GULL WING Delay Lines 1,782

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Nominal Total Delay (td)	Surface Mount	No. of Functions	No. of Taps/Steps	Technology	Nominal Output Impedance (Z0)	Programmable Delay Line	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family	Maximum Input Frequency (fmax)
DS1100LU-40/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	40 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V			e0			3 mm	1100
DS1020S-50+T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	137.5 ns	YES	1	255	CMOS		YES	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16		5.25 V	2.67 mm	7.5 mm	Not Qualified	TRUE	4.75 V	30 mA	PROGRAMMABLE USING 3-WIRE SERIAL PORT OR 8-BIT PARALLEL PORT	e3	30	260	10.285 mm	CMOS	3.63636 MHz
DS1044G-10T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V			e0			12.695 mm	CMOS/TTL	50 MHz
DS1044R-018	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	18 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT	e0			8.65 mm	CMOS/TTL	27.7778 MHz
DS1110S-75	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	75 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	150 mA		e0			10.3 mm
DS1100U-200	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	200 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V	50 mA		e0			3 mm	1100
DS1035Z-10/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.91 mm	Not Qualified	TRUE	4.75 V	35 mA		e0			4.88 mm	1035
DS1100LU-200	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	200 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V	10 mA		e0			3 mm	1100
DS1100Z-50/T&R/C607	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	50 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm		TRUE	4.75 V				NOT SPECIFIED	NOT SPECIFIED	4.9 mm	1100
DS1110LE-150+	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	150 ns	YES	1	10	CMOS		NO	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G14	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		2.7 V			e3	30	260	5 mm	1110
DS1007S-013	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	20 ns	YES	7	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V		'7 INDEPENDENT BUFFERED DELAYS WITH DELAY[NS] = 3,4,6,8,12,15,20'	e0			10.3 mm	CMOS/TTL	16.6667 MHz
DS1110LE-75	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	75 ns	YES	1	10	CMOS		NO	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		2.7 V			e0			5 mm	1110
DS1013S-30/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	30 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			10.3 mm	CMOS	11.1111 MHz
DS1110LE-50+	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	50 ns	YES	1	10	CMOS		NO	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G14		3.6 V	1.1 mm	4.4 mm	Not Qualified		2.7 V			e3	30	260	5 mm	1110
DS1040Z-A20	Maxim Integrated	PULSE GENERATOR DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	5	CMOS		YES	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	75 mA	SILICON PULSE GENERATOR; PULSE WIDTH CHANGE PER STEP = 2.5NS	e0			4.9 mm	CMOS/TTL	14.2857 MHz
DS1100LU-150	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	150 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V	10 mA		e0		245	3 mm	1100
DS1020S-50+W	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	137.5 ns	YES	1	255	CMOS		YES	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16		5.25 V	2.67 mm	7.5 mm	Not Qualified	TRUE	4.75 V		PROGRAMMABLE USING 3-WIRE SERIAL PORT OR 8-BIT PARALLEL PORT	e3			10.285 mm	CMOS	3.63636 MHz
DS1044R-010	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT	e0			8.65 mm	CMOS/TTL	50 MHz
DS1044R-25	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	25 ns	YES	4	1	CMOS		NO	5	5	SMALL OUTLINE	SOP14,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14		5.25 V	1.75 mm	3.91 mm	Not Qualified	TRUE	4.75 V	45 mA		e0			8.65 mm	CMOS
DS1007S-002	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	16 ns	YES	7	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V		'7 INDEPENDENT BUFFERED DELAYS WITH DELAY[NS] = 4,6,8,10,12,14,16'	e0			10.3 mm	CMOS/TTL	20.8333 MHz
DS1100Z-200	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	200 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0		245	4.9 mm	1100
DS1100LU-40	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	40 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V	10 mA		e0		245	3 mm	1100
DS1012Z-7	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	15 ns	YES	2	1	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	70 mA	OUT2 IS INVERTED, OUT4 = D3 XOR D4	e0			4.9 mm	1000	11.1111 MHz
DS1005S-060/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	60 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.68 mm	7.51 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			10.335 mm	CMOS/TTL	10.4167 MHz
DS1035Z-08(TAPE&REEL)	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	8 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT	e0			4.9 mm	CMOS/TTL	62.5 MHz
DS1033E-12(TAPE&REEL)	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	12 ns	YES	3	1	CMOS		NO	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G20	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2.7 V		BOTH LEADING & TRAILING EDGE ACCURACY	e0			6.5 mm	CMOS/TTL	41.6667 MHz
DS1000Z-45-IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	45 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	75 mA		e0			4.9 mm	CMOS/TTL	13.8889 MHz
DS1005H-125(TAPE&REEL)	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	125 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.4615 mm	CMOS/TTL	5 MHz
DS1100LZ-250	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	250 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	10 mA		e0		245	4.9 mm	1100
DS1010S-50+	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	50 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	5.25 V	2.67 mm	7.495 mm	Not Qualified	TRUE	4.75 V	150 mA		e3	30	260	10.285 mm	1010
DS1110LE-300+	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	300 ns	YES	1	10	CMOS		NO	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G14	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		2.7 V			e3	30	260	5 mm	1110
DS1044R-05	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	5 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT	e0			8.65 mm	CMOS/TTL	100 MHz
DS1020S-50/TR	Maxim Integrated		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	1	CMOS		YES	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G16					Not Qualified			30 mA		e0
DS1110S-200+	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	200 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	150 mA		e3	30	260	10.3 mm
DS1110LE-250+	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	250 ns	YES	1	10	CMOS		NO	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G14	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		2.7 V			e3	30	260	5 mm	1110
DS1007S-5/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	15 ns	YES	7	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel		DUAL	R-PDSO-G16		5.25 V	2.67 mm	7.495 mm	Not Qualified	TRUE	4.75 V				NOT SPECIFIED	NOT SPECIFIED	10.285 mm	1007
DS1100Z-300/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	300 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0		245	4.9 mm	1100
DS1100U-35/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	35 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V	50 mA		e0			3 mm	1100
DS1100LU-20/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	20 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V			e0			3 mm	1100
DS1000Z-250-IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	250 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	75 mA		e0			4.9 mm	CMOS/TTL	2.5 MHz
DS1020S-015	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	48.25 ns	YES	1	255	CMOS		YES	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.68 mm	7.51 mm	Not Qualified	TRUE	4.75 V		PROGRAMMABLE USING 3-WIRE SERIAL PORT OR 8-BIT PARALLEL PORT; ENABLE	e0			10.335 mm	CMOS/TTL	6.90846 MHz
DS1100LU-250	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	250 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V	10 mA		e0			3 mm	1100
DS1035E-8T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	8 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G20	1	5.25 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.75 V			e0			6.5 mm	CMOS/TTL	62.5 MHz
DS1044R-5T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	5 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V			e0			8.65 mm	CMOS/TTL	100 MHz
DS1100U-75+T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	75 ns	YES	1	5	CMOS	50 ohm	NO	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V			e3	30	260	3 mm	1100
DS1010S-50/T&R/701	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	50 ns	YES	1	10	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.67 mm	7.495 mm	Not Qualified	TRUE	4.75 V			e0			10.285 mm	1010
DS1000S-125IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	125 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V			e0			10.3 mm	1000
DS1000S-25	Maxim Integrated		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR			YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDSO-G16					Not Qualified			75 mA		e0

Delay Lines

A delay line is an electronic component used in digital systems to introduce a delay or a time lag in a signal. Delay lines are commonly used in digital systems that require precise timing, synchronization, or control of signals.

Delay lines can be passive or active, depending on the method used to introduce the delay in the signal. Passive delay lines use passive components, such as capacitors, inductors, and resistors, to introduce the delay in the signal. Active delay lines use active components, such as amplifiers, to introduce the delay in the signal.

Delay lines can also be fixed or variable, depending on whether the delay introduced in the signal is fixed or can be adjusted. Fixed delay lines introduce a fixed delay in the signal, while variable delay lines can be adjusted to introduce a variable delay in the signal.

Delay lines are often used in digital systems that require precise timing or synchronization between different components or devices. For example, in a memory system, a delay line may be used to ensure that the signals sent to and received from the memory chips are synchronized and aligned with the clock signal.

Delay lines can also be used to compensate for signal propagation delays caused by long transmission lines or cables. In this case, the delay line is used to introduce a delay in the signal to compensate for the delay caused by the transmission line or cable.