DIP Digital Arithmetic Circuits 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LS385N1	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL							IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20				Not Qualified
SN74AS181NP1	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL							IN-LINE	DIP24,.6			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T24				Not Qualified
SN74LS280N3	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL		9		5	5		IN-LINE	DIP14,.3	50 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T14	5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V		ODD/EVEN PARITY GENERATOR		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
SN74283NP1	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL				5	5		IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16				Not Qualified
SN7480N	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL		1		5		15 pF	IN-LINE	DIP14,.3	80 ns		Other Logic ICs	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T14	5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	35 mA	FULL ADDER; 4-IN GATED A/B OPERANDS; COMPLEMENTARY SUM OUTPUTS; PERMITS RIPPLE CARRY CASCADING		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
SN74AS286NP3	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL				5	5		IN-LINE	DIP14,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T14
SN74HC632NP1	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	INDUSTRIAL	THROUGH-HOLE	52	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS							IN-LINE	DIP52,.6			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T52				Not Qualified
SN74182J-00	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	TTL		4		5		15 pF	IN-LINE		22 ns			2.54 mm	70 Cel		0 Cel		DUAL	R-GDIP-T16	5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	72 mA	WITH HIGHER ORDER LOOKAHEAD				19.56 mm	TTL/H/L
SN74LS681JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO		TTL							IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T20
74ACT11286NE4	Texas Instruments	PARITY GENERATOR/CHECKER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS		9		5	5	50 pF	IN-LINE	DIP14,.3	12 ns		Arithmetic Circuits	2.54 mm	85 Cel	3-STATE	-40 Cel		DUAL	R-PDIP-T14	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		EVEN PARITY GENERATOR; ODD/EVEN PARITY CHECKER; WITH PARITY I/O AND ACTIVE LOW PARITY ERROR OUTPUT		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	ACT
SN74LS181N-10	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL		4		5		15 pF	IN-LINE		62 ns			2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T24	5.25 V	5.08 mm	15.24 mm	Not Qualified		4.75 V	37 mA	CAPABLE OF 16 LOGIC & ARITHMETIC OPERATIONS				31.75 mm	LS
SN74LS381NP1	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL							IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20				Not Qualified
SN74AS264NP1	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL							IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16				Not Qualified
SN74HC181NT3	Texas Instruments	ARITHMETIC LOGIC UNIT	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS					2/6		IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T24
SN74HC283JP4	Texas Instruments	ADDER/SUBTRACTOR	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO		CMOS					2/6		IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T16
SN74LS685N3	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL				5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20
SN74S182N	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL		4		5		15 pF	IN-LINE	DIP16,.3	10.5 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16	5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	109 mA	WITH HIGHER ORDER LOOKAHEAD		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	S
SN74HC678NT3	Texas Instruments	ADDRESS COMPARATOR	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS							IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T24
SN74AS181ANW3	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL							IN-LINE	DIP24,.6			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T24
SN74AS280N-10	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL		9		5			IN-LINE					2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T14	5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V		ODD/EVEN PARITY GENERATOR				19.305 mm	AS
5962-8857801RX	Texas Instruments	IDENTITY COMPARATOR	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	TTL	MIL-STD-883	8		5		50 pF	IN-LINE		25 ns			2.54 mm	125 Cel		-55 Cel		DUAL	R-GDIP-T20	5.5 V	5.08 mm	7.62 mm	Qualified	INVERTED	4.5 V	19 mA			NOT SPECIFIED	NOT SPECIFIED	24.195 mm	ALS
SN74S280J-00	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	TTL		9		5		15 pF	IN-LINE		18 ns			2.54 mm	70 Cel		0 Cel		DUAL	R-GDIP-T14	5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	105 mA	ODD/EVEN PARITY GENERATOR				19.56 mm	S
SN74ALS522J	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO		TTL				5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T20				Not Qualified
SN74HC181JT	Texas Instruments	ARITHMETIC LOGIC UNIT	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO		CMOS					2/6		IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T24				Not Qualified
SN74181NP1	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL				5	5		IN-LINE	DIP24,.6			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T24				Not Qualified
SN74ALS522N1	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL				5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20				Not Qualified
CD74HC85E	Texas Instruments	MAGNITUDE COMPARATOR	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS		4	TUBE	4.5	2/6	50 pF	IN-LINE	DIP16,.3	295 ns	5.2 Amp	Arithmetic Circuits	2.54 mm	125 Cel		-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16	6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V	.08 mA	CASCADABLE, THREE POSSIBLE OUTPUTS ARE A<B, A=B AND A>B	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	HC/UH
SN74AS181ANW	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL		4		5		15 pF	IN-LINE	DIP24,.6	21 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T24	5.5 V			Not Qualified		4.5 V	200 mA	CAPABLE OF 16 LOGIC & ARITHMETIC OPERATIONS; INTERNAL CARRY AND HIGHER ORDER LOOKAHEAD		NOT SPECIFIED	NOT SPECIFIED		AS
SN74ALS521NE4	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL		8		5	5	50 pF	IN-LINE	DIP20,.3	20 ns		Arithmetic Circuits	2.54 mm	70 Cel	3-STATE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T20	5.5 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	4.5 V	19 mA	WITH PULL-UP RESISTORS ON Q INPUTS; CASCADABLE	e4			25.4 mm	ALS
SN74HC147N-00	Texas Instruments	ENCODER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS		9		5			IN-LINE		240 ns			2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T16	6 V	5.08 mm	7.62 mm	Not Qualified		2 V		9 TO 4 LINE PRIORITY ENCODER				19.305 mm	HC/UH
SN74HC632JDP4	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	INDUSTRIAL	THROUGH-HOLE	52	DIP	RECTANGULAR	CERAMIC	NO		CMOS							IN-LINE	DIP52,.6			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T52
SN74AS280NP1	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL				5	5		IN-LINE	DIP14,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T14				Not Qualified
SN74LS637NP1	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL							IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20				Not Qualified
SN74HC679J4	Texas Instruments	ADDRESS COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO		CMOS							IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T20
SN74ALS634JD-00	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	COMMERCIAL	THROUGH-HOLE	48	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	1	TTL		32		5			IN-LINE		58 ns				70 Cel	3-STATE	0 Cel		DUAL	R-CDIP-T48	5.5 V			Not Qualified		4.5 V	250 mA	BUILT IN DIAGNOSTICS					ALS
SN74AS866NP1	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL							IN-LINE	DIP28,.6			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T28				Not Qualified
SN74F520N3	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL				5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20
SN74LS261J	Texas Instruments	MULTIPLIER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	TTL		4		5		15 pF	IN-LINE	DIP16,.3	37 ns		Other Logic ICs	2.54 mm	70 Cel		0 Cel		DUAL	R-GDIP-T16	5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	40 mA	2'S COMPLEMENT RECODE MULTIPLIER; PRODUCT RECODED AS BASE-4 NUMBER; LATCHED OUTPUTS		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
SN74184N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL				5	5		IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16
SN74ALS522N3	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL				5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20
SN74AS881ANT3	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL							IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T24
SN74S275N	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL							IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16				Not Qualified
SN74LS685N	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL		8		5	5	45 pF	IN-LINE	DIP20,.3	35 ns		Arithmetic Circuits	2.54 mm	70 Cel	OPEN-COLLECTOR	0 Cel		DUAL	R-PDIP-T20	5.5 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	4.5 V	65 mA	WITH A = B & A > B OUTPUTS		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	LS
74ACT11286J	Texas Instruments	PARITY GENERATOR/CHECKER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO		CMOS				5	5		IN-LINE	DIP14,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T14				Not Qualified
SN74148N-10	Texas Instruments	ENCODER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL		8		5		15 pF	IN-LINE		25 ns			2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16	5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	60 mA	8 TO 3 LINE PRIORITY ENCODER				19.305 mm	TTL/H/L
SN74LS688NP1	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL				5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20				Not Qualified
SN74148NP1	Texas Instruments	ENCODER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL				5	5		IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16				Not Qualified
SN74LS181JP4	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO		TTL				5	5		IN-LINE	DIP24,.6			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T24

Digital Arithmetic Circuits

Digital arithmetic circuits are electronic circuits designed to perform arithmetic operations on digital signals. These circuits are essential components of digital systems, such as microprocessors, digital signal processors, and programmable logic devices.

Digital arithmetic circuits can perform various arithmetic operations, including addition, subtraction, multiplication, division, and modulo arithmetic. These operations are performed using binary arithmetic, where numbers are represented using the binary number system (0s and 1s).

Adders are one of the most commonly used digital arithmetic circuits. They are used to perform binary addition, where two binary numbers are added to produce a sum. Adders can be designed using various techniques, including ripple carry adders, carry look-ahead adders, and carry select adders.

Subtractors are also commonly used digital arithmetic circuits. They are used to perform binary subtraction, where one binary number is subtracted from another to produce a difference. Subtractors can be designed using techniques, including ripple borrow subtractors, borrow look-ahead subtractors, and borrow select subtractors.

Multiplexers and demultiplexers are digital circuits that can be used for various arithmetic operations, such as multiplication and division. Multiplexers can be used to select one of several input signals based on a control signal, while demultiplexers can be used to distribute a single input signal to several outputs based on a control signal.

Digital arithmetic circuits can also be designed using programmable logic devices, such as field-programmable gate arrays (FPGAs) and complex programmable logic devices (CPLDs). These devices can be programmed to implement various arithmetic operations and can be reprogrammed to adapt to changing system requirements.