Texas Instruments Digital Arithmetic Circuits 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74ALS527J4	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO		TTL							IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T20
SN7482N	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	TTL		2		5	5	15 pF	IN-LINE	DIP14,.3	42 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	58 mA	FULL ADDER; PERMITS RIPPLE CARRY CASCADING		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
SN74S181JP4	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC		NO		TTL							IN-LINE	DIP24,.6			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T24
5962-9754701QFA	Texas Instruments	MAGNITUDE COMPARATOR	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	YES	1	TTL	MIL-PRF-38535 Class Q	4	TUBE	5	5	15 pF	FLATPACK	FL16,.3	45 ns	16 Amp	Arithmetic Circuit	1.27 mm	125 Cel		-55 Cel	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		5.5 V	2.03 mm	6.73 mm	Qualified	TRUE	4.5 V	88 mA	CASCADABLE	e0	NOT SPECIFIED	NOT SPECIFIED	10.2 mm	LS
SN74ALS617FN	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1	TTL		16		5		50 pF	CHIP CARRIER	LDCC44,.7SQ	65 ns		Arithmetic Circuits	1.27 mm	70 Cel	OPEN-COLLECTOR	0 Cel		QUAD	S-PQCC-J44		5.5 V	4.57 mm	16.5862 mm	Not Qualified		4.5 V		BUILT IN DIAGNOSTICS; BYTE CONTROL		NOT SPECIFIED	NOT SPECIFIED	16.5862 mm	ALS
SN74ALS526J	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO		TTL							IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T20					Not Qualified
SN74AS181BNT	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	TTL		4		5		50 pF	IN-LINE	DIP24,.3	15 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T24		5.5 V	5.08 mm	7.62 mm	Not Qualified		4.5 V	117 mA	CAPABLE OF 16 LOGIC & ARITHMETIC OPERATIONS; INTERNAL CARRY AND HIGHER ORDER LOOKAHEAD	e4			31.64 mm	AS
CD74HC688M96E4	Texas Instruments	MAGNITUDE COMPARATOR	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	CMOS		8	TR	4.5	2/6	50 pF	SMALL OUTLINE	SOP20,.4	255 ns	5.2 Amp	Arithmetic Circuits	1.27 mm	125 Cel		-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	2 V	.08 mA	CASCADABLE	e4	NOT SPECIFIED	260	12.8 mm	HC/UH
SN74ALS6310DW	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		10		5	5		SMALL OUTLINE	SOP20,.4	18 ns		Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ALS
SN74278JP4	Texas Instruments	ENCODER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO		TTL							IN-LINE	DIP14,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T14
MM74C923M	Texas Instruments	ENCODER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	CMOS		9		5			SMALL OUTLINE		150 ns			1.27 mm	85 Cel	3-STATE	-40 Cel		DUAL	R-PDSO-G20		15 V	2.65 mm	7.5 mm			3 V						12.8 mm	CMOS
SN74F519DWR	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		8		5			SMALL OUTLINE		10 ns			1.27 mm	70 Cel	OPEN-COLLECTOR	0 Cel		DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		CASCADABLE				12.8 mm	F/FAST
CD74HCT85M96E4	Texas Instruments	MAGNITUDE COMPARATOR	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	CMOS		4		5	5		SMALL OUTLINE	SOP16,.25	60 ns		Arithmetic Circuits	1.27 mm	125 Cel		-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		CASCADABLE, THREE POSSIBLE OUTPUTS ARE A<B, A=B AND A>B	e4	30	260	9.9 mm	HCT
SN74HC682J4	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO		CMOS					2/6		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T20
CD74HC85PWE4	Texas Instruments	MAGNITUDE COMPARATOR	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	CMOS		4	TUBE	4.5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	295 ns	5.2 Amp	Arithmetic Circuits	.65 mm	125 Cel		-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.08 mA	CASCADABLE, THREE POSSIBLE OUTPUTS ARE A<B, A=B AND A>B	e4	NOT SPECIFIED	260	5 mm	HC/UH
SN74F280BD-00R	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		9		5			SMALL OUTLINE		11 ns			1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G14		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V		ODD/EVEN PARITY GENERATOR				8.65 mm	F/FAST
SN74283J4	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO		TTL				5	5		IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T16
SN74ALS679NSRG4	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		12		5	5		SMALL OUTLINE	SOP20,.3	35 ns		Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	INVERTED	4.5 V				NOT SPECIFIED	NOT SPECIFIED	12.6 mm	ALS
SN74180J4	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO		TTL				5	5		IN-LINE	DIP14,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T14
SN74F286N-10	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	TTL		9		5			IN-LINE					2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		ODD/EVEN PARITY CHECKER; WITH PARITY I/O AND ACTIVE LOW PARITY ERROR OUTPUT				19.305 mm	F/FAST
SN74LS682NE4	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	TTL		8		5	5	45 pF	IN-LINE	DIP20,.3	30 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	4.85 V	70 mA	WITH PULL-UP RESISTORS ON B INPUTS; WITH A = B & A > B OUTPUTS	e4			25.4 mm	LS
SN74AS182FN3	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES		TTL							CHIP CARRIER	LDCC20,.4SQ			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		QUAD	S-PQCC-J20
SN74ALS528N1	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL							IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16					Not Qualified
MM74C922M	Texas Instruments	ENCODER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	CMOS		8		5			SMALL OUTLINE		150 ns			1.27 mm	85 Cel	3-STATE	-40 Cel		DUAL	R-PDSO-G20		15 V	2.65 mm	7.5 mm			3 V						12.8 mm	CMOS
SN74F520DW	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		8		5		50 pF	SMALL OUTLINE		10.3 ns			1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	4.5 V	32 mA	WITH PULL-UP RESISTORS ON B INPUTS; CASCADABLE				12.8 mm	F/FAST
SN74HC682DW	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	CMOS		8	TUBE	5	2/6	50 pF	SMALL OUTLINE	SOP20,.4	344 ns	5.2 Amp	Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	2 V	1.1 mA	WITH PULL-UP RESISTORS ON B INPUTS; WITH A = B & A > B OUTPUTS	e4	30	260	12.8 mm	HC
74AC11521DBLE	Texas Instruments	IDENTITY COMPARATOR	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	CMOS		8		5	3.3/5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	11.4 ns		Arithmetic Circuits	.65 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	INVERTED	3 V		CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	7.2 mm	AC
SN74LS684DWE4	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		8		5	5	45 pF	SMALL OUTLINE	SOP20,.4	30 ns		Arithmetic Circuits	1.27 mm	70 Cel		0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	4.85 V	65 mA	WITH A = B & A > B OUTPUTS	e4	30	260	12.8 mm	LS
SN74HC182N1	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		CMOS					2/6		IN-LINE	DIP16,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T16					Not Qualified
SN74LS147N-00	Texas Instruments	ENCODER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	TTL		9		5		15 pF	IN-LINE		23 ns			2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	20 mA	9 TO 4 LINE PRIORITY ENCODER				19.305 mm	LS
SN74HC686JT	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC		NO		CMOS							IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T24					Not Qualified
SN74ALS688DW3	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES		TTL				5	5		SMALL OUTLINE	SOP20,.4			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20
SN74F520D	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES		TTL				5	5		SMALL OUTLINE	SOP20,.4			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20					Not Qualified
SN74S381J	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	TTL		4		5	5	15 pF	IN-LINE	DIP20,.3	25 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	160 mA	CAPABLE OF 3 LOGIC & ARITHMETIC OPERATIONS; INTERNAL CARRY AND HIGHER ORDER LOOKAHEAD		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	S
SN74AS882JT4	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC		NO		TTL							IN-LINE	DIP24,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T24
SN74ALS688NSR	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3	20 ns	24 Amp	Arithmetic Circuits	1.27 mm	70 Cel		0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	INVERTED	4.5 V	19 mA	CASCADABLE	e4	NOT SPECIFIED	260	12.6 mm	ALS
CD4532BNSRE4	Texas Instruments	ENCODER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	CMOS		8		5	5/15		SMALL OUTLINE	SOP16,.3	440 ns		Arithmetic Circuits	1.27 mm	125 Cel		-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	18 V	2 mm	5.3 mm	Not Qualified	INVERTED	3 V		8 TO 3 LINE PRIORITY ENCODER	e4	30	260	10.2 mm	4000/14000/40000
SN74LS280NE4	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	TTL		9		5	5	15 pF	IN-LINE	DIP14,.3	50 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	27 mA	ODD/EVEN PARITY GENERATOR	e4			19.305 mm	LS
SN74ALS520FN	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES		TTL				5	5		CHIP CARRIER	LDCC20,.4SQ			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		QUAD	S-PQCC-J20					Not Qualified
SN74HC682N	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	CMOS		8	TUBE	5	2/6	50 pF	IN-LINE	DIP20,.3	344 ns	5.2 Amp	Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T20		6 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	2 V	1.1 mA	WITH PULL-UP RESISTORS ON B INPUTS; WITH A = B & A > B OUTPUTS	e4			25.4 mm	HC
74AC11521N	Texas Instruments	IDENTITY COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	CMOS		8		5	3.3/5	50 pF	IN-LINE	DIP20,.3	11.4 ns		Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	3 V		CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	AC
74AC11181NT	Texas Instruments	ARITHMETIC LOGIC UNIT	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	CMOS		4		5	3.3/5	50 pF	IN-LINE	DIP28,.3	19.8 ns		Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T28		5.5 V	5.08 mm	7.62 mm	Not Qualified		3 V		CAPABLE OF 16 LOGIC & ARITHMETIC OPERATIONS		NOT SPECIFIED	NOT SPECIFIED	35.69 mm	AC
SN74AS181N	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL							IN-LINE	DIP24,.6			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T24					Not Qualified
SN74ALS280D	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		9		5		50 pF	SMALL OUTLINE	SOP14,.25	20 ns		Arithmetic Circuits	1.27 mm	70 Cel	3-STATE	0 Cel		DUAL	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	16 mA	ODD/EVEN PARITY GENERATOR		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	ALS
SN74ALS521FN-00	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1	TTL		8		5		50 pF	CHIP CARRIER		20 ns			1.27 mm	70 Cel		0 Cel		QUAD	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	INVERTED	4.5 V	19 mA	CASCADABLE				8.9662 mm	ALS
SN74S280DR	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		9		5	5	15 pF	SMALL OUTLINE	SOP14,.25	50 ns		Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G14		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	105 mA	ODD/EVEN PARITY GENERATOR		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	S
5962-9758701QEA	Texas Instruments	ADDER/SUBTRACTOR	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	TTL	MIL-PRF-38535 Class Q	4	TUBE	5	5	50 pF	IN-LINE	DIP16,.3	14 ns	20 Amp	Arithmetic Circuit	2.54 mm	125 Cel		-55 Cel	TIN LEAD	DUAL	R-GDIP-T16		5.5 V	5.08 mm	7.62 mm	Qualified	TRUE	4.5 V	55 mA	INTERNAL FULL-CARRY LOOK-AHEAD	e0			19.56 mm	F/FAST
SN74HC680N3	Texas Instruments	ADDRESS COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		CMOS							IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T20

Digital Arithmetic Circuits

Digital arithmetic circuits are electronic circuits designed to perform arithmetic operations on digital signals. These circuits are essential components of digital systems, such as microprocessors, digital signal processors, and programmable logic devices.

Digital arithmetic circuits can perform various arithmetic operations, including addition, subtraction, multiplication, division, and modulo arithmetic. These operations are performed using binary arithmetic, where numbers are represented using the binary number system (0s and 1s).

Adders are one of the most commonly used digital arithmetic circuits. They are used to perform binary addition, where two binary numbers are added to produce a sum. Adders can be designed using various techniques, including ripple carry adders, carry look-ahead adders, and carry select adders.

Subtractors are also commonly used digital arithmetic circuits. They are used to perform binary subtraction, where one binary number is subtracted from another to produce a difference. Subtractors can be designed using techniques, including ripple borrow subtractors, borrow look-ahead subtractors, and borrow select subtractors.

Multiplexers and demultiplexers are digital circuits that can be used for various arithmetic operations, such as multiplication and division. Multiplexers can be used to select one of several input signals based on a control signal, while demultiplexers can be used to distribute a single input signal to several outputs based on a control signal.

Digital arithmetic circuits can also be designed using programmable logic devices, such as field-programmable gate arrays (FPGAs) and complex programmable logic devices (CPLDs). These devices can be programmed to implement various arithmetic operations and can be reprogrammed to adapt to changing system requirements.