SOP Delay Lines 1,308

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Nominal Total Delay (td)	Surface Mount	No. of Functions	No. of Taps/Steps	Technology	Nominal Output Impedance (Z0)	Programmable Delay Line	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family	Maximum Input Frequency (fmax)
DS1013S	Maxim Integrated	SILICON DELAY LINE		GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	3	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm			TIN LEAD	DUAL	R-PDSO-G16	1		2.65 mm	7.5 mm	Not Qualified	TRUE				e0			10.3 mm	1000
DS1020S-100+	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	265 ns	YES	1	255	CMOS		YES	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	30 mA	PROGRAMMABLE USING 3-WIRE SERIAL PORT OR 8-BIT PARALLEL PORT	e3	30	260	10.3 mm	CMOS/TTL	1.88679 MHz
DS1044R-07	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	7 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT	e0			8.65 mm	CMOS/TTL	71.4286 MHz
DS1135Z-20/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	20 ns	YES	3	1		50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	35 mA		e0			4.9 mm	1135
DS1033Z-012	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	12 ns	YES	3	1			NO	3.3		SMALL OUTLINE				70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		3.6 V			Not Qualified	TRUE	2.7 V			e0				1000
DS1005H-60(TAPE&REEL)	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	60 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.4615 mm	CMOS/TTL	10.4167 MHz
DS1000S-60	Maxim Integrated		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR			YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDSO-G16					Not Qualified			75 mA		e0
DS1135LZ-20/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	20 ns	YES	3	1		50 ohm	NO	3.3	3/3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2.7 V	10 mA		e0			4.9 mm	1135
DS1013S-45	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	45 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.67 mm	7.5 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			10.285 mm	CMOS
DS1007S-1+T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	18 ns	YES	7	1	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	5.25 V	2.67 mm	7.495 mm	Not Qualified	TRUE	4.75 V	70 mA		e3			10.285 mm	1007
DS1013S-75+	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	75 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN	DUAL	R-PDSO-G16	1	5.25 V	2.67 mm	7.5 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e3			10.285 mm	CMOS
DS1000Z-125	Maxim Integrated		COMMERCIAL	GULL WING	8	SOP	RECTANGULAR			YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-XDSO-G8	1				Not Qualified			75 mA		e0	20	240
DS1013S-70	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	70 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.67 mm	7.5 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			10.285 mm	CMOS
DS1005H-100(TAPE&REEL)	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	100 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.4615 mm	CMOS/TTL	6.25 MHz
DS1045S-4	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	69 ns	YES	2	15	CMOS		YES	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	35 mA	TWO INDEPENDENTLY PROGRAMMABLE OUTPUTS FROM A SINGLE INPUT	e0			10.3 mm	CMOS/TTL	3.62319 MHz
DS1007S-7/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	25 ns	YES	7	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel		DUAL	R-PDSO-G16		5.25 V	2.67 mm	7.495 mm	Not Qualified	TRUE	4.75 V				NOT SPECIFIED	NOT SPECIFIED	10.285 mm	1007
DS1040Z-75/T&R	Maxim Integrated	PULSE GENERATOR DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	5	CMOS		YES	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V		SILICON PULSE GENERATOR; PULSE WIDTH CHANGE PER STEP = 15NS	e0			4.9 mm	CMOS/TTL	8 MHz
DS1010S-100/T&R/4S3	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	100 ns	YES	1	10	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel		DUAL	R-PDSO-G16		5.25 V	2.67 mm	7.495 mm	Not Qualified	TRUE	4.75 V						10.285 mm	1010
DS1135Z-15	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	15 ns	YES	3	1		50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	35 mA		e0			4.9 mm	1135
DS1012H-2	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	2	1	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V		OUT2 IS INVERTED, OUT3 = D3 AND D4, OUT4 = D3 OR D4	e0			9.4615 mm	CMOS/TTL	16.6667 MHz
DS1035Z-8T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	8 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V			e0			4.9 mm	CMOS/TTL	62.5 MHz
DS1000S-250IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	250 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V			e0			10.3 mm	1000
DS1005S-175+T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	175 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	75 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e3			9.9 mm	CMOS/TTL	3.57143 MHz
DS1135U-6+T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	6 ns	YES	3	1		50 ohm	NO	5	5	SMALL OUTLINE	TSSOP8,.19	Delay Lines	.635 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	1	5.25 V			Not Qualified	TRUE	4.75 V	35 mA		e3
DS1033Z-12/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	12 ns	YES	3	1			NO	3.3		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel		DUAL	R-PDSO-G8		3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2.7 V				NOT SPECIFIED	NOT SPECIFIED	4.9 mm	1000
DS1021S-50+	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	137.5 ns	YES	1	255	CMOS		YES	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	30 mA	PROGRAMMABLE USING 3-WIRE SERIAL PORT OR 8-BIT PARALLEL PORT	e3	30	260	10.3 mm	CMOS/TTL	3.63636 MHz
DS1007S-3	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	7	1	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	70 mA		e0			10.3 mm	1007
DS1100LZ-175/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	175 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e0			4.9 mm	1100
DS1100Z-300+T	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e3			4.9 mm	1100
DS1044R-25T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	25 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V			e0			8.65 mm	CMOS/TTL	20 MHz
DS1000S-25IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	25 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V			e0			10.3 mm	1000
DS1004Z-2+T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	13 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	75 mA	INPUT TO 1ST TAP DELAY = 5NS	e3	30	260	4.9 mm	CMOS/TTL	48.0769 MHz
DS1035Z-010	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT	e0			4.9 mm	CMOS/TTL	50 MHz
DS1044G-18T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	18 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V			e0			12.695 mm	CMOS/TTL	27.7778 MHz
DS1000Z-50-IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	50 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	75 mA		e0			4.9 mm	CMOS/TTL	12.5 MHz
DS1110S-175+	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	175 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	150 mA		e3	30	260	10.3 mm
DS1110S-150+	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	150 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	150 mA		e3	30	260	10.3 mm
DS1135Z-10	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	3	1		50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	35 mA		e0			4.9 mm	1135
DS1010S-450/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	450 ns	YES	1	10	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel		DUAL	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT		NOT SPECIFIED	NOT SPECIFIED	10.3 mm	1010	1.38889 MHz
DS1000S-200IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	200 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V			e0			10.3 mm	1000
DS1040Z-500+	Maxim Integrated	PULSE GENERATOR DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	5	CMOS		YES	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	75 mA	SILICON PULSE GENERATOR; PULSE WIDTH CHANGE PER STEP = 100NS	e3	30	260	4.9 mm	CMOS/TTL	1.81818 MHz
DS1044G-6T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	6 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V			e0			12.695 mm	CMOS/TTL	83.3333 MHz
DS1004Z-4T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	21 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		INPUT TO 1ST TAP DELAY = 5NS	e0			4.9 mm	CMOS/TTL	29.7619 MHz
DS1135Z-30/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	30 ns	YES	3	1		50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	35 mA		e0			4.9 mm	1135
DS1004Z-002	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	13 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		INPUT TO 1ST TAP DELAY = 5+-1.5NS; BOTH LEADING & TRAILING EDGE ACCURACY	e0			4.9 mm	CMOS/TTL	48.0769 MHz
DS1000S-350	Maxim Integrated		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR			YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDSO-G16					Not Qualified			75 mA		e0
DS1013S-25	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	25 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.67 mm	7.5 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			10.285 mm	CMOS
DS1013S-40	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	40 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.67 mm	7.5 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			10.285 mm	CMOS

Delay Lines

A delay line is an electronic component used in digital systems to introduce a delay or a time lag in a signal. Delay lines are commonly used in digital systems that require precise timing, synchronization, or control of signals.

Delay lines can be passive or active, depending on the method used to introduce the delay in the signal. Passive delay lines use passive components, such as capacitors, inductors, and resistors, to introduce the delay in the signal. Active delay lines use active components, such as amplifiers, to introduce the delay in the signal.

Delay lines can also be fixed or variable, depending on whether the delay introduced in the signal is fixed or can be adjusted. Fixed delay lines introduce a fixed delay in the signal, while variable delay lines can be adjusted to introduce a variable delay in the signal.

Delay lines are often used in digital systems that require precise timing or synchronization between different components or devices. For example, in a memory system, a delay line may be used to ensure that the signals sent to and received from the memory chips are synchronized and aligned with the clock signal.

Delay lines can also be used to compensate for signal propagation delays caused by long transmission lines or cables. In this case, the delay line is used to introduce a delay in the signal to compensate for the delay caused by the transmission line or cable.