INDUSTRIAL Delay Lines 1,373

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Nominal Total Delay (td)	Surface Mount	No. of Functions	No. of Taps/Steps	Technology	Nominal Output Impedance (Z0)	Programmable Delay Line	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family	Maximum Input Frequency (fmax)
MC10EP196FA	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	12.2 ns	YES	1	1023	ECL		YES	3.3	+-3.3/+-5	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	Delay Lines	.8 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G32		5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC=0 WITH VEE=-3.0 V TO -5.5 V	e0			7 mm	10E
MC100EP195FAR2	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	12.2 ns	YES	1	1023	ECL		YES	3.3	-4.5	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	Delay Lines	.8 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G32		3.6 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V	175 mA	NECL MODE: VCC=0 WITH VEE= -3.0V TO -3.6V	e0		235	7 mm	100E
MC100EP196FAR2	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	GULL WING	32	QFP	SQUARE	PLASTIC/EPOXY	12.2 ns	YES	1	1023	ECL		YES	3.3	+-3.3	FLATPACK	QFP32,.35SQ,32	Delay Lines	.8 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G32	2	3.6 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC=0 WITH VEE=-3.0 V TO -3.6 V	e0		235	7 mm	100E
MC10EP195MNG	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	12.2 ns	YES	1	1023	ECL		YES	3.3	-5.2	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Delay Lines	.5 mm	85 Cel	-40 Cel	TIN	QUAD	S-XQCC-N32	1	3.6 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V	180 mA	NECL MODE: VCC=0 WITH VEE= -3.0V TO -3.6V	e3	30	260	5 mm	10E
MC100EP195FAR2G	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	12.2 ns	YES	1	1023	ECL		YES	3.3	-4.5	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	Delay Lines	.8 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G32	2	3.6 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V	175 mA	NECL MODE: VCC=0 WITH VEE= -3.0V TO -3.6V	e3	30	260	7 mm	100E
MC100EP195MNR4G	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	12.2 ns	YES	1	1023	ECL		YES	3.3	-4.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Delay Lines	.5 mm	85 Cel	-40 Cel	TIN	QUAD	S-XQCC-N32	1	3.6 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V	175 mA	NECL MODE: VCC=0 WITH VEE= -3.0V TO -3.6V	e3	30	260	5 mm	100E
MC100EP195BMNR4G	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	12.2 ns	YES	1	1023	ECL		YES	3.3	-4.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Delay Lines	.5 mm	85 Cel	-40 Cel	TIN	QUAD	S-XQCC-N32	2	3.6 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V	170 mA	NECL MODE: VCC=0 WITH VEE=-3.0 V TO -3.6 V	e3	30	260	5 mm	100E
MC10EP196FAR2	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	12.2 ns	YES	1	1023	ECL		YES	3.3	+-3.3/+-5	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	Delay Lines	.8 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G32		5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC=0 WITH VEE=-3.0 V TO -5.5 V	e0			7 mm	10E
MC100EP196BFAG	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	12.4 ns	YES	1	1023	ECL		YES	3.3	+-3.3	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	Delay Lines	.8 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G32	2	3.6 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V	175 mA	NECL MODE: VCC=0 WITH VEE=-3.0 V TO -3.6 V	e3	30	260	7 mm	100E
MC10EP195FA	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	12.2 ns	YES	1	1023	ECL		YES	3.3	-5.2	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	Delay Lines	.8 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G32		3.6 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V	180 mA	NECL MODE: VCC=0 WITH VEE= -3.0V TO -3.6V	e0		235	7 mm	10E
MC100EP196FAR2G	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	GULL WING	32	QFP	SQUARE	PLASTIC/EPOXY	12.2 ns	YES	1	1023	ECL		YES	3.3	+-3.3	FLATPACK	QFP32,.35SQ,32	Delay Lines	.8 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G32	2	3.6 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC=0 WITH VEE=-3.0 V TO -3.6 V	e3	30	260	7 mm	100E
MC10EP195MNR4G	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	12.2 ns	YES	1	1023	ECL		YES	3.3	-5.2	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Delay Lines	.5 mm	85 Cel	-40 Cel	TIN	QUAD	S-XQCC-N32	1	3.6 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V	180 mA	NECL MODE: VCC=0 WITH VEE= -3.0V TO -3.6V	e3	30	260	5 mm	10E
MC100EP196BFAR2	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	12.4 ns	YES	1	1023	ECL		YES	3.3	+-3.3	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	Delay Lines	.8 mm	85 Cel	-40 Cel		QUAD	S-PQFP-G32	1	3.6 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V	175 mA	NECL MODE: VCC=0 WITH VEE=-3.0 V TO -3.6 V				7 mm	100E
MC10EP195FAR2	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	12.2 ns	YES	1	1023	ECL		YES	3.3	-5.2	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	Delay Lines	.8 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G32	2	3.6 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V	180 mA	NECL MODE: VCC=0 WITH VEE= -3.0V TO -3.6V	e0		235	7 mm	10E
MC100EP196BFA	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	12.4 ns	YES	1	1023	ECL		YES	3.3	+-3.3	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	Delay Lines	.8 mm	85 Cel	-40 Cel		QUAD	S-PQFP-G32	1	3.6 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V	175 mA	NECL MODE: VCC=0 WITH VEE=-3.0 V TO -3.6 V				7 mm	100E
MC100EP195BFAR2G	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	12.2 ns	YES	1	1023	ECL		YES	3.3	-4.5	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	Delay Lines	.8 mm	85 Cel	-40 Cel	TIN	QUAD	S-PQFP-G32	2	3.6 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V	170 mA	NECL MODE: VCC=0 WITH VEE=-3.0 V TO -3.6 V	e3	30	260	7 mm	100E
MC10EP195FAR2G	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	12.2 ns	YES	1	1023	ECL		YES	3.3	-5.2	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	Delay Lines	.8 mm	85 Cel	-40 Cel	TIN	QUAD	S-PQFP-G32	2	3.6 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V	180 mA	NECL MODE: VCC=0 WITH VEE= -3.0V TO -3.6V	e3		260	7 mm	10E
MC100EP196BFAR2G	Onsemi	ACTIVE DELAY LINE	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	12.4 ns	YES	1	1023	ECL		YES	3.3	+-3.3	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	Delay Lines	.8 mm	85 Cel	-40 Cel	TIN	QUAD	S-PQFP-G32	2	3.6 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V	175 mA	NECL MODE: VCC=0 WITH VEE=-3.0 V TO -3.6 V	e3		260	7 mm	100E
MXD1013SE025	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	25 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY	e0			9.9 mm	1013
MXD1013SE045-T	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	45 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY	e0			9.9 mm	1013
MXD1013UA010	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	10 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SSOP8,.2	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		5.25 V	1.11 mm	3 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY	e0			3 mm	1013
MXD1000UA150	Maxim Integrated		INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR			YES	1	5	CMOS		NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.635 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDSO-G8					Not Qualified			75 mA		e0
MXD1000PD75	Maxim Integrated		INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR			NO	1	5	CMOS		NO	5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-XDIP-T14					Not Qualified			75 mA		e0
MXD1013UA035-T	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	35 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SSOP8,.2	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		5.25 V	1.11 mm	3 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY	e0			3 mm	1013
MXD1013SA070	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	70 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY	e0		245	4.9 mm	1013
MXD1000-35UA	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	35 ns	YES	1	5			NO	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V			e0			3 mm	MXD1000
MXD1000-100PD	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	100 ns	NO	1	5			NO	5		IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V			e0			19.05 mm	MXD1000
MXD1000PA150	Maxim Integrated		INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR			NO	1	5	CMOS		NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-XDIP-T8					Not Qualified			75 mA		e0	20	240
MXD1000-150PD	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	150 ns	NO	1	5			NO	5		IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V			e0			19.05 mm	MXD1000
MXD1005SE200-T	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	200 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	70 mA		e0			9.9 mm	1000
MXD1000-300PD	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	300 ns	NO	1	5			NO	5		IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V			e0			19.05 mm	MXD1000
MXD1000SA125-T	Maxim Integrated		INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR			YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-XDSO-G8					Not Qualified			75 mA		e0
MXD1013SA035-T	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	35 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY	e0			4.9 mm	1013
MXD1000PD150	Maxim Integrated		INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR			NO	1	5	CMOS		NO	5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T14					Not Qualified			75 mA		e0
MXD1005UA175-T	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	175 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V	70 mA		e0		245	3 mm	1000
MXD1013UA030	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	30 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SSOP8,.2	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		5.25 V	1.11 mm	3 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY	e0			3 mm	1013
MXD1013SA200	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	200 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY	e0			4.9 mm	1013
MXD1013PD045	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	45 ns	NO	3	1	CMOS		NO	5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY	e0			19.05 mm	1013
MXD1000-25PD	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	25 ns	NO	1	5			NO	5		IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V			e0			19.05 mm	MXD1000
MXD1005PD250	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	250 ns	NO	1	5	CMOS		NO	5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	70 mA		e0		245	19.05 mm	1000
MXD1013UA075-T	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	75 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SSOP8,.2	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		5.25 V	1.11 mm	3 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY	e0			3 mm	1013
MXD1013UA045-T	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	45 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SSOP8,.2	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		5.25 V	1.11 mm	3 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY	e0			3 mm	1013
MAX3620AETT-T	Maxim Integrated	ACTIVE DELAY LINE	INDUSTRIAL	NO LEAD	6	HVSON	SQUARE	UNSPECIFIED	.75 ns	YES	2	4		50 ohm	NO	1.5	+-1.5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.11,37	Delay Lines	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-XDSO-N6	1		.8 mm	3 mm	Not Qualified	TRUE				e0			3 mm	3620	333 MHz
MXD1000PA100	Maxim Integrated		INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR			NO	1	5	CMOS		NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-XDIP-T8					Not Qualified			75 mA		e0	20	240
MXD1000-100EPA	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	100 ns	NO	1	5	TTL		NO	5		IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8			4.572 mm	7.62 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.375 mm	TTL
MXD1013UA025	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	25 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SSOP8,.2	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		5.25 V	1.11 mm	3 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY	e0			3 mm	1013
MXD1013UA150	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	150 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SSOP8,.2	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		5.25 V	1.11 mm	3 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY	e0			3 mm	1013
MXD1013SA040-T	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	40 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY	e0			4.9 mm	1013

Delay Lines

A delay line is an electronic component used in digital systems to introduce a delay or a time lag in a signal. Delay lines are commonly used in digital systems that require precise timing, synchronization, or control of signals.

Delay lines can be passive or active, depending on the method used to introduce the delay in the signal. Passive delay lines use passive components, such as capacitors, inductors, and resistors, to introduce the delay in the signal. Active delay lines use active components, such as amplifiers, to introduce the delay in the signal.

Delay lines can also be fixed or variable, depending on whether the delay introduced in the signal is fixed or can be adjusted. Fixed delay lines introduce a fixed delay in the signal, while variable delay lines can be adjusted to introduce a variable delay in the signal.

Delay lines are often used in digital systems that require precise timing or synchronization between different components or devices. For example, in a memory system, a delay line may be used to ensure that the signals sent to and received from the memory chips are synchronized and aligned with the clock signal.

Delay lines can also be used to compensate for signal propagation delays caused by long transmission lines or cables. In this case, the delay line is used to introduce a delay in the signal to compensate for the delay caused by the transmission line or cable.