8 Delay Lines 1,405

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Nominal Total Delay (td)	Surface Mount	No. of Functions	No. of Taps/Steps	Technology	Nominal Output Impedance (Z0)	Programmable Delay Line	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family	Maximum Input Frequency (fmax)
DS1000Z-250	Maxim Integrated		COMMERCIAL	GULL WING	8	SOP	RECTANGULAR			YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDSO-G8					Not Qualified			75 mA		e0
DS1100LU-35	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	35 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V	10 mA		e0			3 mm	1100
DS1004M-5	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	25 ns	NO	1	5	CMOS		NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	INPUT TO 1ST TAP DELAY = 5NS	e0		245	9.375 mm	CMOS	25 MHz
DS1000H-75	Maxim Integrated		COMMERCIAL	GULL WING	8	SOP	RECTANGULAR			YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	GWDIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-XDSO-G8					Not Qualified			75 mA		e0	20	240
DS1100Z-200/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	200 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0		245	4.9 mm	1100
DS1035Z-08	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	8 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT	e0			4.9 mm	CMOS/TTL	62.5 MHz
DS1012Z	Maxim Integrated	SILICON DELAY LINE		GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm			TIN LEAD	DUAL	R-PDSO-G8			1.75 mm	3.9 mm	Not Qualified	TRUE				e0			4.9 mm	1000
DS1100U-125/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	125 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V	50 mA		e0			3 mm	1100
DS1100LM-20	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	20 ns	NO	1	5	CMOS	50 ohm	NO	3.3		IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8		3.6 V	4.572 mm	7.62 mm	Not Qualified	TRUE	2.7 V			e0			9.375 mm
DS1135U-25/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	25 ns	YES	3	1		50 ohm	NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V	35 mA		e0			3 mm	1135
DS1000M-IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	5	CMOS		NO	5		IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8			4.572 mm	7.62 mm	Not Qualified	TRUE				e0			9.375 mm	1000
DS1013M-100+	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	100 ns	NO	3	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDIP-T8	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e3	30	260	9.375 mm	CMOS	3.33333 MHz
DS1040Z-A15	Maxim Integrated	PULSE GENERATOR DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	5	CMOS		YES	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	75 mA	SILICON PULSE GENERATOR; PULSE WIDTH CHANGE PER STEP = 2.5NS	e0			4.9 mm	CMOS/TTL	15.3846 MHz
DS1035Z-20/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	20 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.91 mm	Not Qualified	TRUE	4.75 V	35 mA		e0			4.88 mm	1035
DS1033Z-010	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	3	1			NO	3.3		SMALL OUTLINE				70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		3.6 V			Not Qualified	TRUE	2.7 V			e0				1000
DS1135M-8	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	8 ns	NO	3	1		50 ohm	NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	35 mA		e0			9.375 mm	1135
DS1100U-75/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	75 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V	50 mA		e0			3 mm	1100
DS1000Z-175	Maxim Integrated		COMMERCIAL	GULL WING	8	SOP	RECTANGULAR			YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDSO-G8					Not Qualified			75 mA		e0
DS1100Z-125	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	125 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0		245	4.9 mm	1100
DS1100U-60	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	60 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V	50 mA		e0			3 mm	1100
DS1033M-30	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	30 ns	NO	3	1	CMOS		NO	3.3	3.3	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		3.6 V	4.572 mm	7.62 mm	Not Qualified	TRUE	2.7 V	25 mA		e0			9.375 mm	1000
DS1004C-302	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	5	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel		DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V				NOT SPECIFIED	NOT SPECIFIED	9.375 mm	CMOS
DS1000Z-175-IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	175 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	75 mA		e0			4.9 mm	CMOS/TTL	3.57143 MHz
DS1035Z-006	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	6 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V			e0			4.9 mm	CMOS/TTL	83.3333 MHz
DS1135U-15/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	15 ns	YES	3	1		50 ohm	NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V	35 mA		e0			3 mm	1135
DS1100Z-175	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	175 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0			4.9 mm	1100
DS1100LU-40/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	40 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V			e0			3 mm	1100
DS1013M-80+	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	80 ns	NO	3	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e3			9.375 mm	CMOS
DS1013H-100	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	100 ns	NO	3	1	CMOS		NO	5	5	IN-LINE	GWDIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.375 mm	CMOS	3.33333 MHz
DS1100U-200	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	200 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V	50 mA		e0			3 mm	1100
DS1035Z-10/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.91 mm	Not Qualified	TRUE	4.75 V	35 mA		e0			4.88 mm	1035
DS1100LU-200	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	200 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V	10 mA		e0			3 mm	1100
DS1100Z-50/T&R/C607	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	50 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm		TRUE	4.75 V				NOT SPECIFIED	NOT SPECIFIED	4.9 mm	1100
DS1040Z-A20	Maxim Integrated	PULSE GENERATOR DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	5	CMOS		YES	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	75 mA	SILICON PULSE GENERATOR; PULSE WIDTH CHANGE PER STEP = 2.5NS	e0			4.9 mm	CMOS/TTL	14.2857 MHz
DS1100LU-150	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	150 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V	10 mA		e0		245	3 mm	1100
DS1100Z-200	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	200 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0		245	4.9 mm	1100
DS1100LU-40	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	40 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V	10 mA		e0		245	3 mm	1100
DS1012Z-7	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	15 ns	YES	2	1	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	70 mA	OUT2 IS INVERTED, OUT4 = D3 XOR D4	e0			4.9 mm	1000	11.1111 MHz
DS1035Z-08(TAPE&REEL)	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	8 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT	e0			4.9 mm	CMOS/TTL	62.5 MHz
DS1000Z-45-IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	45 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	75 mA		e0			4.9 mm	CMOS/TTL	13.8889 MHz
DS1005H-125(TAPE&REEL)	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	125 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.4615 mm	CMOS/TTL	5 MHz
DS1013M-40+	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	40 ns	NO	3	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDIP-T8	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e3	30	260	9.375 mm	CMOS
DS1100LZ-250	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	250 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	10 mA		e0		245	4.9 mm	1100
DS1100M-125+	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	125 ns	NO	1	5	CMOS	50 ohm	NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T8	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	50 mA		e3	30	260	9.375 mm
DS1100Z-300/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	300 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0		245	4.9 mm	1100
DS1100U-35/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	35 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V	50 mA		e0			3 mm	1100
DS1100LU-20/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	20 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V			e0			3 mm	1100
DS1000Z-250-IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	250 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	75 mA		e0			4.9 mm	CMOS/TTL	2.5 MHz

Delay Lines

A delay line is an electronic component used in digital systems to introduce a delay or a time lag in a signal. Delay lines are commonly used in digital systems that require precise timing, synchronization, or control of signals.

Delay lines can be passive or active, depending on the method used to introduce the delay in the signal. Passive delay lines use passive components, such as capacitors, inductors, and resistors, to introduce the delay in the signal. Active delay lines use active components, such as amplifiers, to introduce the delay in the signal.

Delay lines can also be fixed or variable, depending on whether the delay introduced in the signal is fixed or can be adjusted. Fixed delay lines introduce a fixed delay in the signal, while variable delay lines can be adjusted to introduce a variable delay in the signal.

Delay lines are often used in digital systems that require precise timing or synchronization between different components or devices. For example, in a memory system, a delay line may be used to ensure that the signals sent to and received from the memory chips are synchronized and aligned with the clock signal.

Delay lines can also be used to compensate for signal propagation delays caused by long transmission lines or cables. In this case, the delay line is used to introduce a delay in the signal to compensate for the delay caused by the transmission line or cable.