COMMERCIAL Digital Arithmetic Circuits 1,658

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74AS882ADW	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL	8		5		50 pF	SMALL OUTLINE	SOP24,.4	14 ns		Arithmetic Circuits	1.27 mm	70 Cel			DUAL	R-PDSO-G24		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V	70 mA	WITH HIGHER ORDER LOOKAHEAD		NOT SPECIFIED	NOT SPECIFIED	15.4 mm	AS
SN74ALS632BFNR	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	COMMERCIAL	J BEND	68	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1	TTL	32		5		50 pF	CHIP CARRIER		37 ns			1.27 mm	70 Cel	3-STATE		QUAD	S-PQCC-J68		5.5 V	4.57 mm	24.2316 mm	Not Qualified		4.5 V	250 mA	BUILT IN DIAGNOSTICS; BYTE CONTROL				24.2316 mm	ALS
SN74S280NSR	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL	9		5	5		SMALL OUTLINE	SOP14,.3	50 ns		Arithmetic Circuits	1.27 mm	70 Cel			DUAL	R-PDSO-G14		5.25 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.75 V		ODD/EVEN PARITY GENERATOR		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	S
SN74AS885DWRE4	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL	8		5	5	50 pF	SMALL OUTLINE	SOP24,.4	15 ns		Arithmetic Circuits	1.27 mm	70 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	210 mA	B PORT WITH STANDARD INPUTS; WITH ARITHMETIC COMPARISON; WITH A < B & A > B OUTPUTS	e4	30	260	15.4 mm	AS
SN74AS885DWE4	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL	8		5	5	50 pF	SMALL OUTLINE	SOP24,.4	15 ns		Arithmetic Circuits	1.27 mm	70 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	210 mA	B PORT WITH STANDARD INPUTS; WITH ARITHMETIC COMPARISON; WITH A < B & A > B OUTPUTS	e4	30	260	15.4 mm	AS
SN74ALS29809NTP3	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL						IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-PDIP-T24
SN74F520DW-00R	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL	8		5			SMALL OUTLINE		10.3 ns			1.27 mm	70 Cel			DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	4.5 V		WITH PULLUP RESISTORS ON Q INPUTS				12.8 mm	F/FAST
SN74LS636DW	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL	8		5		45 pF	SMALL OUTLINE	SOP20,.4			Arithmetic Circuits	1.27 mm	70 Cel	3-STATE		DUAL	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	160 mA			NOT SPECIFIED	NOT SPECIFIED	12.8 mm	LS
SN74AS282N3	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL						IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-PDIP-T20
SN74ALS521NP3	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL			5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-PDIP-T20
SN74LS283N3	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	TTL	4		5	5		IN-LINE	DIP16,.3	24 ns		Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V		FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADING		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
SN74LS689J	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	TTL	8		5	5	45 pF	IN-LINE	DIP20,.3	35 ns		Arithmetic Circuits	2.54 mm	70 Cel	OPEN-COLLECTOR		DUAL	R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	4.5 V	65 mA	CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	LS
SN74ALS527N-10	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	TTL	12		5			IN-LINE					2.54 mm	70 Cel			DUAL	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	4.5 V		8 FUSE-PROGRAMMABLE AND 4 CONVENTIONAL INPUTS FOR PORT B; CASCADABLE				24.325 mm	ALS
SN74ALS689DW3	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES		TTL			5	5		SMALL OUTLINE	SOP20,.4			Arithmetic Circuits	1.27 mm	70 Cel			DUAL	R-PDSO-G20
SN74F280BNSRG4	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL	9		5	5		SMALL OUTLINE	SOP14,.3	11 ns		Arithmetic Circuits	1.27 mm	70 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	10.2 mm	F/FAST
SN74ALS521DWP3	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES		TTL			5	5		SMALL OUTLINE	SOP20,.4			Arithmetic Circuits	1.27 mm	70 Cel			DUAL	R-PDSO-G20
SN74S85N	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	TTL	4	TUBE	5	5	15 pF	IN-LINE	DIP16,.3	18 ns	20 Amp	Arithmetic Circuits	2.54 mm	70 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	110 mA	CASCADABLE	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	S
SN74ALS680FN3	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES		TTL						CHIP CARRIER	LDCC20,.4SQ			Arithmetic Circuits	1.27 mm	70 Cel			QUAD	S-PQCC-J20
SN74ALS677ANT3	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL						IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-PDIP-T24
SN74ALS679FN3	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES		TTL						CHIP CARRIER	LDCC20,.4SQ			Arithmetic Circuits	1.27 mm	70 Cel			QUAD	S-PQCC-J20
SN74ALS518J4	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO		TTL			5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-XDIP-T20
SN74S350JP4	Texas Instruments	SHIFTER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO		TTL			5	5		IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-XDIP-T16
SN74LS83AN3	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL			5	5		IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-PDIP-T16
SN74LS685NP1	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL			5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-PDIP-T20					Not Qualified
SN74LS385DW3	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES		TTL						SMALL OUTLINE	SOP20,.4			Arithmetic Circuits	1.27 mm	70 Cel			DUAL	R-PDSO-G20
SN74LS688N	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	YES	NO	1	TTL	8	TUBE	5	5	45 pF	IN-LINE	DIP20,.3	23 ns	24 Amp	Arithmetic Circuits	2.54 mm	70 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	4.85 V	65 mA	CASCADABLE	e4	NOT SPECIFIED	NOT SPECIFIED	25.4 mm	LS
SN74S275N1	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL						IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-PDIP-T16					Not Qualified
SN74AS882FN3	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY		YES		TTL						CHIP CARRIER	LDCC28,.5SQ			Arithmetic Circuits	1.27 mm	70 Cel			QUAD	S-PQCC-J28
SN74S182J4	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO		TTL						IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-XDIP-T16
SN74ALS632JD	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	COMMERCIAL	THROUGH-HOLE	52	DIP	RECTANGULAR	CERAMIC		NO		TTL						IN-LINE	DIP52,.6			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-XDIP-T52					Not Qualified
SN74ALS678NT1	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL						IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-PDIP-T24					Not Qualified
SN74LS280JP4	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO		TTL			5	5		IN-LINE	DIP14,.3			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-XDIP-T14
SN74F350D-00	Texas Instruments	SHIFTER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL	4		5			SMALL OUTLINE		6.5 ns			1.27 mm	70 Cel	3-STATE		DUAL	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V		THREE LINKING INPUTS FOR EXPANSION				9.9 mm	F/FAST
SN74LS685NP3	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL			5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-PDIP-T20
SN74LS631N3	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL						IN-LINE	DIP28,.6			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-PDIP-T28
SN74F519DW-00	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL	8		5			SMALL OUTLINE		10 ns			1.27 mm	70 Cel	OPEN-COLLECTOR		DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V		CASCADABLE				12.8 mm	F/FAST
SN74ALS633JDP4	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	COMMERCIAL	THROUGH-HOLE	52	DIP	RECTANGULAR	CERAMIC		NO		TTL						IN-LINE	DIP52,.6			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-XDIP-T52
SN74LS85FN3	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES		TTL			5	5		CHIP CARRIER	LDCC20,.4SQ			Arithmetic Circuits	1.27 mm	70 Cel			QUAD	S-PQCC-J20
SN7482NP1	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL			5	5		IN-LINE	DIP14,.3			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-PDIP-T14					Not Qualified
SN74F382DW	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL	4		5	5	50 pF	SMALL OUTLINE	SOP20,.4	11 ns		Arithmetic Circuits	1.27 mm	70 Cel			DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V	81 mA	CAPABLE OF 3 LOGIC & ARITHMETIC OPERATIONS; INTERNAL CARRY LOOKAHEAD		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	F/FAST
SN74184J-00	Texas Instruments	ENCODER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	TTL	5		5		15 pF	IN-LINE		35 ns			2.54 mm	70 Cel	OPEN-COLLECTOR		DUAL	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	99 mA	BINARY TO BCD CONVERTER				19.56 mm	TTL/H/L
SN74AS882ADWR	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL	8		5		50 pF	SMALL OUTLINE	SOP24,.4	14 ns		Arithmetic Circuits	1.27 mm	70 Cel			DUAL	R-PDSO-G24		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V	70 mA	WITH HIGHER ORDER LOOKAHEAD		NOT SPECIFIED	NOT SPECIFIED	15.4 mm	AS
SN74ALS6310DWR	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL	10		5			SMALL OUTLINE		18 ns			1.27 mm	70 Cel			DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V						12.8 mm	ALS
SN74LS381AN3	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL						IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-PDIP-T20
SN74LS689DWR	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL	8		5		45 pF	SMALL OUTLINE		35 ns			1.27 mm	70 Cel	OPEN-COLLECTOR		DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	4.5 V	65 mA	CASCADABLE				12.8 mm	LS
SN74278NP3	Texas Instruments	ENCODER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL						IN-LINE	DIP14,.3			Arithmetic Circuits	2.54 mm	70 Cel			DUAL	R-PDIP-T14
SN74ALS518N	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	TTL	8	TUBE	5	5	50 pF	IN-LINE	DIP20,.3	33 ns	24 Amp	Arithmetic Circuits	2.54 mm	70 Cel	OPEN-COLLECTOR	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	17 mA	WITH PULL-UP RESISTORS ON Q INPUTS; CASCADABLE	e4	NOT SPECIFIED	NOT SPECIFIED	25.4 mm	ALS
SN74AS632AN	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	COMMERCIAL	THROUGH-HOLE	52	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	TTL	32		5		50 pF	IN-LINE	DIP52,.6	24 ns		Arithmetic Circuits	2.54 mm	70 Cel	3-STATE		DUAL	R-PDIP-T52		5.5 V	5.08 mm	15.24 mm	Not Qualified		4.5 V	330 mA	BUILT IN DIAGNOSTICS; BYTE CONTROL		NOT SPECIFIED	NOT SPECIFIED	66.55 mm	AS

Digital Arithmetic Circuits

Digital arithmetic circuits are electronic circuits designed to perform arithmetic operations on digital signals. These circuits are essential components of digital systems, such as microprocessors, digital signal processors, and programmable logic devices.

Digital arithmetic circuits can perform various arithmetic operations, including addition, subtraction, multiplication, division, and modulo arithmetic. These operations are performed using binary arithmetic, where numbers are represented using the binary number system (0s and 1s).

Adders are one of the most commonly used digital arithmetic circuits. They are used to perform binary addition, where two binary numbers are added to produce a sum. Adders can be designed using various techniques, including ripple carry adders, carry look-ahead adders, and carry select adders.

Subtractors are also commonly used digital arithmetic circuits. They are used to perform binary subtraction, where one binary number is subtracted from another to produce a difference. Subtractors can be designed using techniques, including ripple borrow subtractors, borrow look-ahead subtractors, and borrow select subtractors.

Multiplexers and demultiplexers are digital circuits that can be used for various arithmetic operations, such as multiplication and division. Multiplexers can be used to select one of several input signals based on a control signal, while demultiplexers can be used to distribute a single input signal to several outputs based on a control signal.

Digital arithmetic circuits can also be designed using programmable logic devices, such as field-programmable gate arrays (FPGAs) and complex programmable logic devices (CPLDs). These devices can be programmed to implement various arithmetic operations and can be reprogrammed to adapt to changing system requirements.