	1.1 mm	3 mm	Not Qualified	3 V			e0			4.4 mm	2305
SB3N551DG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE		6 ns			1.27 mm	85 Cel	3-STATE	.25 ns	-40 Cel	TIN	4	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm		3 V			e3	30	260	4.9 mm	SB3
NB3V8312CMNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1				1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4.2 ns			.5 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	MATTE TIN	12	QUAD	250 MHz	S-XQCC-N32	1	2 V	1 mm	5 mm		1.6 V		ALSO OPERATES AT 2.5V, 3.3V SUPPLY VOLTAGE	e3	30	260	5 mm	NB3V
PCS2P2309NZG-16-SR	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		0	SMALL OUTLINE	SOP16,.25	6 ns	12 Amp	Clock Drivers	1.27 mm	70 Cel		.25 ns	0 Cel		9	DUAL	133.33 MHz	R-PDSO-G16		3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V						9.9 mm	2P
NB2308AI5HDG	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3		0	SMALL OUTLINE	SOP16,.25		12 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.2 ns	-40 Cel	TIN	8	DUAL	15 MHz	R-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e3	30	260	9.9 mm	2308
P1727AG-08-SR	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3			0	SMALL OUTLINE					1.27 mm	70 Cel			0 Cel		1	DUAL	40 MHz	R-PDSO-G8		3.6 V	1.75 mm	3.91 mm	Not Qualified	3 V						4.9 mm	1727
NB6L14MMNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.48 ns		Clock Drivers	.5 mm	85 Cel		.08 ns	-40 Cel	NICKEL GOLD PALLADIUM	4	QUAD		S-PQCC-N16	1	3.63 V	1 mm	3 mm	Not Qualified	2.375 V		IT ALSO OPERATES WITH 3.3V SUPPLY		30	260	3 mm	6L
MC10EL11DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		5	-5.2		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.34 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN	2	DUAL		S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e3	30	260	3 mm	10EL
MC100E221FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		5			0	CHIP CARRIER		1.125 ns			1.27 mm	85 Cel		.075 ns	0 Cel	TIN LEAD	6	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e0			11.505 mm	100E
P2I2304NZF-08-TR	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		5 ns			.65 mm	85 Cel		.15 ns	-40 Cel	TIN	4	DUAL		R-PDSO-G8	1	3.6 V	1.2 mm	3 mm		3 V			e3	30	260	4.4 mm	2304
MC10H641FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1		ECL		5	5		0	CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN LEAD	9	QUAD	65 MHz	S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e0		235	11.505 mm	10H
MC10E211FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		5	-5.2		0	CHIP CARRIER	LDCC28,.5SQ	1.125 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	0 Cel	TIN	6	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.