Renesas Electronics Digital Arithmetic Circuits 278

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	No. of Functions	Technology	Screening Level	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
HD74ACT283AP	Renesas Electronics	ADDER/SUBTRACTOR	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1	CMOS		4	5		IN-LINE		16.5 ns		2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T16		6 V	5.06 mm	7.62 mm	Not Qualified		2 V	WITH INTERNAL CARRY LOOKAHEAD				19.2 mm	ACT
HD74HC149RPEL	Renesas Electronics	ENCODER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		8	4.5		SMALL OUTLINE		175 ns		1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified		2 V					12.8 mm	HC
HD74ACT283P	Renesas Electronics	ADDER/SUBTRACTOR	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1	CMOS		4	5	5	IN-LINE	DIP16,.3	16.5 ns	Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T16		5.5 V	5.06 mm	7.62 mm	Not Qualified		4.5 V					19.2 mm	ACT
HD74LS283RP-EL	Renesas Electronics	ADDER/SUBTRACTOR		GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES							SMALL OUTLINE				1.27 mm					DUAL	R-PDSO-G16			1.75 mm	3.9 mm	Not Qualified							9.9 mm	LS
ACS630HMSR	Renesas Electronics	ERROR DETECTION AND CORRECTION CIRCUIT		NO LEAD	28	DIE	RECTANGULAR	300k Rad(Si)	UNSPECIFIED	YES	1	CMOS	MIL-PRF-38535 Class V	16	5		UNCASED CHIP		37 ns				3-STATE			UPPER	R-XUUC-N28		5.5 V			Not Qualified		4.5 V						AC
HD74LS283FPEL	Renesas Electronics	ADDER/SUBTRACTOR	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	TTL		4	5	5	SMALL OUTLINE	SOP16,.3	24 ns	Arithmetic Circuits	1.27 mm	75 Cel		-20 Cel		DUAL	R-PDSO-G16		5.25 V	2.2 mm	5.5 mm	Not Qualified		4.75 V			NOT SPECIFIED	NOT SPECIFIED	10.06 mm	LS
HD74HC688P	Renesas Electronics	IDENTITY COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1	CMOS		8	4.5	2/6	IN-LINE	DIP20,.3	265 ns	Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T20	1	6 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	2 V	CASCADABLE				24.5 mm	HC
HD74HCT688FP-E	Renesas Electronics	IDENTITY COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		8	5		SMALL OUTLINE		53 ns		1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20	1	5.5 V	2.2 mm	5.5 mm	Not Qualified	INVERTED	4.5 V					12.6 mm	HCT
HD74HC280T	Renesas Electronics	PARITY GENERATOR/CHECKER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		9			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		255 ns		.65 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G14		6 V	1.1 mm	4.4 mm	Not Qualified		2 V					5 mm	HC/UH
HD74AC182FPEL	Renesas Electronics	LOOK-AHEAD CARRY GENERATOR	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		4	3.3		SMALL OUTLINE		11.5 ns		1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16		6 V	2.2 mm	5.5 mm	Not Qualified		2 V					10.06 mm	AC
HD74AC182FPELV	Renesas Electronics	LOOK-AHEAD CARRY GENERATOR	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		4	3.3		SMALL OUTLINE		11.5 ns		1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16		6 V	2.2 mm	5.5 mm	Not Qualified		2 V					10.06 mm	AC
HD74HC280P	Renesas Electronics	PARITY GENERATOR/CHECKER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1	CMOS		9	4.5	2/6	IN-LINE	DIP14,.3	255 ns	Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T14	1	6 V	5.06 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V					19.2 mm	HC
HD74LS148FP	Renesas Electronics	ENCODER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	TTL		8	5		SMALL OUTLINE		55 ns		1.27 mm	75 Cel		-20 Cel		DUAL	R-PDSO-G16	1		2.2 mm	5.5 mm	Not Qualified			8 TO 3 LINE PRIORITY ENCODER; CASCADABLE; WITH GROUP SELECT OUTPUT				10.06 mm	LS
HD74HC147FP	Renesas Electronics	ENCODER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		9	4.5	2/6	SMALL OUTLINE	SOP16,.25	275 ns	Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16	1	6 V	2.2 mm	5.5 mm	Not Qualified		2 V			20	260	10.06 mm	HC/UH
HD74HC680P	Renesas Electronics	ADDRESS COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1	CMOS		12	4.5		IN-LINE		265 ns		2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T20		6 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	2 V	WITH OUTPUT LATCH				24.5 mm	HC/UH
HD74HC147P-E	Renesas Electronics	ENCODER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1	CMOS		9	4.5		IN-LINE		275 ns		2.54 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16	1	6 V	5.06 mm	7.62 mm	Not Qualified		2 V		e4			19.2 mm	HC/UH
HD74HC680RPEL	Renesas Electronics	ADDRESS COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		12	4.5	2/6	SMALL OUTLINE	SOP20,.4	265 ns	Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	2 V			NOT SPECIFIED	NOT SPECIFIED	12.8 mm	HC
HD74ACT182FP	Renesas Electronics	LOOK-AHEAD CARRY GENERATOR	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		4	5		SMALL OUTLINE		12 ns		1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16		5.5 V	2.2 mm	5.5 mm	Not Qualified		4.5 V					10.06 mm	ACT
HD74HC147FP-E	Renesas Electronics	ENCODER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		9	4.5		SMALL OUTLINE		275 ns		1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16	1	6 V	2.2 mm	5.5 mm	Not Qualified		2 V					10.06 mm	HC/UH
HD74HC678FP	Renesas Electronics	ADDRESS COMPARATOR		GULL WING	24	SOP	RECTANGULAR		PLASTIC/EPOXY	YES							SMALL OUTLINE				1.27 mm					DUAL	R-PDSO-G24			2.5 mm	8.4 mm	Not Qualified							15.8 mm	HC/UH
HD74ACT280FP-E	Renesas Electronics	PARITY GENERATOR/CHECKER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		9	5		SMALL OUTLINE		16.5 ns		1.27 mm	85 Cel		-40 Cel	TIN BISMUTH	DUAL	R-PDSO-G14	1	5.5 V	2.2 mm	5.5 mm	Not Qualified	COMPLEMENTARY	4.5 V		e6			10.06 mm	ACT
HD74HC149T	Renesas Electronics	ENCODER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		8	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		35 ns		.65 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20		6 V	1.1 mm	4.4 mm	Not Qualified		2 V	8 TO 8 LINE PRIORITY ENCODER				6.5 mm	HC/UH
HD74HC280FP-E	Renesas Electronics	PARITY GENERATOR/CHECKER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		9	4.5		SMALL OUTLINE		255 ns		1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G14	1	6 V	2.2 mm	5.5 mm	Not Qualified	COMPLEMENTARY	2 V					10.06 mm	HC/UH
HD74HC283RP	Renesas Electronics	ADDER/SUBTRACTOR	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		4	4.5		SMALL OUTLINE		190 ns		1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified		2 V			NOT SPECIFIED	NOT SPECIFIED	9.9 mm	HC/UH
HD74HC680FP-EL	Renesas Electronics	ADDRESS COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		12	4.5		SMALL OUTLINE		265 ns		1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20		6 V	2.2 mm	5.5 mm	Not Qualified	INVERTED	2 V	WITH OUTPUT LATCH				12.6 mm	HC/UH
HD74HC148FPEL	Renesas Electronics	ENCODER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		8	4.5	2/6	SMALL OUTLINE	SOP16,.3	290 ns	Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16	1	6 V	2.2 mm	5.5 mm	Not Qualified		2 V			20	260	10.06 mm	HC
HD74HC147T	Renesas Electronics	ENCODER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		9	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		55 ns		.65 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16		6 V	1.1 mm	4.4 mm	Not Qualified		2 V	9 TO 4 LINE PRIORITY ENCODER				5 mm	HC/UH
HD74ACT280FP	Renesas Electronics	PARITY GENERATOR/CHECKER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		9	5		SMALL OUTLINE		16.5 ns		1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G14		5.5 V	2.2 mm	5.5 mm	Not Qualified	COMPLEMENTARY	4.5 V		e0			10.06 mm	ACT
HD74AC280RPVEL	Renesas Electronics	PARITY GENERATOR/CHECKER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		9	3.3		SMALL OUTLINE		18.5 ns		1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G14		6 V	1.75 mm	3.95 mm	Not Qualified	COMPLEMENTARY	2 V					8.65 mm	AC
HD74AC524FP	Renesas Electronics	MAGNITUDE COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		8			SMALL OUTLINE		40.5 ns		1.27 mm	85 Cel	OPEN-DRAIN	-40 Cel		DUAL	R-PDSO-G20		6 V	2.2 mm	5.5 mm	Not Qualified	TRUE	2 V	WITH ARITHMETIC COMPARISON				12.6 mm	AC
HD74HC182RPEL	Renesas Electronics	LOOK-AHEAD CARRY GENERATOR	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		4	4.5		SMALL OUTLINE		46 ns		1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16		6 V	1.75 mm	3.95 mm	Not Qualified	TRUE	2 V					9.9 mm	HC
HD74HC182FP-EL	Renesas Electronics	LOOK-AHEAD CARRY GENERATOR		GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES							SMALL OUTLINE				1.27 mm					DUAL	R-PDSO-G16			2.2 mm	5.5 mm	Not Qualified							10.06 mm	HC/UH
HD74LS148P-E	Renesas Electronics	ENCODER	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1	TTL		8	5		IN-LINE		55 ns		2.54 mm	75 Cel		-20 Cel		DUAL	R-PDIP-T16	1		5.06 mm	7.62 mm	Not Qualified			8 TO 3 LINE PRIORITY ENCODER; CASCADABLE; WITH GROUP SELECT OUTPUT				19.2 mm	LS
HD74AC182RPEL	Renesas Electronics	LOOK-AHEAD CARRY GENERATOR	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		4	3.3		SMALL OUTLINE		11.5 ns		1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16		6 V	1.75 mm	3.95 mm	Not Qualified		2 V					9.9 mm	AC
HD74LS85FPEL	Renesas Electronics	MAGNITUDE COMPARATOR	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	TTL		4	5	5	SMALL OUTLINE	SOP16,.3	45 ns	Arithmetic Circuits	1.27 mm	75 Cel		-20 Cel		DUAL	R-PDSO-G16	1	5.25 V	2.2 mm	5.5 mm	Not Qualified	TRUE	4.75 V			20	260	10.06 mm	LS
HD74HC148RP	Renesas Electronics	ENCODER		GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES							SMALL OUTLINE				1.27 mm					DUAL	R-PDSO-G16			1.75 mm	3.9 mm	Not Qualified							9.9 mm
HD74LS280P	Renesas Electronics	PARITY GENERATOR/CHECKER	COMMERCIAL EXTENDED	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1	TTL		9	5	5	IN-LINE	DIP14,.3	50 ns	Arithmetic Circuits	2.54 mm	75 Cel		-20 Cel		DUAL	R-PDIP-T14		5.25 V	5.06 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V					19.2 mm	LS
HD74LS85P	Renesas Electronics	MAGNITUDE COMPARATOR	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1	TTL		4	5	5	IN-LINE	DIP16,.3	45 ns	Arithmetic Circuits	2.54 mm	75 Cel		-20 Cel		DUAL	R-PDIP-T16	1	5.25 V	5.06 mm	7.62 mm	Not Qualified	TRUE	4.75 V					19.2 mm	LS
HD74AC283FP	Renesas Electronics	ADDER/SUBTRACTOR	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		4	3.3	3.3/5	SMALL OUTLINE	SOP16,.3	18.5 ns	Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16		3.6 V	2.2 mm	5.5 mm	Not Qualified		3 V	ALSO OPERATES WITH 5V SUPPLY				10.06 mm	AC
HD74ACT283TELL	Renesas Electronics	ADDER/SUBTRACTOR	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		4	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		16.5 ns		.65 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16		6 V	1.1 mm	4.4 mm	Not Qualified		2 V	WITH INTERNAL CARRY LOOKAHEAD				5 mm	ACT
HD74HC688FP	Renesas Electronics	IDENTITY COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		8	4.5	2/6	SMALL OUTLINE	SOP20,.3	265 ns	Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20	1	6 V	2.2 mm	5.5 mm	Not Qualified	INVERTED	2 V	CASCADABLE		20	260	12.6 mm	HC/UH
HD74ACT283ARPVEL	Renesas Electronics	ADDER/SUBTRACTOR	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		4	5		SMALL OUTLINE		16.5 ns		1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16		6 V	1.75 mm	3.95 mm	Not Qualified		2 V	WITH INTERNAL CARRY LOOKAHEAD				9.9 mm	ACT
HD74ACT283TVELL	Renesas Electronics	ADDER/SUBTRACTOR	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		4	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		16.5 ns		.65 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16		6 V	1.1 mm	4.4 mm	Not Qualified		2 V	WITH INTERNAL CARRY LOOKAHEAD				5 mm	ACT
HD74HC280RP	Renesas Electronics	PARITY GENERATOR/CHECKER		GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES							SMALL OUTLINE				1.27 mm					DUAL	R-PDSO-G14			1.75 mm	3.9 mm	Not Qualified							8.65 mm	HC/UH
HD74HC280FP	Renesas Electronics	PARITY GENERATOR/CHECKER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		9	4.5		SMALL OUTLINE		255 ns		1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G14	1	6 V	2.2 mm	5.5 mm	Not Qualified	COMPLEMENTARY	2 V					10.06 mm	HC/UH
HD74HC283P	Renesas Electronics	ADDER/SUBTRACTOR	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1	CMOS		4	4.5	2/6	IN-LINE	DIP16,.3	190 ns	Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T16	1	6 V	5.06 mm	7.62 mm	Not Qualified		2 V					19.2 mm	HC
HD74AC283APV	Renesas Electronics	ADDER/SUBTRACTOR	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1	CMOS		4	3.3		IN-LINE		18.5 ns		2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T16		6 V	5.06 mm	7.62 mm	Not Qualified		2 V	WITH INTERNAL CARRY LOOKAHEAD				19.2 mm	AC
HD74HC682RP	Renesas Electronics	MAGNITUDE COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	CMOS		8	4.5		SMALL OUTLINE		250 ns		1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	2 V	WITH PULLUP RESISTORS ON B INPUTS; WITH A = B & A > B OUTPUTS		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	HC/UH

Digital Arithmetic Circuits

Digital arithmetic circuits are electronic circuits designed to perform arithmetic operations on digital signals. These circuits are essential components of digital systems, such as microprocessors, digital signal processors, and programmable logic devices.

Digital arithmetic circuits can perform various arithmetic operations, including addition, subtraction, multiplication, division, and modulo arithmetic. These operations are performed using binary arithmetic, where numbers are represented using the binary number system (0s and 1s).

Adders are one of the most commonly used digital arithmetic circuits. They are used to perform binary addition, where two binary numbers are added to produce a sum. Adders can be designed using various techniques, including ripple carry adders, carry look-ahead adders, and carry select adders.

Subtractors are also commonly used digital arithmetic circuits. They are used to perform binary subtraction, where one binary number is subtracted from another to produce a difference. Subtractors can be designed using techniques, including ripple borrow subtractors, borrow look-ahead subtractors, and borrow select subtractors.

Multiplexers and demultiplexers are digital circuits that can be used for various arithmetic operations, such as multiplication and division. Multiplexers can be used to select one of several input signals based on a control signal, while demultiplexers can be used to distribute a single input signal to several outputs based on a control signal.

Digital arithmetic circuits can also be designed using programmable logic devices, such as field-programmable gate arrays (FPGAs) and complex programmable logic devices (CPLDs). These devices can be programmed to implement various arithmetic operations and can be reprogrammed to adapt to changing system requirements.