Clock Drivers & Buffers

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Screening Level	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
CDCLVD110ARHBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	2.5	5 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 ns		Clock Drivers	.5 mm	85 Cel	3-STATE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	QUAD	100 MHz	S-PQCC-N32	2	2.625 V	1 mm	5 mm	Not Qualified	2.375 V	160 mA		e4	NOT SPECIFIED	260	5 mm	110
LMK1D1204PRHDT	Texas Instruments	LOW SKEW CLOCK DRIVER		NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR, 7 INCH	1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	.575 ns			.5 mm	105 Cel	3-STATE	.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	QUAD	2000 MHz	S-PQCC-N28	1	1.89 V	1 mm	5 mm		1.71 V	72 mA	ALSO OPERATES AT 2.5 V AND 3.3 V POWER SUPPLY	e4		260	5 mm	LMK
CDCVF2510PWG4	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3	3.3	25 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3.9 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.1 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL	175 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	NOT SPECIFIED	260	7.8 mm	2510
LMK04031BISQE/NOPB	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	BICMOS		TR	3.3	3.3	10 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		.5 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.1 ns	-40 Cel	MATTE TIN	5	QUAD	1570 MHz	S-XQCC-N48	3	3.45 V	.8 mm	7 mm	Not Qualified	3.15 V			e3	30	260	7 mm	4000/14000/40000
CDCU877RTBT	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS			1.8	1.8		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20		9 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.035 ns	-40 Cel		10	QUAD	340 MHz	S-PQCC-N40		1.9 V	.9 mm	6 mm	Not Qualified	1.7 V				NOT SPECIFIED	NOT SPECIFIED	6 mm	877
CDCVF2510APWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3.9 ns	12 Amp	Clock Drivers	.65 mm	85 Cel		.1 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL	175 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm
CDCV850IDGGRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS			2.5	2.5,2.5/3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.075 ns	-40 Cel		10	DUAL		R-PDSO-G48		2.7 V	1.2 mm	6.1 mm	Not Qualified	2.3 V				NOT SPECIFIED	NOT SPECIFIED	12.5 mm	850
CDCVF2505PWG4	Texas Instruments	PLL BASED CLOCK DRIVER																											NICKEL PALLADIUM GOLD					1								e4	30	260
CDCE72010RGCR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.4 ns			.5 mm	85 Cel	3-STATE	2.8 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	1500 MHz	S-PQCC-N64	3	3.6 V	1 mm	9 mm	Not Qualified	3 V			e4	30	260	9 mm	72010
CDCV850DGG	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TUBE	2.5	2.5,2.5/3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	4 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.075 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL	140 MHz	R-PDSO-G48	2	2.7 V	1.2 mm	6.1 mm	Not Qualified	2.3 V			e4	30	260	12.5 mm	850
CDCLVD1213RGTR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	2.5	2.5		0	CHIP CARRIER	LCC16,.12SQ,20	2.5 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3	QUAD	800 MHz	S-PQCC-N16	2	2.625 V	1 mm	3 mm	Not Qualified	2.375 V			e4	NOT SPECIFIED	260	3 mm	CDC
CDCE72010RGCRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.4 ns			.5 mm	85 Cel	3-STATE	2.8 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	QUAD	1500 MHz	S-PQCC-N64	3	3.6 V	1 mm	9 mm	Not Qualified	3 V			e4	NOT SPECIFIED	260	9 mm	72010
CDCLVP1216RGZT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	.55 ns		Clock Drivers	.5 mm	85 Cel	OPEN-EMITTER	.03 ns	-40 Cel	NICKEL PALLADIUM GOLD SILVER	16	QUAD	2000 MHz	S-PQCC-N48	3	3.6 V	1 mm	7 mm	Not Qualified	2.375 V	110 mA	DUMMY VAL	e4	30	260	7 mm	CDC
CDCU877ZQL	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				1.8	1.8		0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		9 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.035 ns	-40 Cel		10	BOTTOM	340 MHz	R-PBGA-B52		1.9 V	1 mm	4.5 mm	Not Qualified	1.7 V						7 mm	877
LMK04002BISQX/NOPB	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	BICMOS		TR	3.3	3.3	10 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		.5 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.1 ns	-40 Cel	MATTE TIN	5	QUAD	1750 MHz	S-XQCC-N48	3	3.45 V	.8 mm	7 mm	Not Qualified	3.15 V			e3	30	260	7 mm	4000/14000/40000
CDCL1810ARGZR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel		.064 ns	-40 Cel	NICKEL PALLADIUM GOLD	20	QUAD	650 MHz	S-PQCC-N48	3	1.9 V	1 mm	7 mm		1.7 V			e4	30	260	7 mm	CDCL
CDCLVD110VFRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	2.5		0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	3 ns		Clock Driver	.8 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	150 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V	130 mA		e4	30	260	7 mm	110
LMK1D1204RGTT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.575 ns			.5 mm	105 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	QUAD	2000 MHz	S-PQCC-N16	1	1.89 V	1 mm	3 mm		1.71 V	72 mA		e4		260	3 mm
CDCLVP110VFR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	-2.5/-3.3/2.5/3.3		0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.37 ns	5 Amp	Clock Drivers	.8 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	3500 MHz	S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified	2.375 V	380 mA	LVECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V; ALSO OPERATES AT 3.3 V SUPPLY	e4	30	260	7 mm	110
CDCMH52005V1RGCT	Texas Instruments
CDCLVD110ARHB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 ns			.5 mm	85 Cel	3-STATE		-40 Cel		10	QUAD	100 MHz	S-PQCC-N32		2.625 V	1 mm	5 mm	Not Qualified	2.375 V						5 mm	110
CDCV855PWG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TUBE	2.5	2.5	14 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	180 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified	2.3 V			e4	NOT SPECIFIED	260	9.7 mm	855
CDCV857BGQL	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	BALL	56	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				2.5	2.5		0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA56,6X10,25			Clock Drivers	.65 mm	85 Cel	3-STATE	.1 ns	0 Cel	TIN LEAD	10	BOTTOM	200 MHz	R-PBGA-B56		2.7 V	1 mm	4.5 mm	Not Qualified	2.3 V			e0			7 mm	857
CDCL6010RGZTG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				1.8	1.8		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		8 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.064 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	1250 MHz	S-PQCC-N48	3	1.9 V	1 mm	7 mm	Not Qualified	1.7 V			e4	30	260	7 mm	6010
CDCU877ARHAT	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	1.8	1.8		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20		9 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.035 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	340 MHz	S-PQCC-N40	3	1.9 V	1 mm	6 mm	Not Qualified	1.7 V			e4	30	260	6 mm	877
CDCM18014V1RGCR	Texas Instruments
CDCVF25084PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3	3.3	15 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL	180 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	5 mm	25084
LMK1D2102RGTR	Texas Instruments	LOW SKEW CLOCK DRIVER		NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR, 13 INCH	1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.575 ns			.5 mm	105 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	QUAD	2000 MHz	S-PQCC-N16	1	1.89 V	1 mm	3 mm		1.71 V	80 mA	ALSO OPERATES AT 2.5 V AND 3.3 V POWER SUPPLY	e4		260	3 mm	LMK
CDCLVP1212RHAR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	2.5/3.3		0	CHIP CARRIER	LCC40,.24SQ,20	.55 ns		Clock Drivers	.5 mm	85 Cel	OPEN-EMITTER	.025 ns	-40 Cel	NICKEL PALLADIUM GOLD SILVER	12	QUAD	2000 MHz	S-PQCC-N40	3	3.6 V	1 mm	6 mm	Not Qualified	2.375 V	88 mA		e4	30	260	6 mm	CDC
CDCVF2505PWLE	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.15 ns			.65 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel		4	DUAL	200 MHz	R-PDSO-G8		3.6 V	1.2 mm	3 mm	Not Qualified	3 V						4.4 mm
LMK00101SQX/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			TR	3.3	1.5/3.3,2.5/3.3	10 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	2.8 ns		Clock Drivers	.5 mm	85 Cel		.025 ns	-40 Cel	MATTE TIN	10	QUAD	200 MHz	S-XQCC-N32	1	3.45 V	.8 mm	5 mm	Not Qualified	2.375 V	25 mA		e3	30	260	5 mm	00101
CDCLVP111VF	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TRAY	2.5	+-2.5/+-3.3		0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.35 ns	5 Amp	Clock Drivers	.8 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	3500 MHz	S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified	2.375 V	85 mA	LVECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V; ALSO OPERATES AT 3.3 V SUPPLY	e4	30	260	7 mm	111
CDCVF111FNR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	3.3	3.3		0	CHIP CARRIER	LDCC28,.5SQ	.6 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	9	QUAD	650 MHz	S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified	3 V			e4	30	260	11.505 mm	111
LMK00308SQE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel		.05 ns	-40 Cel		16	QUAD		S-XQCC-N40		3.45 V	.8 mm	6 mm		3.15 V						6 mm	00308
LMK01010ISQX/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			TR	3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		.5 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel	MATTE TIN	8	QUAD	1600 MHz	S-XQCC-N48	3	3.45 V	.8 mm	7 mm	Not Qualified	3.15 V			e3	30	260	7 mm	01010
LMK00334RTVT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			TR	3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		1 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE		-40 Cel	MATTE TIN	8	QUAD	400 MHz	S-XQCC-N32	3	3.45 V	.8 mm	5 mm	Not Qualified	3.15 V			e3	30	260	5 mm	00334
CDCE18005RGZR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD SILVER	10	QUAD	1500 MHz	S-PQCC-N48	3	3.6 V	1 mm	7 mm	Not Qualified	3 V			e4	30	260	7 mm	CDC
LMK01020ISQ/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			TR	3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		.5 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel	MATTE TIN	8	QUAD	1600 MHz	S-XQCC-N48	3	3.45 V	.8 mm	7 mm	Not Qualified	3.15 V			e3	30	260	7 mm	01020
CDCVF857GQL	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	56	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				2.5	2.5		0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA56,6X10,25	3.5 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.04 ns	-40 Cel	TIN LEAD	10	BOTTOM	220 MHz	R-PBGA-B56		2.7 V	1 mm	4.5 mm	Not Qualified	2.3 V			e0			7 mm	857
CDCU877ARHAR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	1.8	1.8		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20		9 Amp	Clock Driver	.5 mm	85 Cel	3-STATE	.035 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	340 MHz	S-PQCC-N40	3	1.9 V	1 mm	6 mm	Not Qualified	1.7 V			e4	30	260	6 mm	877
CDCU2A877ZQLT	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	1.8	1.8		0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		18 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.035 ns	0 Cel	TIN SILVER COPPER	10	BOTTOM	410 MHz	R-PBGA-B52	2	1.9 V	1 mm	4.5 mm	Not Qualified	1.7 V			e1	30	260	7 mm	877
CDCVF2509APWG4	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3	25 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3.9 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.1 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	9	DUAL	175 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	NOT SPECIFIED	260	7.8 mm	2509
CDCVF2510APWR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3	3.3	25 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3.9 ns	12 Amp	Clock Driver	.65 mm	85 Cel	SERIES-RESISTOR	.1 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL	175 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2510
LMK04031BISQX/NOPB	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	BICMOS		TR	3.3	3.3	10 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		.5 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.1 ns	-40 Cel	MATTE TIN	5	QUAD	1570 MHz	S-XQCC-N48	3	3.45 V	.8 mm	7 mm	Not Qualified	3.15 V			e3	30	260	7 mm	4000/14000/40000
CDCLVP2106RHAT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	2.5	2.5/3.3		0	CHIP CARRIER	LCC40,.24SQ,20	.55 ns		Clock Drivers	.5 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	12	QUAD	2000 MHz	S-PQCC-N40	3	3.6 V	1 mm	6 mm	Not Qualified	2.375 V	92 mA		e4	30	260	6 mm	CDC
CDCLVD110VF	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TRAY	2.5	2.5		0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	3 ns		Clock Driver	.8 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	150 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V	130 mA		e4	30	260	7 mm	110
LMK00804BQWRGTRQ1	Texas Instruments	LOW SKEW CLOCK DRIVER	AUTOMOTIVE	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		AEC-Q100	TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.5 ns			.5 mm	125 Cel	3-STATE	.035 ns	-40 Cel	Matte Tin (Sn)	4	QUAD	350 MHz	S-PQCC-N16	2	3.465 V	1 mm	3 mm		3.135 V			e3	30	260	3 mm	LMK
CDCVF25084PWG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 ns	12 Amp	Clock Driver	.65 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL	180 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	5 mm	25084

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.