Maxim Integrated Delay Lines 2,192

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Nominal Total Delay (td)	Surface Mount	No. of Functions	No. of Taps/Steps	Technology	Nominal Output Impedance (Z0)	Programmable Delay Line	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family	Maximum Input Frequency (fmax)
DS1100LU-125/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	125 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V			e0			3 mm	1100
DS1044R-10	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	4	1	CMOS		NO	5	5	SMALL OUTLINE	SOP14,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14		5.25 V	1.75 mm	3.91 mm	Not Qualified	TRUE	4.75 V	45 mA		e0			8.65 mm	CMOS
DS1007-LPP	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	7	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel		DUAL	R-PDIP-T16		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V						19.175 mm	1007
DS1005M-60+	Maxim Integrated		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR			NO	1	5	CMOS		NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-XDIP-T8	1				Not Qualified			75 mA		e3	30	260
DS1013S-25+T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	125 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	5.25 V	2.67 mm	7.5 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e3	30	260	10.285 mm	CMOS	13.3333 MHz
DS1013M-75+	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	75 ns	NO	3	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDIP-T8	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e3	30	260	9.375 mm	CMOS
DS1100M-45	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	45 ns	NO	1	5	CMOS	50 ohm	NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	50 mA		e0			9.375 mm
DS1044R-14	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	14 ns	YES	4	1	CMOS		NO	5	5	SMALL OUTLINE	SOP14,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14		5.25 V	1.75 mm	3.91 mm	Not Qualified	TRUE	4.75 V	45 mA		e0			8.65 mm	CMOS
DS1035Z-15	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	15 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.91 mm	Not Qualified	TRUE	4.75 V	35 mA		e0			4.88 mm	1035
DS1135LZ-30/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	30 ns	YES	3	1		50 ohm	NO	3.3	3/3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2.7 V	10 mA		e0			4.9 mm	1135
DS1000M-30IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	30 ns	NO	1	5	CMOS		NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA		e0			9.375 mm	1000
DS1100LM-75	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	75 ns	NO	1	5	CMOS	50 ohm	NO	3.3		IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8		3.6 V	4.572 mm	7.62 mm	Not Qualified	TRUE	2.7 V			e0			9.375 mm
DS1005H-200+T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	200 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G8	1	5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e3	30	260	9.4615 mm	CMOS/TTL	3.125 MHz
DS1013M-45	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	45 ns	NO	3	1	CMOS		NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.375 mm	CMOS
DS1013M-070	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	70 ns	NO	3	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.375 mm	CMOS/TTL	4.7619 MHz
DS1013-80	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	80 ns	NO	3	1	CMOS		NO	5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	70 mA		e0			19.05 mm	CMOS
DS1010G-100	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	100 ns	NO	1	10	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			19.05 mm	1010	6.25 MHz
DS1010S-300/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	300 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.67 mm	7.495 mm	Not Qualified	TRUE	4.75 V	150 mA		e0			10.285 mm	1010
DS1100Z-150/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	150 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0			4.9 mm	1100
DS1010S-60	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	60 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	150 mA		e0			10.3 mm	1010
DS1005S-100/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	100 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V			Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0				CMOS/TTL	6.25 MHz
DS1003M	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	24 ns	NO	1	4			NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V			e0			9.375 mm	1000
DS1135Z-12+T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	12 ns	YES	3	1		50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	35 mA		e3	30	260	4.9 mm
DS1000M-125-IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	125 ns	NO	1	5	CMOS		NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA		e0			9.375 mm	CMOS/TTL	5 MHz
DS1013K-40	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	40 ns	NO	3	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			19.05 mm	CMOS	8.33333 MHz
DS1010S-050	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	50 ns	YES	1	10	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel		DUAL	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT		NOT SPECIFIED	NOT SPECIFIED	10.3 mm	CMOS/TTL	12.5 MHz
DS1135LZ-12	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	12 ns	YES	3	1		50 ohm	NO	3.3	3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2.7 V	10 mA		e0			4.9 mm	1135
DS1035M-012	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	12 ns	NO	3	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT	e0			9.375 mm	CMOS/TTL	41.6667 MHz
DS1110S-450	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	450 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	150 mA		e0			10.3 mm
DS1100Z-175/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	175 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0			4.9 mm	1100
DS1013S-150/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	150 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			10.3 mm	CMOS	2.22222 MHz
DS1110S-200	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	200 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	150 mA		e0			10.3 mm
DS1013H-150	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	150 ns	NO	3	1	CMOS		NO	5	5	IN-LINE	GWDIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.375 mm	CMOS	2.22222 MHz
DS1110LE-60	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	60 ns	YES	1	10	CMOS		NO	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		2.7 V			e0		245	5 mm	1110
DS1100LU-60/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	60 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	TRUE	3 V			e0			3 mm	1100
DS1010(DIE)-350	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	NO LEAD		DIE	UNSPECIFIED	UNSPECIFIED	350 ns	YES	1	10	CMOS		NO	5		UNCASED CHIP				85 Cel	-40 Cel	TIN LEAD	UPPER	X-XUUC-N		5.25 V			Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0				CMOS/TTL	1.78571 MHz
DS1040M-A20	Maxim Integrated	PULSE GENERATOR DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	5	CMOS		YES	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	75 mA	SILICON PULSE GENERATOR; PULSE WIDTH CHANGE PER STEP = 2.5NS	e0			9.375 mm	CMOS/TTL	14.2857 MHz
DS1033Z-80	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	8 ns	YES	3	1			NO	3.3		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel		DUAL	R-PDSO-G8		3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2.7 V						4.9 mm	1000
DS1004Z-2	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	13 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	75 mA	INPUT TO 1ST TAP DELAY = 5NS	e0		245	4.9 mm	CMOS	48.0769 MHz
DS1007S-1+	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	18 ns	YES	7	1	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	5.25 V	2.67 mm	7.495 mm	Not Qualified	TRUE	4.75 V	70 mA		e3	30	260	10.285 mm	1007
DS1100Z-50/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	50 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0		245	4.9 mm	1100
DS1010S-50/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	50 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	150 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0		245	10.3 mm	1010	12.5 MHz
DS1110E-80+	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	80 ns	YES	1	10	CMOS		NO	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G14	1	5.25 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.75 V			e3	30	260	5 mm
DS1000H-30	Maxim Integrated		COMMERCIAL	GULL WING	8	SOP	RECTANGULAR			YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	GWDIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDSO-G8					Not Qualified			75 mA		e0
DS1010	Maxim Integrated	SILICON DELAY LINE		THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	10	CMOS		NO	5		IN-LINE			2.54 mm			TIN LEAD	DUAL	R-PDIP-T14			4.572 mm	7.62 mm	Not Qualified	TRUE				e0			19.05 mm	1000
DS1005G-125	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	125 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	GWDIP14,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G14		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V	75 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			12.695 mm	CMOS/TTL	5 MHz
DS1100M-300	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	300 ns	NO	1	5	CMOS	50 ohm	NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	50 mA		e0		245	9.375 mm
DS1033Z-25T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	25 ns	YES	3	1	CMOS		NO	3.3		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2.7 V			e0			4.9 mm	CMOS/TTL	20 MHz

Delay Lines

A delay line is an electronic component used in digital systems to introduce a delay or a time lag in a signal. Delay lines are commonly used in digital systems that require precise timing, synchronization, or control of signals.

Delay lines can be passive or active, depending on the method used to introduce the delay in the signal. Passive delay lines use passive components, such as capacitors, inductors, and resistors, to introduce the delay in the signal. Active delay lines use active components, such as amplifiers, to introduce the delay in the signal.

Delay lines can also be fixed or variable, depending on whether the delay introduced in the signal is fixed or can be adjusted. Fixed delay lines introduce a fixed delay in the signal, while variable delay lines can be adjusted to introduce a variable delay in the signal.

Delay lines are often used in digital systems that require precise timing or synchronization between different components or devices. For example, in a memory system, a delay line may be used to ensure that the signals sent to and received from the memory chips are synchronized and aligned with the clock signal.

Delay lines can also be used to compensate for signal propagation delays caused by long transmission lines or cables. In this case, the delay line is used to introduce a delay in the signal to compensate for the delay caused by the transmission line or cable.