Analog Devices Delay Lines 609

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Nominal Total Delay (td)	Surface Mount	No. of Functions	No. of Taps/Steps	Technology	Nominal Output Impedance (Z0)	Programmable Delay Line	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family	Maximum Input Frequency (fmax)
MXD1013-80CWE	Analog Devices	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	80 ns	YES	3	1	TTL		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1		2.65 mm	7.5 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0	20	240	10.3 mm	TTL
MXD1013-35C/D	Analog Devices	SILICON DELAY LINE	COMMERCIAL	NO LEAD	16	DIE	UNSPECIFIED	UNSPECIFIED	35 ns	YES	3	1	TTL		NO	5		UNCASED CHIP				70 Cel	0 Cel	TIN LEAD	UPPER	X-XUUC-N16					Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0				TTL
MXD1005UA75	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	75 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V	70 mA		e0			3 mm	1000
MXD1013-35EPA	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	35 ns	NO	3	1	TTL		NO	5		IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8			4.572 mm	7.62 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.375 mm	TTL
MXD1013-50EWE	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	50 ns	YES	3	1	TTL		NO	5		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1		2.65 mm	7.5 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0	20	240	10.3 mm	TTL
MXD1013-90CWE	Analog Devices	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	90 ns	YES	3	1	TTL		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1		2.65 mm	7.5 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			10.3 mm	TTL
MXD1013-55CWE	Analog Devices	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	55 ns	YES	3	1	TTL		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1		2.65 mm	7.5 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0	20	240	10.3 mm	TTL
MXD1013-30C/D	Analog Devices	SILICON DELAY LINE	COMMERCIAL	NO LEAD	16	DIE	UNSPECIFIED	UNSPECIFIED	30 ns	YES	3	1	TTL		NO	5		UNCASED CHIP				70 Cel	0 Cel	TIN LEAD	UPPER	X-XUUC-N16					Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0				TTL
MXD1013-35CPD	Analog Devices	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	35 ns	NO	3	1	TTL		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14			4.572 mm	7.62 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			19.05 mm	TTL
MXD1013-90EWE	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	90 ns	YES	3	1	TTL		NO	5		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1		2.65 mm	7.5 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			10.3 mm	TTL
MXD1013-90EPA	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	90 ns	NO	3	1	TTL		NO	5		IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8			4.572 mm	7.62 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.375 mm	TTL
MXD1013-70C/D	Analog Devices	SILICON DELAY LINE	COMMERCIAL	NO LEAD	16	DIE	UNSPECIFIED	UNSPECIFIED	70 ns	YES	3	1	TTL		NO	5		UNCASED CHIP				70 Cel	0 Cel	TIN LEAD	UPPER	X-XUUC-N16					Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0				TTL
MXD1013-50C/D	Analog Devices	SILICON DELAY LINE	COMMERCIAL	NO LEAD	16	DIE	UNSPECIFIED	UNSPECIFIED	50 ns	YES	3	1	TTL		NO	5		UNCASED CHIP				70 Cel	0 Cel	TIN LEAD	UPPER	X-XUUC-N16					Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0				TTL
MXD1013-55EWE	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	55 ns	YES	3	1	TTL		NO	5		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1		2.65 mm	7.5 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0	20	240	10.3 mm	TTL
MXD1005C/W60	Analog Devices	SILICON DELAY LINE	COMMERCIAL	NO LEAD	16	DIE	UNSPECIFIED	UNSPECIFIED	60 ns	YES	1	5			NO	5		UNCASED CHIP				70 Cel	0 Cel	TIN LEAD	UPPER	X-XUUC-N16		5.25 V			Not Qualified	TRUE	4.75 V			e0				1000
MXD1013-12EWE	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	12 ns	YES	3	1	TTL		NO	5		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1		2.65 mm	7.5 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0	20	240	10.3 mm	TTL
MXD1013-75C/D	Analog Devices	SILICON DELAY LINE	COMMERCIAL	NO LEAD	16	DIE	UNSPECIFIED	UNSPECIFIED	75 ns	YES	3	1	TTL		NO	5		UNCASED CHIP				70 Cel	0 Cel	TIN LEAD	UPPER	X-XUUC-N16					Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0				TTL
MXD1013-150CWE	Analog Devices	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	150 ns	YES	3	1	TTL		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1		2.65 mm	7.5 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			10.3 mm	TTL
MXD1013-10CPA	Analog Devices	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	10 ns	NO	3	1	TTL		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8			4.572 mm	7.62 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.375 mm	TTL
MXD1013-60CWE	Analog Devices	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	60 ns	YES	3	1	TTL		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1		2.65 mm	7.5 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0	20	240	10.3 mm	TTL
MXD1013-35CPA	Analog Devices	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	35 ns	NO	3	1	TTL		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8			4.572 mm	7.62 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.375 mm	TTL
MXD1013-12CWE	Analog Devices	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	12 ns	YES	3	1	TTL		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1		2.65 mm	7.5 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0	20	240	10.3 mm	TTL
MXD1013-50CPD	Analog Devices	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	50 ns	NO	3	1	TTL		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14			4.572 mm	7.62 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			19.05 mm	TTL
MXD1013-25CPA	Analog Devices	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	25 ns	NO	3	1	TTL		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8			4.572 mm	7.62 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.375 mm	TTL
MXD1013-80CSA	Analog Devices	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	80 ns	YES	3	1	TTL		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0	20	240	4.9 mm	TTL
MXD1013-35CSA	Analog Devices	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	35 ns	YES	3	1	TTL		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0	20	240	4.9 mm	TTL
MXD1013-150EPD	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	150 ns	NO	3	1	TTL		NO	5		IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T14			4.572 mm	7.62 mm	Not Qualified	TRUE			BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			19.05 mm	TTL
DS1135Z-10+T&R	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	3	1		50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	35 mA		e3	30	260	4.9 mm
DS1040H-A15	Analog Devices	PULSE GENERATOR DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	5	CMOS		YES	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	4.57 mm		Not Qualified	COMPLEMENTARY	4.75 V		SILICON PULSE GENERATOR; PULSE WIDTH CHANGE PER STEP = 2.5NS	e0			9.4615 mm	CMOS/TTL	15.3846 MHz
DS1012M-5	Analog Devices		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2	1	CMOS		NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8					Not Qualified			70 mA		e0
DS1012Z-D33	Analog Devices		COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	1	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8					Not Qualified			70 mA		e0
DS1110LE-400+	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	400 ns	YES	1	10	CMOS		NO	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		2.7 V			e3	30	260	5 mm	1110
DS1100LZ-300+T	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	300 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e3			4.9 mm	1100
DS1100U-100+	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	100 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V	50 mA		e3	30	260	3 mm	1100
DS1023S-50+T	Analog Devices	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	140 ns	YES	1	255	CMOS		YES	5	5	SMALL OUTLINE	SOP16,.3	Delay Lines	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	60 mA		e3	30	260	10.3 mm		25 MHz
DS1110LE-500+T&R	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	500 ns	YES	1	10	CMOS		NO	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	3.6 V	1.1 mm	4.4 mm		TRUE	2.7 V			e3	30	260	5 mm	1110
DS1135Z-10+	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	3	1		50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	35 mA		e3	30	260	4.9 mm	1135
DS1100LZ-100+	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	100 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e3	30	260	4.9 mm	1100
DS1135M-5	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	5 ns	NO	1	3			NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	35 mA		e0			9.375 mm
DS1100U-200+	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	200 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V	50 mA		e3	30	260	3 mm	1100
DS1040H-200	Analog Devices	PULSE GENERATOR DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	5	CMOS		YES	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	4.57 mm		Not Qualified	COMPLEMENTARY	4.75 V		SILICON PULSE GENERATOR; PULSE WIDTH CHANGE PER STEP = 40NS; OUTPUT PULSE WIDTH	e0			9.4615 mm	CMOS/TTL	4 MHz
DS1100LU-100+T&R	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	100 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V			e3	30	260	3 mm	1100
DS1003M-20	Analog Devices		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	4	CMOS		NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8					Not Qualified			85 mA		e0
DS1100U-300+	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	300 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8	1	5.25 V	1.1 mm	3 mm	Not Qualified	TRUE	4.75 V	50 mA		e3	30	260	3 mm	1100
DS1012Z-D16	Analog Devices		COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	1	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8					Not Qualified			70 mA		e0
DS1100LU-30+T	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	30 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V			e3	30	260	3 mm	1100
DS1135Z-30+T&R	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	30 ns	YES	3	1		50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	35 mA		e3			4.9 mm
DS1135Z-012	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	12 ns	YES	3	1		50 ohm	NO	5		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V			e0			4.9 mm

Delay Lines

A delay line is an electronic component used in digital systems to introduce a delay or a time lag in a signal. Delay lines are commonly used in digital systems that require precise timing, synchronization, or control of signals.

Delay lines can be passive or active, depending on the method used to introduce the delay in the signal. Passive delay lines use passive components, such as capacitors, inductors, and resistors, to introduce the delay in the signal. Active delay lines use active components, such as amplifiers, to introduce the delay in the signal.

Delay lines can also be fixed or variable, depending on whether the delay introduced in the signal is fixed or can be adjusted. Fixed delay lines introduce a fixed delay in the signal, while variable delay lines can be adjusted to introduce a variable delay in the signal.

Delay lines are often used in digital systems that require precise timing or synchronization between different components or devices. For example, in a memory system, a delay line may be used to ensure that the signals sent to and received from the memory chips are synchronized and aligned with the clock signal.

Delay lines can also be used to compensate for signal propagation delays caused by long transmission lines or cables. In this case, the delay line is used to introduce a delay in the signal to compensate for the delay caused by the transmission line or cable.