Texas Instruments Digital Arithmetic Circuits 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74AS282DWR	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	TTL		4		5			SMALL OUTLINE					1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V		WITH HIGHER ORDER LOOKAHEAD; WITH ACTIVE HIGH OR LOW SELECTABLE CARRY INPUTS				12.8 mm	AS
SN74HC182NP3	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS					2/6		IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T16
SN74278N3	Texas Instruments	ENCODER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL							IN-LINE	DIP14,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T14
CD74ACT283M96E4	Texas Instruments	ADDER/SUBTRACTOR	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		4		5	5		SMALL OUTLINE	SOP16,.25	18.2 ns		Arithmetic Circuits	1.27 mm	125 Cel		-55 Cel		DUAL	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	ACT
SN74AS866JD4	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC	NO		TTL							IN-LINE	DIP28,.6			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T28
5962-8976501EX	Texas Instruments	ADDER/SUBTRACTOR	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	CMOS	MIL-STD-883	4		4.5		50 pF	IN-LINE		345 ns			2.54 mm	125 Cel		-55 Cel		DUAL	R-GDIP-T16		6 V	5.08 mm	7.62 mm	Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	19.56 mm	HC/UH
SN74LS636N1	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL							IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20					Not Qualified
SN74ALS522FN	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		TTL				5	5		CHIP CARRIER	LDCC20,.4SQ			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		QUAD	S-PQCC-J20					Not Qualified
SN74S484N	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL							IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20					Not Qualified			155 mA
SN74HC682DWR-00	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		8		5		50 pF	SMALL OUTLINE		69 ns			1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	2 V		WITH PULLUP RESISTORS ON B INPUTS				12.8 mm	HC/UH
SN74LS689DW	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	TTL		8		5	5	45 pF	SMALL OUTLINE	SOP20,.4	35 ns		Arithmetic Circuits	1.27 mm	70 Cel	OPEN-COLLECTOR	0 Cel		DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	4.5 V	65 mA	CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	LS
SN74ALS521FN3	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		TTL				5	5		CHIP CARRIER	LDCC20,.4SQ			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		QUAD	S-PQCC-J20
SN74HC630JP4	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC	NO		CMOS							IN-LINE	DIP28,.6			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T28
SN74ALS520DW	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	TTL		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.4	20 ns	24 Amp	Arithmetic Circuit	1.27 mm	70 Cel	3-STATE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	4.5 V	19 mA	WITH PULL-UP RESISTORS ON Q INPUTS; CASCADABLE	e4	30	260	12.8 mm	ALS
74AC11286DR	Texas Instruments	PARITY GENERATOR/CHECKER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		9		5	3.3/5	50 pF	SMALL OUTLINE	SOP14,.25	10.7 ns		Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V		EVEN PARITY GENERATOR; ODD/EVEN PARITY CHECKER; WITH PARITY I/O AND ACTIVE LOW PARITY ERROR OUTPUT		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	AC
SN74AS282J4	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO		TTL							IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T20
SN7483AJ-00	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	TTL		4		5		15 pF	IN-LINE		24 ns			2.54 mm	70 Cel		0 Cel		DUAL	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	110 mA	FULL ADDER				19.56 mm	TTL/H/L
SN74AS866FN3	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES		TTL							CHIP CARRIER	LDCC28,.5SQ			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		QUAD	S-PQCC-J28
SN74LS348DR	Texas Instruments	ENCODER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	TTL		8		5	5	15 pF	SMALL OUTLINE	SOP16,.25	21 ns		Arithmetic Circuits	1.27 mm	70 Cel	3-STATE	0 Cel		DUAL	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	25 mA	8 TO 3 LINE PRIORITY ENCODER		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
SN74S280NP3	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL				5	5		IN-LINE	DIP14,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T14
SN74ALS280N	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL		9		5		50 pF	IN-LINE	DIP14,.3	20 ns		Arithmetic Circuits	2.54 mm	70 Cel	3-STATE	0 Cel		DUAL	R-PDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V	16 mA	ODD/EVEN PARITY GENERATOR		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	ALS
CD4063BME4	Texas Instruments	MAGNITUDE COMPARATOR	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		4		5	5/15		SMALL OUTLINE	SOP16,.25	1250 ns		Arithmetic Circuits	1.27 mm	125 Cel		-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V		CASCADABLE	e4	30	260	9.9 mm	4000/14000/40000
SN74ALS521N-10	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL		8		5		50 pF	IN-LINE		20 ns			2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	4.5 V	19 mA	CASCADABLE				24.325 mm	ALS
SN74LS83AN-00	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL		4		5		15 pF	IN-LINE		24 ns			2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	39 mA	FULL ADDER				19.305 mm	LS
CD4532BMT	Texas Instruments	ENCODER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		8		5	5/15		SMALL OUTLINE	SOP16,.25	440 ns		Arithmetic Circuits	1.27 mm	125 Cel		-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	INVERTED	3 V			e4	30	260	9.9 mm	4000/14000/40000
SN74AS280DRG4	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	TTL		9		5	5		SMALL OUTLINE	SOP14,.25	12 ns		Arithmetic Circuits	1.27 mm	70 Cel	3-STATE	0 Cel		DUAL	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V		ODD/EVEN PARITY GENERATOR		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	AS
SN74S85FN	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	TTL		4		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	16.5 ns		Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		QUAD	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V		CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	S
5962-8867201EX	Texas Instruments	MAGNITUDE COMPARATOR	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	CMOS	MIL-STD-883	4		5		50 pF	IN-LINE		60 ns			2.54 mm	125 Cel		-55 Cel		DUAL	R-GDIP-T16		5.5 V	5.08 mm	7.62 mm	Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	19.56 mm	HCT
SN74LS682J	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	TTL		8		5	5	45 pF	IN-LINE	DIP20,.3	30 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	4.5 V	70 mA	WITH PULL-UP RESISTORS ON B INPUTS; WITH A = B & A > B OUTPUTS		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	LS
SN7485J-00	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	TTL		4		5		15 pF	IN-LINE		30 ns			2.54 mm	70 Cel		0 Cel		DUAL	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	88 mA	CASCADABLE				19.56 mm	TTL/H/L
SN74ALS520N1	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL				5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20					Not Qualified
SN74F521D	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		TTL				5	5		SMALL OUTLINE	SOP20,.4			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20					Not Qualified
SN74ALS518FN3	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		TTL				5	5		CHIP CARRIER	LDCC20,.4SQ			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		QUAD	S-PQCC-J20
SN74AS280D	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	TTL		9		5	5	50 pF	SMALL OUTLINE	SOP14,.25	12 ns		Arithmetic Circuits	1.27 mm	70 Cel	3-STATE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	35 mA	ODD/EVEN PARITY GENERATOR	e4	30	260	8.65 mm	AS
SN74S182DR	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	TTL		4		5		15 pF	SMALL OUTLINE		10.5 ns			1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	109 mA	WITH HIGHER ORDER LOOKAHEAD				9.9 mm	S
SN74AS882NTP3	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL							IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T24
CD74HCT85E	Texas Instruments	MAGNITUDE COMPARATOR	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS		4	TUBE	5	5	50 pF	IN-LINE	DIP16,.3	60 ns	4 Amp	Arithmetic Circuits	2.54 mm	125 Cel		-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	.08 mA	CASCADABLE, THREE POSSIBLE OUTPUTS ARE A<B, A=B AND A>B	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	HCT
SN74ALS518DWE4	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	TTL		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.4	33 ns	24 Amp	Arithmetic Circuits	1.27 mm	70 Cel	OPEN-COLLECTOR	0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	17 mA	WITH PULL-UP RESISTORS ON Q INPUTS; CASCADABLE	e4	30	260	12.8 mm	ALS
CD74HCT85M96G4	Texas Instruments	MAGNITUDE COMPARATOR	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		4		5	5		SMALL OUTLINE	SOP16,.4	60 ns		Arithmetic Circuits	1.27 mm	125 Cel		-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		CASCADABLE, THREE POSSIBLE OUTPUTS ARE A<B, A=B AND A>B	e4	30	260	9.9 mm	HCT
SN74S275N3	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL							IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16
SN74LS682DW3	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		TTL				5	5		SMALL OUTLINE	SOP20,.4			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20
CD4532BMTG4	Texas Instruments	ENCODER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		8		5	5/15		SMALL OUTLINE	SOP16,.25	440 ns		Arithmetic Circuits	1.27 mm	125 Cel		-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	INVERTED	3 V			e4	30	260	9.9 mm	4000/14000/40000
SN74LS280DE4	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	TTL		9		5	5	15 pF	SMALL OUTLINE	SOP14,.25	50 ns		Arithmetic Circuits	1.27 mm	70 Cel		0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	27 mA	ODD/EVEN PARITY GENERATOR	e4	30	260	8.65 mm	LS
SN74S280N	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	TTL		9		5	5	15 pF	IN-LINE	DIP14,.3	50 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	105 mA	ODD/EVEN PARITY GENERATOR	e4			19.305 mm	S
SN74LS283J	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	TTL		4		5	5	15 pF	IN-LINE	DIP16,.3	24 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	39 mA	FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADING		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
SN74LS147NP3	Texas Instruments	ENCODER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL				5	5		IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16
CD40147BK	Texas Instruments	ENCODER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	1	CMOS		10		5	5/15		FLATPACK	FL16,.3	900 ns		Arithmetic Circuits	1.27 mm	125 Cel		-55 Cel		DUAL	R-CDFP-F16		18 V			Not Qualified		3 V		10 TO 4 LINE PRIORITY ENCODER		NOT SPECIFIED	NOT SPECIFIED		4000/14000/40000
SN74LS630NP3	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		TTL							IN-LINE	DIP28,.6			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T28

Digital Arithmetic Circuits

Digital arithmetic circuits are electronic circuits designed to perform arithmetic operations on digital signals. These circuits are essential components of digital systems, such as microprocessors, digital signal processors, and programmable logic devices.

Digital arithmetic circuits can perform various arithmetic operations, including addition, subtraction, multiplication, division, and modulo arithmetic. These operations are performed using binary arithmetic, where numbers are represented using the binary number system (0s and 1s).

Adders are one of the most commonly used digital arithmetic circuits. They are used to perform binary addition, where two binary numbers are added to produce a sum. Adders can be designed using various techniques, including ripple carry adders, carry look-ahead adders, and carry select adders.

Subtractors are also commonly used digital arithmetic circuits. They are used to perform binary subtraction, where one binary number is subtracted from another to produce a difference. Subtractors can be designed using techniques, including ripple borrow subtractors, borrow look-ahead subtractors, and borrow select subtractors.

Multiplexers and demultiplexers are digital circuits that can be used for various arithmetic operations, such as multiplication and division. Multiplexers can be used to select one of several input signals based on a control signal, while demultiplexers can be used to distribute a single input signal to several outputs based on a control signal.

Digital arithmetic circuits can also be designed using programmable logic devices, such as field-programmable gate arrays (FPGAs) and complex programmable logic devices (CPLDs). These devices can be programmed to implement various arithmetic operations and can be reprogrammed to adapt to changing system requirements.