Clock Drivers & Buffers

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Screening Level	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SNCDC339DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE		9 ns			1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL	80 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	4.75 V	85 mA	4 OUTPUTS ARE BUFFERED & THE OTHER 4 ARE DIVIDED BY TWO				12.8 mm	ABT
CDCR83ADBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			1	SMALL OUTLINE, SHRINK PITCH				Clock Driver	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified	3.135 V			e4	30	260	8.65 mm	CDC
CDC516DGGRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		20 Amp	Clock Drivers	.5 mm	70 Cel		.2 ns	0 Cel	NICKEL PALLADIUM GOLD	16	DUAL	125 MHz	R-PDSO-G48	2	3.6 V	1.2 mm	6.1 mm	Not Qualified	3 V	.02 mA		e4	30	260	12.5 mm	516
CDC2510APWLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel		10	DUAL	100 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	7.8 mm	CDC
SN74SSTE32882ZALR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	BALL	176	BGA	RECTANGULAR	UNSPECIFIED	YES	DIFFERENTIAL	1	CMOS			1.5	1.5		0	GRID ARRAY	BGA176(UNSPEC)			Other Logic ICs		90 Cel			0 Cel		4	BOTTOM		R-XBGA-B176		1.575 V			Not Qualified	1.425 V							SSTE
CDC2536DLR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.4		12 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.49 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	9.525 mm	2536
CDC319DBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	400 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3.6 ns	6 Amp	Clock Driver	.65 mm	70 Cel	3-STATE	.25 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL	100 MHz	R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V	.5 mA		e4	NOT SPECIFIED	260	10.2 mm	319
CDC337NS	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP20,.3	9 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL	80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V				NOT SPECIFIED	NOT SPECIFIED	12.6 mm	337
CDC2586PAHRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	FLATPACK, THIN PROFILE	TQFP52,.47SQ,25		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	12	QUAD		S-PQFP-G52	4	3.6 V	1.2 mm	10 mm	Not Qualified	3 V			e4	30	260	10 mm	2586
CGS64C2525N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	CMOS			3.3			0	IN-LINE		12.5 ns			2.54 mm	85 Cel		.6 ns	-40 Cel		8	DUAL		R-PDIP-T14		6 V	5.08 mm	7.62 mm		2 V						19.18 mm	CMOS
CDC516DGGG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		20 Amp	Clock Drivers	.5 mm	70 Cel		.2 ns	0 Cel	NICKEL PALLADIUM GOLD	16	DUAL	125 MHz	R-PDSO-G48	2	3.6 V	1.2 mm	6.1 mm	Not Qualified	3 V	.02 mA		e4	30	260	12.5 mm	516
SNCDC303D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5		50 pF	2	SMALL OUTLINE					1.27 mm	70 Cel		2 ns	0 Cel		6	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	70 mA	FMAX @ CL=30PF				9.9 mm	AS
SNCDC351DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3		50 pF	0	SMALL OUTLINE					1.27 mm	70 Cel	3-STATE	.5 ns	0 Cel		10	DUAL		R-PDSO-G24		3.6 V	2.65 mm	7.5 mm	Not Qualified	3 V	25 mA	MAX PART TO PART SKEW = 1NS				15.4 mm	ABT
CDC304D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5	5		0	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1 ns	0 Cel		8	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	304
SN65EPT23D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		TUBE	3.3		20 pF	0	SMALL OUTLINE		1.9 ns	24 Amp		1.27 mm	85 Cel		.11 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL	300 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e4	30	260	4.9 mm	65EP
CDC2510CPWG4	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL	125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2510
CGS74CT2525M	Texas Instruments	CLOCK DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			5			0	SMALL OUTLINE		12.4 ns			1.27 mm	85 Cel		.55 ns	-40 Cel		8	DUAL		R-PDSO-G14		5.5 V	1.753 mm	3.9 mm		4.5 V						8.6235 mm	ACT
CDC857-2DGG	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				2.5	2.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	6 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.1 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		R-PDSO-G48	2	2.7 V	1.2 mm	6.1 mm	Not Qualified	2.3 V			e4	30	260	12.5 mm
CDC2509BPWLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.2 ns	0 Cel		9	DUAL	125 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	7.8 mm	CDC
SN74AS304N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL			5	5	50 pF	0	IN-LINE	DIP16,.3	9 ns	48 Amp	Clock Drivers	2.54 mm	70 Cel		1 ns	0 Cel		8	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V	75 mA			NOT SPECIFIED	NOT SPECIFIED	19.305 mm	AS
CDC351IDWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE	SOP24,.4	4.2 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		10	DUAL	100 MHz	R-PDSO-G24		3.6 V	2.65 mm	7.5 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	15.4 mm	351
CDC305N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL			5	5		4	IN-LINE	DIP16,.3	9 ns	48 Amp	Clock Drivers	2.54 mm	70 Cel		1.5 ns	0 Cel		4	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	19.305 mm	305
CDCF5801ADBQG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		TUBE	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		40 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL	280 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V		DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE	e4	30	260	8.65 mm	5801
CDC341NSR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP20,.3	4.9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns	0 Cel		8	DUAL		R-PDSO-G20		5.25 V			Not Qualified	4.75 V							CDC
CDC329D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP16,.25	6.6 ns	64 Amp	Clock Drivers	1.27 mm	85 Cel		2.5 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	329
SNCDC391DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5 ns			.65 mm	85 Cel	3-STATE	1 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
CDC112FN	Texas Instruments		COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES						3.3	3.3			CHIP CARRIER	LDCC28,.5SQ			Clock Drivers	1.27 mm	70 Cel			0 Cel			QUAD		S-PQCC-J28					Not Qualified
SN65LVELT22D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2			TUBE	3.3			0	SMALL OUTLINE		.55 ns			1.27 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified	3 V			e4	30	260	4.9 mm	65EL
LMH2191TMX	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.5			0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH		10.5 ns			.4 mm	85 Cel		3.1 ns	-40 Cel		2	BOTTOM		R-PBGA-B8		5.5 V	.6 mm	1.07 mm	Not Qualified	2.5 V		SEATED HGT NOM				1.615 mm	2191
CDC7005ZVAR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	3.3			0	GRID ARRAY, LOW PROFILE, FINE PITCH		.95 ns	6 Amp		.8 mm	85 Cel	3-STATE	.06 ns	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	5	BOTTOM	800 MHz	S-PBGA-B64	3	3.6 V	1.4 mm	8 mm	Not Qualified	3 V	265 mA	INTEGRATED LOW-NOISE OP AMP	e1	NOT SPECIFIED	260	8 mm	7005
CDC318ADLG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	4.5 ns	24 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE	.25 ns	0 Cel	NICKEL PALLADIUM GOLD	18	DUAL	100 MHz	R-PDSO-G48	2	3.465 V	2.79 mm	7.49 mm	Not Qualified	3.135 V	.5 mA		e4	30	260	15.875 mm	318
SNCDC209N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	2	CMOS			5		50 pF	0	IN-LINE		10.1 ns			2.54 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL		R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	3 V		CAN BE OPERATED FROM 3.3V SUPPLY ALSO; WITH DUAL OUTPUT ENABLE; CENTER PIN VCC AND GND				24.325 mm	AC
CGS74C2525N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	CMOS			3.3			0	IN-LINE		12.5 ns			2.54 mm	85 Cel		.6 ns	-40 Cel		8	DUAL		R-PDIP-T14		6 V	5.08 mm	7.62 mm		2 V						19.18 mm	CMOS
5962-9676101QSA	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	STANDARD	1	BICMOS	MIL-PRF-38535 Class Q		5	5		0	FLATPACK	FL20,.3	7 ns	48 Amp	Clock Drivers	1.27 mm	125 Cel		1.9 ns	-55 Cel		8	DUAL		R-GDFP-F20		5.5 V			Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED		CDC
CDCF5801ADBQR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		TR	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		40 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL	280 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V		DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE	e4	30	260	8.65 mm	5801
CDCFR83ADBQRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3			1	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL	533 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified	3.135 V			e4	30	260	8.65 mm	CDCF
CDCF2510PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		14 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL	140 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2510
CDC2586PAHR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	FLATPACK, THIN PROFILE	TQFP52,.47SQ,25		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	12	QUAD	100 MHz	S-PQFP-G52	4	3.6 V	1.2 mm	10 mm	Not Qualified	3 V			e4	30	260	10 mm	2586
LMH2180SDE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	STANDARD	2				2.7			0	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel			-40 Cel	TIN LEAD	2	DUAL	75 MHz	S-XDSO-N8		5 V	.8 mm	3 mm	Not Qualified	2.4 V			e0			3 mm	2180
CDC2351QDWR	Texas Instruments	LOW SKEW CLOCK DRIVER	AUTOMOTIVE	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3			0	SMALL OUTLINE		11 ns			1.27 mm	125 Cel	3-STATE	2.5 ns	-40 Cel		10	DUAL		R-PDSO-G24		3.6 V	2.65 mm	7.5 mm	Not Qualified	3 V						15.4 mm
SNCDC209DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			5		50 pF	0	SMALL OUTLINE		10.1 ns			1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL		R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	3 V		CAN BE OPERATED FROM 3.3V SUPPLY ALSO; WITH DUAL OUTPUT ENABLE; CENTER PIN VCC AND GND				12.8 mm	AC
CDC2351PWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SSOP24,.3	4.8 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		10	DUAL	100 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V						7.8 mm	2351
SN74120N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			TTL			5	5			IN-LINE	DIP16,.3			Clock Drivers	2.54 mm	70 Cel			0 Cel			DUAL		R-PDIP-T16
CDCF2509PWLE	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1				3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	85 Cel		.2 ns	0 Cel		9	DUAL	140 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V						7.8 mm	CDCF
SNJ54CDC341FK	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	STANDARD	1	BICMOS	MIL-PRF-38535		5			0	CHIP CARRIER		7 ns			1.27 mm	125 Cel		.8 ns	-55 Cel		8	QUAD	33 MHz	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified	4.5 V						8.89 mm	CDC
CDCR83DBQR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3			0	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL	400 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified	3.135 V			e4	30	260	8.65 mm	83
SN74SSQE32882ZCJR	Texas Instruments	PLL BASED CLOCK DRIVER		BALL	176	TFBGA	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			1.5	1.5		0	GRID ARRAY	BGA176,8X22,25			Other Logic ICs	.65 mm						0	BOTTOM		S-PBGA-B176			1.2 mm	6 mm	Not Qualified					NOT SPECIFIED	NOT SPECIFIED	15 mm	S
CDC5806PW	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25				.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		R-PDSO-G20	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	6.5 mm	5806

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.