SILICON DELAY LINE Delay Lines 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Nominal Total Delay (td)	Surface Mount	No. of Functions	No. of Taps/Steps	Technology	Nominal Output Impedance (Z0)	Programmable Delay Line	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family	Maximum Input Frequency (fmax)
DS1010S-100/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	100 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.67 mm	7.495 mm	Not Qualified	TRUE	4.75 V	150 mA		e0			10.285 mm	1010
DS1100U-45/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	45 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V	50 mA		e0			3 mm	1100
DS1110S-80	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	80 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	150 mA		e0			10.3 mm
DS1005H-250	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	250 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	GWDIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V	75 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.4615 mm	CMOS/TTL	2.5 MHz
DS1035M-006	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	6 ns	NO	3	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V			e0			9.375 mm	CMOS/TTL	83.3333 MHz
DS1007S-14	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	9 ns	YES	7	1	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	70 mA		e0			10.3 mm	1007
DS1035E-30T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	30 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G20	1	5.25 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.75 V			e0			6.5 mm	CMOS/TTL	16.6667 MHz
DS1007-4	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	12 ns	NO	7	1	CMOS		NO	5	5	IN-LINE	DIP16,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T16		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	70 mA		e0			19.175 mm	1007
DS1100Z-30/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	30 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0		245	4.9 mm	1100
DS1013-50+	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	50 ns	NO	3	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDIP-T14	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V			e3	30	260	19.05 mm	CMOS
DS1100LU-75	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	75 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V	10 mA		e0			3 mm	1100
DS1100LU-100/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	100 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V	10 mA		e0			3 mm	1100
DS1044G-10	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT	e0			12.695 mm	CMOS/TTL	50 MHz
DS1000-200-IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	200 ns	NO	1	5	CMOS		NO	5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA		e0			19.05 mm	CMOS/TTL	3.125 MHz
DS1004Z-4/T&R/503	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	5	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel		DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.91 mm	Not Qualified	TRUE	4.75 V		INPUT TO 1ST TAP DELAY = 5NS				4.88 mm	CMOS
DS1035Z-25T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	25 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V			e0			4.9 mm	CMOS/TTL	20 MHz
DS1033Z-10	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	3	1	CMOS		NO	3.3	3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2.7 V	25 mA		e0	20	240	4.9 mm	1000
DS1100LM-250	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	250 ns	NO	1	5	CMOS	50 ohm	NO	3.3		IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8		3.6 V	4.572 mm	7.62 mm	Not Qualified	TRUE	2.7 V			e0			9.375 mm
DS1007S-8/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	30 ns	YES	7	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel		DUAL	R-PDSO-G16		5.25 V	2.67 mm	7.495 mm	Not Qualified	TRUE	4.75 V				NOT SPECIFIED	NOT SPECIFIED	10.285 mm	1007
DS1035Z-12/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	12 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.91 mm	Not Qualified	TRUE	4.75 V	35 mA		e0			4.88 mm	1035
DS1013C-801	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	200 ns	NO	3	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.375 mm	CMOS
DS1110E-400+	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	400 ns	YES	1	10	CMOS		NO	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G14	1	5.25 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.75 V			e3	30	260	5 mm
DS1004-8	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	4	1			NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V			e0			19.05 mm	1000
DS1035M-06	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	6 ns	NO	3	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT	e0			9.375 mm	CMOS/TTL	83.3333 MHz
DS1033Z-08(TAPE&REEL)	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	8 ns	YES	3	1	CMOS		NO	3.3		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2.7 V		BOTH LEADING & TRAILING EDGE ACCURACY	e0			4.9 mm	CMOS/TTL	62.5 MHz
DS1135LU-10/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	10 ns	YES	3	1		50 ohm	NO	3.3	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	2.7 V	10 mA		e0			3 mm	1135
DS1020	Maxim Integrated	SILICON DELAY LINE		THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	255	CMOS		YES	5		IN-LINE			2.54 mm			TIN LEAD	DUAL	R-PDIP-T16			4.572 mm	7.62 mm	Not Qualified	TRUE				e0			19.175 mm	1000
DS1044G-25T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	25 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V			e0			12.695 mm	CMOS/TTL	20 MHz
DS1013G-15	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	15 ns	NO	3	1	CMOS		NO	5	5	IN-LINE	GWDIP14,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			19.05 mm	CMOS	22.2222 MHz
DS1044-25	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	25 ns	NO	4	1	CMOS		NO	5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	45 mA		e0			19.05 mm	CMOS
DS1013-50	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	50 ns	NO	3	1	CMOS		NO	5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	70 mA		e0			19.05 mm	CMOS
DS1033Z-030	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	30 ns	YES	3	1			NO	3.3		SMALL OUTLINE				70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		3.6 V			Not Qualified	TRUE	2.7 V			e0				1000
DS1110S-400	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	400 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	150 mA		e0			10.3 mm
DS1005S-060	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	60 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.9 mm	CMOS/TTL	10.4167 MHz
DS1100M-100+	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	100 ns	NO	1	5	CMOS	50 ohm	NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T8	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	50 mA		e3	30	260	9.375 mm
DS1044-20	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	20 ns	NO	4	1	CMOS		NO	5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	45 mA		e0			19.05 mm	CMOS
DS1010G-80	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	80 ns	YES	1	10	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			12.695 mm	CMOS/TTL	7.8125 MHz
DS1135LU-20/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	20 ns	YES	3	1		50 ohm	NO	3.3	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	2.7 V	10 mA		e0			3 mm	1135
DS1010S-50+T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	50 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	150 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e3	30	260	10.3 mm	CMOS/TTL	12.5 MHz
DS1100LZ-35	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	35 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	10 mA		e0		245	4.9 mm	1100
DS1005K-200	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	200 ns	NO	1	5	CMOS		NO	5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			19.05 mm	CMOS/TTL	3.125 MHz
DS1033Z-008	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	8 ns	YES	3	1			NO	3.3		SMALL OUTLINE				70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	3.6 V			Not Qualified	TRUE	2.7 V			e0				1000
DS1004Z-5/T&R/402	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	5	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel		DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.91 mm	Not Qualified	TRUE	4.75 V		INPUT TO 1ST TAP DELAY = 5NS				4.88 mm	CMOS
DS1135U-25	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	25 ns	YES	3	1		50 ohm	NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V	35 mA		e0			3 mm	1135
DS1013S-025	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	25 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			10.3 mm	CMOS/TTL	13.3333 MHz
DS1044R-10/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT	e0			8.65 mm	CMOS/TTL	50 MHz
DS1012(DIE)-7	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	NO LEAD		DIE	UNSPECIFIED	UNSPECIFIED	15 ns	YES	2	1	CMOS		NO	5		UNCASED CHIP				85 Cel	-40 Cel	TIN LEAD	UPPER	X-XUUC-N		5.25 V			Not Qualified	TRUE	4.75 V		DELAY TRAILING EDGE[TYP.] = +-1NS OVER LEADING EDGE DELAY	e0				CMOS/TTL	11.1111 MHz
DS1100LU-35/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	35 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V			e0			3 mm	1100

Delay Lines

A delay line is an electronic component used in digital systems to introduce a delay or a time lag in a signal. Delay lines are commonly used in digital systems that require precise timing, synchronization, or control of signals.

Delay lines can be passive or active, depending on the method used to introduce the delay in the signal. Passive delay lines use passive components, such as capacitors, inductors, and resistors, to introduce the delay in the signal. Active delay lines use active components, such as amplifiers, to introduce the delay in the signal.

Delay lines can also be fixed or variable, depending on whether the delay introduced in the signal is fixed or can be adjusted. Fixed delay lines introduce a fixed delay in the signal, while variable delay lines can be adjusted to introduce a variable delay in the signal.

Delay lines are often used in digital systems that require precise timing or synchronization between different components or devices. For example, in a memory system, a delay line may be used to ensure that the signals sent to and received from the memory chips are synchronized and aligned with the clock signal.

Delay lines can also be used to compensate for signal propagation delays caused by long transmission lines or cables. In this case, the delay line is used to introduce a delay in the signal to compensate for the delay caused by the transmission line or cable.