INDUSTRIAL Digital Arithmetic Circuits 1,081

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74AC11286DR	Texas Instruments	PARITY GENERATOR/CHECKER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	9		5	3.3/5	50 pF	SMALL OUTLINE	SOP14,.25	10.7 ns		Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V		EVEN PARITY GENERATOR; ODD/EVEN PARITY CHECKER; WITH PARITY I/O AND ACTIVE LOW PARITY ERROR OUTPUT		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	AC
SN74HC382J	Texas Instruments	ARITHMETIC LOGIC UNIT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO		CMOS						IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T20					Not Qualified
SN74HC682N-10	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS	8		5		50 pF	IN-LINE		344 ns			2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T20		6 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	2 V		WITH PULLUP RESISTORS ON B INPUTS				24.325 mm	HC/UH
SN74HC147FH4	Texas Instruments	ENCODER	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES		CMOS				2/6		CHIP CARRIER	LCC20,.35SQ			Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		QUAD	S-XQCC-N20
SN74HC678DW-00	Texas Instruments	ADDRESS COMPARATOR	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	16		5		50 pF	SMALL OUTLINE		156 ns			1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G24		6 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	2 V		WITH OUTPUT LATCH				15.4 mm	HC/UH
SN74HC180FN3	Texas Instruments	PARITY GENERATOR/CHECKER	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		CMOS						CHIP CARRIER	LDCC20,.4SQ			Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		QUAD	S-PQCC-J20
SN74HC882NT3	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS						IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T24
SN74HC280D3	Texas Instruments	PARITY GENERATOR/CHECKER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		CMOS				2/6		SMALL OUTLINE	SOP14,.25			Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G14
SN74HC148D-00	Texas Instruments	ENCODER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	8		5		50 pF	SMALL OUTLINE		45 ns			1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified		2 V		8 TO 3 LINE PRIORITY ENCODER; CASCADABLE; WITH GROUP SELECT OUTPUT				9.9 mm	HC/UH
SN74HC688DWR-00	Texas Instruments	IDENTITY COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	8		5		50 pF	SMALL OUTLINE		53 ns			1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	2 V		CASCADABLE				12.8 mm	HC/UH
SN74HC882JT	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO		CMOS						IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T24					Not Qualified
SN74HC280N3	Texas Instruments	PARITY GENERATOR/CHECKER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS				2/6		IN-LINE	DIP14,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T14
74ACT11521DWR	Texas Instruments	IDENTITY COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	8		5	5	50 pF	SMALL OUTLINE	SOP20,.4	13.6 ns		Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	4.5 V		CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ACT
SN74HC148NE4	Texas Instruments	ENCODER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS	8		5	2/6		IN-LINE	DIP16,.3	240 ns		Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	2 V		8 TO 3 LINE PRIORITY ENCODER; CASCADABLE; WITH GROUP SELECT OUTPUT	e4			19.305 mm	HC/UH
SN74HC682J	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO		CMOS				2/6		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T20					Not Qualified
SN74HC85AN-10	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS	4		5		50 pF	IN-LINE		290 ns			2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V		CASCADABLE				19.305 mm	HC/UH
SN74HC283D3	Texas Instruments	ADDER/SUBTRACTOR	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		CMOS				2/6		SMALL OUTLINE	SOP16,.25			Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16
SN74HC680JP4	Texas Instruments	ADDRESS COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO		CMOS						IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T20
SN74HC881NTP3	Texas Instruments	ARITHMETIC LOGIC UNIT	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS						IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T24
SN74HC147DW	Texas Instruments	ENCODER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		CMOS				2/6		SMALL OUTLINE	SOP16,.4			Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16					Not Qualified
74ACT11286DG4	Texas Instruments	PARITY GENERATOR/CHECKER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	9		5	5		SMALL OUTLINE	SOP14,.25	12 ns		Arithmetic Circuits	1.27 mm	85 Cel	3-STATE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		EVEN PARITY GENERATOR; ODD/EVEN PARITY CHECKER; WITH PARITY I/O AND ACTIVE LOW PARITY ERROR OUTPUT	e4	30	260	8.65 mm	ACT
74AC11521DW	Texas Instruments	IDENTITY COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	8		5	3.3/5	50 pF	SMALL OUTLINE	SOP20,.4	11.4 ns		Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	3 V		CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	AC
SN74HC678NTP3	Texas Instruments	ADDRESS COMPARATOR	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS						IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T24
SN74HC148J4	Texas Instruments	ENCODER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO		CMOS				2/6		IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T16
SN74HC682DWE4	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	8		5	2/6	50 pF	SMALL OUTLINE	SOP20,.4	344 ns		Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	2 V		WITH PULL-UP RESISTORS ON B INPUTS; WITH A = B & A > B OUTPUTS	e4	30	260	12.8 mm	HC/UH
SN74HC682DW3	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		CMOS				2/6		SMALL OUTLINE	SOP20,.4			Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20
SN74HC148FN3	Texas Instruments	ENCODER	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		CMOS				2/6		CHIP CARRIER	LDCC20,.4SQ			Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		QUAD	S-PQCC-J20
74AC11286D	Texas Instruments	PARITY GENERATOR/CHECKER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	9		5	3.3/5	50 pF	SMALL OUTLINE	SOP14,.25	10.7 ns		Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V		EVEN PARITY GENERATOR; ODD/EVEN PARITY CHECKER; WITH PARITY I/O AND ACTIVE LOW PARITY ERROR OUTPUT		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	AC
SN74HC680DW	Texas Instruments	ADDRESS COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		CMOS						SMALL OUTLINE	SOP20,.4			Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20					Not Qualified
SN74HC85AD	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		CMOS				2/6		SMALL OUTLINE	SOP16,.25			Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16					Not Qualified
SN74HC147N1	Texas Instruments	ENCODER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS				2/6		IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T16					Not Qualified
SN74HC684DWR	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	8		5	2/6		SMALL OUTLINE	SOP20,.4	344 ns		Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	2 V		WITH A=B AND A > B OUTPUTS	e4	30	260	12.8 mm	HC/UH
SN74HC686NT3	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS						IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T24
SN74HC148FH	Texas Instruments	ENCODER	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES		CMOS				2/6		CHIP CARRIER	LCC20,.35SQ			Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		QUAD	S-XQCC-N20					Not Qualified
SN74HC147DW3	Texas Instruments	ENCODER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		CMOS				2/6		SMALL OUTLINE	SOP16,.4			Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16
SN74HC678NT-10	Texas Instruments	ADDRESS COMPARATOR	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS	16		5		50 pF	IN-LINE		156 ns			2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T24		6 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	2 V		WITH OUTPUT LATCH				31.64 mm	HC/UH
SN74HC381N3	Texas Instruments	ARITHMETIC LOGIC UNIT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS						IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T20
SN74HC182J4	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO		CMOS				2/6		IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T16
SN74HC181N3	Texas Instruments	ARITHMETIC LOGIC UNIT	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS				2/6		IN-LINE	DIP24,.6			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T24
MM74C923M	Texas Instruments	ENCODER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	9		5			SMALL OUTLINE		150 ns			1.27 mm	85 Cel	3-STATE	-40 Cel		DUAL	R-PDSO-G20		15 V	2.65 mm	7.5 mm			3 V						12.8 mm	CMOS
SN74HC682J4	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO		CMOS				2/6		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T20
MM74C922M	Texas Instruments	ENCODER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	8		5			SMALL OUTLINE		150 ns			1.27 mm	85 Cel	3-STATE	-40 Cel		DUAL	R-PDSO-G20		15 V	2.65 mm	7.5 mm			3 V						12.8 mm	CMOS
SN74HC682DW	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	8	TUBE	5	2/6	50 pF	SMALL OUTLINE	SOP20,.4	344 ns	5.2 Amp	Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	2 V	1.1 mA	WITH PULL-UP RESISTORS ON B INPUTS; WITH A = B & A > B OUTPUTS	e4	30	260	12.8 mm	HC
74AC11521DBLE	Texas Instruments	IDENTITY COMPARATOR	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	8		5	3.3/5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	11.4 ns		Arithmetic Circuits	.65 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	INVERTED	3 V		CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	7.2 mm	AC
SN74HC182N1	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS				2/6		IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T16					Not Qualified
SN74HC686JT	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO		CMOS						IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T24					Not Qualified
SN74HC682N	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS	8	TUBE	5	2/6	50 pF	IN-LINE	DIP20,.3	344 ns	5.2 Amp	Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T20		6 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	2 V	1.1 mA	WITH PULL-UP RESISTORS ON B INPUTS; WITH A = B & A > B OUTPUTS	e4			25.4 mm	HC
74AC11521N	Texas Instruments	IDENTITY COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS	8		5	3.3/5	50 pF	IN-LINE	DIP20,.3	11.4 ns		Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	3 V		CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	AC

Digital Arithmetic Circuits

Digital arithmetic circuits are electronic circuits designed to perform arithmetic operations on digital signals. These circuits are essential components of digital systems, such as microprocessors, digital signal processors, and programmable logic devices.

Digital arithmetic circuits can perform various arithmetic operations, including addition, subtraction, multiplication, division, and modulo arithmetic. These operations are performed using binary arithmetic, where numbers are represented using the binary number system (0s and 1s).

Adders are one of the most commonly used digital arithmetic circuits. They are used to perform binary addition, where two binary numbers are added to produce a sum. Adders can be designed using various techniques, including ripple carry adders, carry look-ahead adders, and carry select adders.

Subtractors are also commonly used digital arithmetic circuits. They are used to perform binary subtraction, where one binary number is subtracted from another to produce a difference. Subtractors can be designed using techniques, including ripple borrow subtractors, borrow look-ahead subtractors, and borrow select subtractors.

Multiplexers and demultiplexers are digital circuits that can be used for various arithmetic operations, such as multiplication and division. Multiplexers can be used to select one of several input signals based on a control signal, while demultiplexers can be used to distribute a single input signal to several outputs based on a control signal.

Digital arithmetic circuits can also be designed using programmable logic devices, such as field-programmable gate arrays (FPGAs) and complex programmable logic devices (CPLDs). These devices can be programmed to implement various arithmetic operations and can be reprogrammed to adapt to changing system requirements.