AUTOMOTIVE Digital Counters 1,225

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Load or Preset Input	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Operation Mode	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74HCT4060PW-T	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		14	YES		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		ASYNCHRONOUS	99 ns			.65 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	4.5 V	BUILT-IN OSCILLATOR				5 mm	HCT
74HCT163D-Q100J	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	4	YES		5			SMALL OUTLINE		SYNCHRONOUS	59 ns			1.27 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	17 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm		4.5 V	TCO OUTPUT				9.9 mm	HCT
74HCT4017PW	NXP Semiconductors	RING COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		10	YES		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		SYNCHRONOUS	75 ns			.65 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	4.5 V	JOHNSON COUNTER WITH 10 DECODED OUTPUTS				5 mm	HCT
74HCT4017BQ,115	NXP Semiconductors	RING COUNTER	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	1	20000000 Hz	CMOS		10	NO	TR	5	5	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	SYNCHRONOUS	75 ns	4 Amp	Counters	.5 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	20 MHz	R-XQCC-N16	1	5.5 V	1 mm	2.5 mm	Not Qualified	4.5 V	JOHNSON COUNTER WITH 10 DECODED OUTPUTS	e4	30	260	3.5 mm	HCT
74HCT4040BQ-Q100	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	12	YES		5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		ASYNCHRONOUS	60 ns			.5 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel		QUAD	20 MHz	R-PQCC-N16		5.5 V	1 mm	2.5 mm		4.5 V					3.5 mm	HCT
74HCT393D-T	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	22000000 Hz	CMOS		4	NO	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	ASYNCHRONOUS	38 ns	4 Amp	Counters	1.27 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V		e4	30	260	8.65 mm	HCT
74HC162D-T	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	YES		5		50 pF	SMALL OUTLINE		SYNCHRONOUS	57 ns				125 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		6 V			Not Qualified	2 V	TCO OUTPUT					HC/UH
74HCT4017D-Q100J	NXP Semiconductors	RING COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	10	YES		5			SMALL OUTLINE		SYNCHRONOUS	75 ns			1.27 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm		4.5 V	JOHNSON COUNTER WITH 10 DECODED OUTPUTS				9.9 mm	HCT
74HC4017DB,112	NXP Semiconductors	RING COUNTER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		10	NO		5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	SYNCHRONOUS	75 ns	4 Amp	Counters	.65 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	2 V	JOHNSON COUNTER WITH 10 DECODED OUTPUTS	e4	30	260	6.2 mm	HC/UH
74HCT4520D-Q100	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	AEC-Q100	4	YES		5			SMALL OUTLINE		SYNCHRONOUS	80 ns			1.27 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm		4.5 V					9.9 mm	HCT
74HCT4017DB-T	NXP Semiconductors	RING COUNTER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		10	YES		5		50 pF	SMALL OUTLINE, SHRINK PITCH		SYNCHRONOUS	75 ns			.65 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	4.5 V	JOHNSON COUNTER WITH 10 DECODED OUTPUTS				6.2 mm	HCT
74HCT160D,653	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	YES		5		50 pF	SMALL OUTLINE		SYNCHRONOUS	65 ns			1.27 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	11 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	TCO OUTPUT	e4			9.9 mm	HCT
74HC4059D,118	NXP Semiconductors	DIVIDE BY N COUNTER	AUTOMOTIVE	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS			YES		5		50 pF	SMALL OUTLINE		ASYNCHRONOUS	300 ns			1.27 mm	125 Cel	DOWN		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	40 MHz	R-PDSO-G24	1	6 V	2.65 mm	7.5 mm	Not Qualified	2 V	PROGRAMMABLE TO DIVIDE INPUT BY 3-15999; 10 MODES OF OPERATION; SCHMITT TRIGGER ON CLOCK INPUT	e4	30	260	15.4 mm	HC/UH
74HCT93NB	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS		3	YES		5		50 pF	IN-LINE		ASYNCHRONOUS	87 ns			2.54 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T14		5.5 V	4.2 mm	7.62 mm	Not Qualified	4.5 V	DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONS				19.025 mm	HCT
74HC4520D-Q100J	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	AEC-Q100	4	YES		5			SMALL OUTLINE		SYNCHRONOUS	72 ns			1.27 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm		2 V	GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT				9.9 mm	HC/UH
74HC4040DB,112	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		12	NO		5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	ASYNCHRONOUS	225 ns	4 Amp	Counters	.65 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	2 V		e4	30	260	6.2 mm	HC/UH
74HC4040D-Q100,118	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	12	YES		5			SMALL OUTLINE		ASYNCHRONOUS	225 ns			1.27 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm		2 V					9.9 mm	HC/UH
74HC161PW,112	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	18000000 Hz	CMOS		4	YES		5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	SYNCHRONOUS	57 ns	4 Amp	Counters	.65 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	15 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	2 V	TCO OUTPUT		30	260	5 mm	HC/UH
74HCT163PW-Q100J	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	4	YES		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		SYNCHRONOUS	59 ns			.65 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	17 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm		4.5 V	TCO OUTPUT				5 mm	HCT
74HC590D	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	NO		5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	ASYNCHRONOUS	230 ns	6 Amp	Counters	1.27 mm	125 Cel	UP	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	26 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V	TCO OUTPUT;REGISTERED OUTPUTS	e4	30	260	9.9 mm	HC/UH
74HC160PW	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	11000000 Hz	CMOS		4	YES		5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	SYNCHRONOUS	56 ns	4 Amp	Counters	.65 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	2 V	TCO OUTPUT	e4	30	260	5 mm	HC/UH
74HCT4510PW	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	YES		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		SYNCHRONOUS	75 ns			.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	4.5 V	TCO OUTPUT				5 mm	HCT
74HC390PW-T	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS		3	YES		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		ASYNCHRONOUS	63 ns			.65 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	2 V	DIVIDE BY 2 AND DIVIDE BY 5 FUNCTIONS	e4			5 mm	HC/UH
74HC4024DB-T	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		7	YES		5		50 pF	SMALL OUTLINE, SHRINK PITCH		ASYNCHRONOUS	265 ns			.65 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14	1	6 V	2 mm	5.3 mm	Not Qualified	2 V		e4			6.2 mm	HC/UH
74HCT93D-T	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		3	YES		5		50 pF	SMALL OUTLINE		ASYNCHRONOUS	87 ns			1.27 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONS	e4	30	260	8.65 mm	HCT
74HCT93N,112	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	20000000 Hz	CMOS		3	NO		5	5	50 pF	IN-LINE	DIP14,.3	ASYNCHRONOUS	87 ns	4 Amp	Counters	2.54 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T14		5.5 V	4.2 mm	7.62 mm	Not Qualified	4.5 V	DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONS	e4			19.025 mm	HCT
74HCT4020N	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	17000000 Hz	CMOS		14	NO		5	5	50 pF	IN-LINE	DIP16,.3	ASYNCHRONOUS	54 ns	4 Amp	Counters	2.54 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	17 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	4.5 V	OUTPUTS FROM 12 STAGES AVAILABLE	e4			19.025 mm	HCT
74HC393PW-Q100J	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	AEC-Q100	4	YES		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		ASYNCHRONOUS	190 ns			.65 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G14		6 V	1.1 mm	4.4 mm		2 V					5 mm	HC/UH
74HC40103PW-T	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	YES		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		SYNCHRONOUS	450 ns			.65 mm	125 Cel	DOWN		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	12 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	2 V	TCO OUTPUT; RESET TO MAX COUNT	e4			5 mm	HC/UH
74HCT4060D,653	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		14	NO	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	ASYNCHRONOUS	99 ns	4 Amp	Counters	1.27 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	BUILT-IN OSCILLATOR	e4	30	260	9.9 mm	HCT
74HC160N	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	11000000 Hz	CMOS		4	YES		5	2/6	50 pF	IN-LINE	DIP16,.3	SYNCHRONOUS	56 ns	4 Amp	Counters	2.54 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		6 V	4.7 mm	7.62 mm	Not Qualified	2 V	TCO OUTPUT	e4			21.6 mm	HC/UH
74HC4040PW,112	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		12	NO		5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	ASYNCHRONOUS	225 ns	4 Amp	Counters	.65 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	2 V		e4	30	260	5 mm	HC/UH
74HC4040PW	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		12	NO		5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	ASYNCHRONOUS	225 ns	4 Amp	Counters	.65 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	2 V		e4	30	260	5 mm	HC/UH
74HC191PW	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	16000000 Hz	CMOS		4	YES		5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	SYNCHRONOUS	66 ns	4 Amp	Counters	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	13 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	2 V	TCO OUTPUT	e4	30	260	5 mm	HC/UH
74HCT4520PW-T	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		4	YES		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		SYNCHRONOUS	80 ns			.65 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	4.5 V	GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT				5 mm	HCT
74HC193PW-Q100	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	4	YES		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		SYNCHRONOUS	325 ns			.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	15 MHz	R-PDSO-G16		6 V	1.1 mm	4.4 mm		2 V					5 mm	HC/UH
74HC4059D-T	NXP Semiconductors	DIVIDE BY N COUNTER	AUTOMOTIVE	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS			YES		5		50 pF	SMALL OUTLINE		ASYNCHRONOUS	300 ns			1.27 mm	125 Cel	DOWN		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	40 MHz	R-PDSO-G24	1	6 V	2.65 mm	7.5 mm	Not Qualified	2 V	PROGRAMMABLE TO DIVIDE INPUT BY 3-15999; 10 MODES OF OPERATION; SCHMITT TRIGGER ON CLOCK INPUT	e4	30	260	15.4 mm	HC/UH
74HCT4040BQX	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		12	YES		5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		ASYNCHRONOUS	60 ns			.5 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel		QUAD	20 MHz	R-PQCC-N16		5.5 V	1 mm	2.5 mm		4.5 V					3.5 mm	HCT
74HCT390D/T3	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS		3	YES		5			SMALL OUTLINE		ASYNCHRONOUS	77 ns			1.27 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	DIVIDE BY 2 AND DIVIDE BY 5 FUNCTIONS	e4			9.9 mm	HCT
74HC393DB	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		4	NO	BULK	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	ASYNCHRONOUS	190 ns	4 Amp	Counters	.65 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G14	1	6 V	2 mm	5.3 mm	Not Qualified	2 V		e4	30	260	6.2 mm	HC/UH
74HC4510PW	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	YES		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		SYNCHRONOUS	66 ns			.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		6 V	1.1 mm	4.4 mm	Not Qualified	2 V	TCO OUTPUT				5 mm	HC/UH
74HCT161BQ	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	YES		5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		SYNCHRONOUS	65 ns			.5 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	15 MHz	R-PQCC-N16		5.5 V	1 mm	2.5 mm	Not Qualified	4.5 V	TCO OUTPUT	e4			3.5 mm	HCT
74HC4024PW-Q100J	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	7	YES		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		ASYNCHRONOUS	265 ns			.65 mm	125 Cel	UP		NEGATIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G14		6 V	1.1 mm	4.4 mm		2 V					5 mm	HC/UH
74HCT160D,652	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	13000000 Hz	CMOS		4	YES		5	5	50 pF	SMALL OUTLINE	DIP16,.3	SYNCHRONOUS	65 ns	4 Amp	Counters	1.27 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	11 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	TCO OUTPUT	e4	30	260	9.9 mm	HCT
74HCT4017D,652	NXP Semiconductors	RING COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		10	NO		5	5	50 pF	SMALL OUTLINE	SOP16,.25	SYNCHRONOUS	75 ns	4 Amp	Counters	1.27 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	JOHNSON COUNTER WITH 10 DECODED OUTPUTS	e4	30	260	9.9 mm	HCT
74HC4520U	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	NO LEAD			UNSPECIFIED	UNSPECIFIED	YES	2		CMOS		4	YES		4.5			UNCASED CHIP		SYNCHRONOUS	360 ns				125 Cel	UP		POSITIVE EDGE	-40 Cel		UPPER	24 MHz	X-XUUC-N		6 V			Not Qualified	2 V						HC/UH
74HC163DB,112	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	18000000 Hz	CMOS		4	YES	BULK	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	SYNCHRONOUS	56 ns	4 Amp	Counters	.65 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	2 V	TCO OUTPUT	e4	30	260	6.2 mm	HC/UH
74HCT4017PW-T	NXP Semiconductors	RING COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		10	YES		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		SYNCHRONOUS	75 ns			.65 mm	125 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	4.5 V	JOHNSON COUNTER WITH 10 DECODED OUTPUTS				5 mm	HCT

Digital Counters

Digital counters are electronic circuits that can be used to count and keep track of the number of events or occurrences in a digital system. They are commonly used in digital systems to generate timing signals, to control sequencing, and to implement digital control functions.

Digital counters can be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs). They can also be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops.

Digital counters can be classified into two main types: synchronous counters and asynchronous counters. Synchronous counters use a common clock signal to synchronize the operation of all the flip-flops in the counter. Asynchronous counters, on the other hand, do not use a common clock signal and rely on the propagation delay of the flip-flops to sequence their operation.

Digital counters can also be classified based on their counting sequence. They can count up, down, or both up and down, depending on the application. Up counters increment the count each time an input pulse is received, while down counters decrement the count each time an input pulse is received. Up-down counters can count both up and down, depending on the direction of the input signal.

Digital counters can be used in various applications, including frequency division, time delay generation, event counting, and sequence control. They can be used to generate timing signals for clocking digital circuits, to control the sequencing of operations in a digital system, and to implement digital control functions, such as shift registers and sequence generators.