Texas Instruments Clock Drivers & Buffers 1,068

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
CDC2351DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.8 ns	12 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	15 mA		e4	NOT SPECIFIED	260	15.4 mm	2351
SNCDC328AD	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel		1 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
SNCDC304N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL				5		50 pF	0	IN-LINE					2.54 mm	70 Cel		1 ns	0 Cel		8	DUAL		80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified		4.5 V	75 mA	CENTER PIN VCC AND GND				19.305 mm	AS
CDC337DWG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TUBE	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	9 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V			e4	NOT SPECIFIED	260	12.825 mm	337
5962-9676101QRX	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	STANDARD	1	BICMOS				5			0	IN-LINE		7 ns				125 Cel		1.9 ns	-55 Cel		8	DUAL			R-GDIP-T20		5.5 V			Not Qualified		4.5 V							CDC
SNCDC337DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		9 ns			.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	85 mA	4 OUTPUTS ARE BUFFERED & THE OTHER 4 ARE DIVIDED BY TWO				7.2 mm	ABT
5962-9676101QRA	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	STANDARD	1	BICMOS	MIL-PRF-38535 Class Q			5	5		0	IN-LINE	DIP20,.3	7 ns	48 Amp	Clock Drivers	2.54 mm	125 Cel		1.9 ns	-55 Cel		8	DUAL			R-GDIP-T20		5.5 V			Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED		CDC
SNCDC2586PBG	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	MUX	1	BICMOS				3.3		15 pF	0	FLATPACK, LOW PROFILE					.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		12	QUAD		100 MHz	S-PQFP-G52		3.6 V	1.6 mm	10 mm	Not Qualified		3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; OUTPUT FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F; RMS JITTER = 25PS				10 mm	ABT
SN74ABT337DW	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP20,.4		48 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE		0 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ABT
CDC318DLR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	4.5 ns	6 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE	.25 ns	0 Cel		18	DUAL			R-PDSO-G48		3.465 V	2.79 mm	7.49 mm	Not Qualified		3.135 V				NOT SPECIFIED	NOT SPECIFIED	15.875 mm	318
CDC339DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TUBE	5	5		0	SMALL OUTLINE	SOP20,.4	9 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	85 mA		e4	30	260	12.8 mm	CDC
CDC536DBG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL		100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V			e4	30	260	10.2 mm	536
SNCDC351DB	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				3.3		50 pF	0	SMALL OUTLINE, SHRINK PITCH					.65 mm	70 Cel	3-STATE	.5 ns	0 Cel		10	DUAL			R-PDSO-G24		3.6 V	2 mm	5.3 mm	Not Qualified		3 V		MAX PART TO PART SKEW = 1NS				8.2 mm	ABT
CDC2510PWLE	Texas Instruments		COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES							3.3	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.635 mm	70 Cel			0 Cel			DUAL			R-PDSO-G24					Not Qualified
CDC587DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		20 Amp	Clock Drivers	.5 mm	70 Cel	3-STATE	.5 ns	0 Cel		16	DUAL		150 MHz	R-PDSO-G56		3.6 V	1.2 mm	6.1 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	14 mm	CDC
SN65LVELT23D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2				TUBE	3.3		20 pF	0	SMALL OUTLINE		2.5 ns	24 Amp		1.27 mm	85 Cel		.18 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		180 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	4.9 mm	65LVEL
SN74AS305N3	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL				5			4	IN-LINE		9 ns			2.54 mm	70 Cel		1.5 ns	0 Cel		4	DUAL		80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified		4.5 V						19.305 mm	AS
74ACT11208DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4	TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	11.5 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW		R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ACT
CDC2509BPWG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL		125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2509
SN0305042RTHT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.6 ns	12 Amp		.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	QUAD		800 MHz	S-PQCC-N24	2	3.6 V	1 mm	4 mm	Not Qualified		3 V		3 LVPECL DIFFERENTIAL CLOCK OUTPUTS AND SINGLE ENDED LVCMOS OUTPUT	e4	30	260	4 mm	1803
SNCDC2587DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1					3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.5 mm	70 Cel	3-STATE	.5 ns	0 Cel		16	DUAL		150 MHz	R-PDSO-G56		3.6 V	1.2 mm	6.1 mm	Not Qualified		3 V						14 mm	SNCD
CDCF5801ADBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			TUBE	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		40 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		280 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V		DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE	e4	30	260	8.65 mm	5801
LMH2190TMX-38	Texas Instruments	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	VFBGA	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2					3.5			0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH					.4 mm	85 Cel			-20 Cel	TIN LEAD	4	BOTTOM			S-PBGA-B16		5.5 V	.675 mm	1.615 mm	Not Qualified		2.5 V			e0			1.615 mm	2190
CDCP1803RGETG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TR	3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	.6 ns		Clock Drivers	.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	3	QUAD		800 MHz	S-PQCC-N24	2	3.6 V	1 mm	4 mm	Not Qualified		3 V			e4	30	260	4 mm	1803
SN65ELT21D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TUBE	5		20 pF	0	SMALL OUTLINE		4.5 ns			1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL			R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified		4.2 V			e4	30	260	4.9 mm	65ELT
V62/09619-01XE	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	.6 ns		Clock Drivers	.5 mm	125 Cel	3-STATE	.1 ns	-55 Cel	NICKEL PALLADIUM GOLD	3	QUAD		800 MHz	S-PQCC-N24	2	3.6 V	1 mm	4 mm	Not Qualified		3 V			e4	30	260	4 mm	1803
CDC2509BPWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL		125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2509
CDC2351DBR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.8 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	15 mA		e4	NOT SPECIFIED	260	8.2 mm	2351
SN54120W	Texas Instruments		MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC	YES			TTL				5	5			FLATPACK	FL16,.3			Clock Drivers	1.27 mm	125 Cel			-55 Cel			DUAL			R-XDFP-F16					Not Qualified
CDC2351MDBREP	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	11 ns	12 Amp	Clock Driver	.65 mm	125 Cel	3-STATE WITH SERIES RESISTOR	2.5 ns	-55 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	2	3.6 V	2 mm	5.3 mm	Not Qualified		3 V			e4	30	260	8.2 mm	2351
CDC337DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	9 ns	32 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	337
HPA00013PWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	2					3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel		.2 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL			R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm			3 V			e4	NOT SPECIFIED	260	7.8 mm	CDCF
CDC7005ZVA	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TRAY	3.3			0	GRID ARRAY, LOW PROFILE, FINE PITCH		.95 ns	6 Amp	Clock Driver	.8 mm	85 Cel	3-STATE	.06 ns	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	5	BOTTOM		800 MHz	S-PBGA-B64	3	3.6 V	1.4 mm	8 mm	Not Qualified		3 V	265 mA	INTEGRATED LOW-NOISE OP AMP	e1	NOT SPECIFIED	260	8 mm	7005
LMH1982SQX/NOPB	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1				TR	3.3		15 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	70 Cel	3-STATE		0 Cel	MATTE TIN	2	QUAD		148.5 MHz	S-XQCC-N32	1	3.465 V	.8 mm	5 mm			3.135 V	70 mA	ALSO REQUIRES 2.5V SUPPLY	e3	30	260	5 mm	1982
CDC2536DL	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.4		12 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		6	DUAL		100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.49 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	9.525 mm	2536
CDC208DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4	TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.8 mm	208
LM98555CCMH/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	64	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			TUBE	3.3		220 pF	0	SMALL OUTLINE		6.68 ns			.5 mm	70 Cel	3-STATE	.49 ns	0 Cel	MATTE TIN	8	DUAL			R-PDSO-G64	4	5 V	1.2 mm	6.1 mm			3.3 V			e3	30	260	17 mm	98555
CDC2536DBRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	15 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6	DUAL		100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	2 mA		e4	NOT SPECIFIED	260	10.2 mm	2536
SNCDC509PWLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1					3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel	3-STATE	.25 ns	0 Cel		9	DUAL		125 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V						7.8 mm	SNCD
CGS64CT2525N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	CMOS				5			0	IN-LINE		12.4 ns			2.54 mm	85 Cel		.55 ns	-40 Cel		8	DUAL			R-PDIP-T14		5.5 V	5.08 mm	7.62 mm			4.5 V						19.18 mm	ACT
CDC328ADBR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	5 ns	48 Amp	Clock Drivers	.65 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		100 MHz	R-PDSO-G16	1	5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	6.2 mm	328
CDCP1803RTHR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	.6 ns		Clock Drivers	.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel		3	QUAD		800 MHz	S-PQCC-N24		3.6 V	.9 mm	4 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	4 mm	1803
CDCR83ADBQRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TR	3.3			1	SMALL OUTLINE, SHRINK PITCH			36 Amp		.635 mm	85 Cel	3-STATE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	1	DUAL		400 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V	70 mA		e4	NOT SPECIFIED	260	8.65 mm	CDC
SNCDC112FN	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL				3.3			0	CHIP CARRIER		.635 ns			1.27 mm	70 Cel	OPEN-EMITTER	.05 ns	0 Cel		9	QUAD			S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified		3 V	80 mA	STROBED OUTPUT; CONTROL INPUT IS LVTTL COMPATIBLE; MAX PART TO PART SKEW = 0.1NS				11.5062 mm	CDC
SN65ELT21DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TR	5		20 pF	0	SMALL OUTLINE		4.5 ns			1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL			R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified		4.2 V			e4	30	260	4.9 mm	65ELT
CDC305D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL				5	5		4	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1.5 ns	0 Cel		4	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	305
CDC304N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL				5	5		0	IN-LINE	DIP16,.3	9 ns	48 Amp	Clock Drivers	2.54 mm	70 Cel		1 ns	0 Cel		8	DUAL		80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED	19.305 mm	304
CDC536DBLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel		6	DUAL		100 MHz	R-PDSO-G28		3.6 V	2 mm	5.3 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	10.2 mm	CDC

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.