RECTANGULAR Digital Arithmetic Circuits 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LS283DR	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	TTL	4		5	5	15 pF	SMALL OUTLINE	SOP16,.25	24 ns		Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	39 mA	FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADING		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
SN74AS282JP4	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO		TTL						IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T20
SN74HC677JT4	Texas Instruments	ADDRESS COMPARATOR	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO		CMOS						IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T24
CD74AC280E	Texas Instruments	PARITY GENERATOR/CHECKER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS	9	TUBE	3.3	3.3/5	50 pF	IN-LINE	DIP14,.3	263 ns	75 Amp	Arithmetic Circuits	2.54 mm	125 Cel		-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	1.5 V	.08 mA	ODD/EVEN PARITY GENERATOR	e4			19.305 mm	AC
SN74F280AN	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL			5	5		IN-LINE	DIP14,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T14					Not Qualified
SN74AS286J4	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO		TTL			5	5		IN-LINE	DIP14,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T14
SN74S182NP1	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL						IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16					Not Qualified
SN74HC382J4	Texas Instruments	ARITHMETIC LOGIC UNIT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO		CMOS						IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T20
SN74ALS8400JD	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	COMMERCIAL	THROUGH-HOLE	48	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	1	TTL	16		5			IN-LINE	DIP48,.6			Arithmetic Circuits	2.54 mm	70 Cel	3-STATE	0 Cel		DUAL	R-CDIP-T48					Not Qualified						NOT SPECIFIED	NOT SPECIFIED		ALS
SN74HC632JD4	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	INDUSTRIAL	THROUGH-HOLE	52	DIP	RECTANGULAR	CERAMIC	NO		CMOS						IN-LINE	DIP52,.6			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T52
SN74HC181NTP3	Texas Instruments	ARITHMETIC LOGIC UNIT	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS				2/6		IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T24
SN74HC680NP1	Texas Instruments	ADDRESS COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS						IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T20					Not Qualified
SN74ALS29809DWP3	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		TTL						SMALL OUTLINE	SOP24,.4			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G24
SN74ALS527DW3	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		TTL						SMALL OUTLINE	SOP20,.4			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20
SN74LS147N	Texas Instruments	ENCODER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL	9		5	5	15 pF	IN-LINE	DIP16,.3	33 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	4.75 V	20 mA	10 TO 4 LINE PRIORITY ENCODER		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
SN74AS280N3	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL	9		5	5	50 pF	IN-LINE	DIP14,.3	12 ns		Arithmetic Circuits	2.54 mm	70 Cel	3-STATE	0 Cel		DUAL	R-PDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V	35 mA	ODD/EVEN PARITY GENERATOR		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	AS
SN74LS280J	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	TTL	9		5	5	15 pF	IN-LINE	DIP14,.3	50 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-GDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	27 mA	ODD/EVEN PARITY GENERATOR		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
SN74HC679DW-00	Texas Instruments	ADDRESS COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	12		5		50 pF	SMALL OUTLINE		200 ns			1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	2 V		WITH INHIBIT				12.8 mm	HC/UH
SN74HC632N	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	INDUSTRIAL	THROUGH-HOLE	52	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS						IN-LINE	DIP52,.6			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T52					Not Qualified
SN74S274N-10	Texas Instruments	MULTIPLIER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL	4		5			IN-LINE		70 ns			2.54 mm	70 Cel	3-STATE	0 Cel		DUAL	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V						24.325 mm	S
SN74284N-10	Texas Instruments	MULTIPLIER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL	4		5		30 pF	IN-LINE		60 ns			2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	130 mA	4X4 PARALLEL MULTIPLIER WITH MS NIBBLE OUTPUT OF PRODUCT				19.305 mm	TTL/H/L
SN74ALS688J4	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO		TTL			5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T20
SN74147N-10	Texas Instruments	ENCODER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL	9		5		15 pF	IN-LINE		19 ns			2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	70 mA	9 TO 4 LINE PRIORITY ENCODER				19.305 mm	TTL/H/L
CD4532BEE4	Texas Instruments	ENCODER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS	8	TUBE	5	5/15	50 pF	IN-LINE	DIP16,.3	440 ns	1.5 Amp	Arithmetic Circuits	2.54 mm	125 Cel		-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		18 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	3 V	3 mA	8 TO 3 LINE PRIORITY ENCODER	e4			19.305 mm	4000/14000/40000
SN74F280BNSRE4	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	TTL	9		5	5		SMALL OUTLINE	SOP14,.3	11 ns		Arithmetic Circuits	1.27 mm	70 Cel		0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	10.2 mm	F/FAST
74AC11520DW	Texas Instruments	IDENTITY COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	8		5	3.3/5	50 pF	SMALL OUTLINE	SOP20,.4	11.3 ns		Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	3 V		WITH PULL-UP RESISTORS ON B INPUTS; CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	AC
SN74AS881NT1	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL						IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T24					Not Qualified
SN74HC630N	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS						IN-LINE	DIP28,.6			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T28					Not Qualified
SN74LS685JP4	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO		TTL			5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T20
SN74LS261N-10	Texas Instruments	MULTIPLIER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL	4		5		15 pF	IN-LINE		37 ns			2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	40 mA	2'S COMPLEMENT RECODE MULTIPLIER				19.305 mm	LS
SN74F350D-00R	Texas Instruments	SHIFTER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	TTL	4		5			SMALL OUTLINE		6.5 ns			1.27 mm	70 Cel	3-STATE	0 Cel		DUAL	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V		THREE LINKING INPUTS FOR EXPANSION				9.9 mm	F/FAST
SN74185ANP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL			5	5		IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16
SN7485N	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL	4		5	5	15 pF	IN-LINE	DIP16,.3	35 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	88 mA	CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
SN74HC677NT3	Texas Instruments	ADDRESS COMPARATOR	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS						IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T24
SN7485J	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	TTL	4		5	5	15 pF	IN-LINE	DIP16,.3	30 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-GDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	88 mA	CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	TTL/H/L
CD74AC283EE4	Texas Instruments	ADDER/SUBTRACTOR	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS	4		3	3.3/5		IN-LINE	DIP16,.3	228 ns		Arithmetic Circuits	2.54 mm	125 Cel		-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	1.5 V		FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD	e4			19.305 mm	AC
SN74L85N3	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL						IN-LINE	DIP14,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T14
SN74S275NP1	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL						IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16					Not Qualified
SN7483AN-00	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL	4		5		15 pF	IN-LINE		24 ns			2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	110 mA	FULL ADDER				19.305 mm	TTL/H/L
SN74AS882ADWP3	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		TTL						SMALL OUTLINE	SOP24,.4			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G24
CD74HC147NSR	Texas Instruments	ENCODER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	9		4.5	2/6		SMALL OUTLINE	SOP16,.3	240 ns		Arithmetic Circuits	1.27 mm	125 Cel		-55 Cel		DUAL	R-PDSO-G16		6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		9 TO 4 LINE PRIORITY ENCODER		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	HC/UH
SN7480N-10	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL	1		5		15 pF	IN-LINE		80 ns			2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	35 mA	FULL ADDER				19.305 mm	TTL/H/L
SN74182N-10	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	1	TTL	4		5		15 pF	FLATPACK		22 ns				70 Cel		0 Cel		DUAL	R-GDFP-F16		5.25 V			Not Qualified		4.75 V	72 mA	WITH HIGHER ORDER LOOKAHEAD					TTL/H/L
SN74LS630N	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL	16		5		45 pF	IN-LINE	DIP28,.6	65 ns		Arithmetic Circuits	2.54 mm	70 Cel	3-STATE	0 Cel		DUAL	R-PDIP-T28		5.25 V	5.08 mm	15.24 mm	Not Qualified		4.75 V	230 mA			NOT SPECIFIED	NOT SPECIFIED	36.32 mm	LS
SN7483AN	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL	4		5	5	15 pF	IN-LINE	DIP16,.3	24 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	110 mA	FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; CENTER VCC AND GND; PERMITS RIPPLE CARRY CASCADING		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
SN74S281J-00	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	TTL	4		5		15 pF	IN-LINE		45 ns				70 Cel		0 Cel		DUAL	R-GDIP-T24		5.25 V			Not Qualified		4.75 V	230 mA	BINARY ACCUMULATOR; WITH INTERNAL CARRY LOOKAHEAD AND HIGHER ORDER LOOKAHEAD					S
SN74ALS526JP4	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO		TTL						IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T20
SN74HC678NT	Texas Instruments	ADDRESS COMPARATOR	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS						IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T24					Not Qualified

Digital Arithmetic Circuits

Digital arithmetic circuits are electronic circuits designed to perform arithmetic operations on digital signals. These circuits are essential components of digital systems, such as microprocessors, digital signal processors, and programmable logic devices.

Digital arithmetic circuits can perform various arithmetic operations, including addition, subtraction, multiplication, division, and modulo arithmetic. These operations are performed using binary arithmetic, where numbers are represented using the binary number system (0s and 1s).

Adders are one of the most commonly used digital arithmetic circuits. They are used to perform binary addition, where two binary numbers are added to produce a sum. Adders can be designed using various techniques, including ripple carry adders, carry look-ahead adders, and carry select adders.

Subtractors are also commonly used digital arithmetic circuits. They are used to perform binary subtraction, where one binary number is subtracted from another to produce a difference. Subtractors can be designed using techniques, including ripple borrow subtractors, borrow look-ahead subtractors, and borrow select subtractors.

Multiplexers and demultiplexers are digital circuits that can be used for various arithmetic operations, such as multiplication and division. Multiplexers can be used to select one of several input signals based on a control signal, while demultiplexers can be used to distribute a single input signal to several outputs based on a control signal.

Digital arithmetic circuits can also be designed using programmable logic devices, such as field-programmable gate arrays (FPGAs) and complex programmable logic devices (CPLDs). These devices can be programmed to implement various arithmetic operations and can be reprogrammed to adapt to changing system requirements.