NXP Semiconductors Digital Counters 1,888

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Load or Preset Input	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Operation Mode	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74HC4040BQ-Q100X	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	12	YES		5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		ASYNCHRONOUS	225 ns			.5 mm	125 Cel	UP	NEGATIVE EDGE	-40 Cel		QUAD	24 MHz	R-PQCC-N16		6 V	1 mm	2.5 mm		2 V					3.5 mm	HC/UH
74HCT4516N	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		4	YES		5		50 pF	IN-LINE		SYNCHRONOUS	75 ns				125 Cel	BIDIRECTIONAL	POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T16		5.5 V			Not Qualified	4.5 V	TCO OUTPUT					HCT
74HC4020D,652	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		14	NO	TUBE	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	ASYNCHRONOUS	42 ns	4 Amp	Counters	1.27 mm	125 Cel	UP	NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V	OUTPUTS FROM 12 STAGES AVAILABLE	e4	30	260	9.9 mm	HC/UH
74HC40102PW-T	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	YES		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		SYNCHRONOUS	90 ns			.65 mm	125 Cel	DOWN	POSITIVE EDGE	-40 Cel		DUAL	10 MHz	R-PDSO-G16		6 V	1.1 mm	4.4 mm	Not Qualified	2 V	TCO OUTPUT; RESET TO MAX COUNT				5 mm	HC/UH
74HCT4060BQ,115	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		14	NO	TR	5	5	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	ASYNCHRONOUS	99 ns	4 Amp	Counter	.5 mm	125 Cel	UP	NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	20 MHz	R-PQCC-N16	1	5.5 V	1 mm	2.5 mm	Not Qualified	4.5 V		e4	30	260	3.5 mm	HCT
5962-3834301B2X	NXP Semiconductors	BINARY COUNTER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	1		TTL		4	YES		5			CHIP CARRIER		SYNCHRONOUS	11.5 ns				125 Cel	UP	POSITIVE EDGE	-55 Cel		QUAD	70 MHz	S-CQCC-N20		5.5 V			Not Qualified	4.5 V						F/FAST
HEF4029BPN	NXP Semiconductors	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		4	YES		5			IN-LINE		SYNCHRONOUS	290 ns			2.54 mm	85 Cel	BIDIRECTIONAL	POSITIVE EDGE	-40 Cel		DUAL	8 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	3 V	BINARY/BCD COUNT OPTION; TCO OUTPUT; COUNT ENABLE INPUT				21.6 mm	4000/14000/40000
74HC191N	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	16000000 Hz	CMOS		4	YES		5	2/6	50 pF	IN-LINE	DIP16,.3	SYNCHRONOUS	66 ns	4 Amp	Counters	2.54 mm	125 Cel	BIDIRECTIONAL	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	13 MHz	R-PDIP-T16		6 V	4.7 mm	7.62 mm	Not Qualified	2 V	TCO OUTPUT	e4			21.6 mm	HC/UH
5962-3832702BDX	NXP Semiconductors	BINARY COUNTER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	1		TTL		4	YES		5			FLATPACK		ASYNCHRONOUS	93 ns				125 Cel	UP	POSITIVE EDGE	-55 Cel		DUAL	25 MHz	R-GDFP-F14		5.5 V			Not Qualified	4.5 V						LS
HEF4516BD	NXP Semiconductors	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	3000000 Hz	CMOS		4	YES		5	5/15	50 pF	IN-LINE	DIP16,.3	SYNCHRONOUS	290 ns	.36 Amp	Counters	2.54 mm	85 Cel	BIDIRECTIONAL	POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-GDIP-T16	1	15 V	5.08 mm	7.62 mm	Not Qualified	3 V	TCO OUTPUT					4000/14000/40000
HEF4526BDB	NXP Semiconductors	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		4	YES		5		50 pF	IN-LINE		SYNCHRONOUS	300 ns			2.54 mm	85 Cel	DOWN	POSITIVE EDGE	-40 Cel		DUAL	6 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	3 V	TCO OUTPUT; GATED CLOCK					4000/14000/40000
74HCT192PW	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	YES		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		SYNCHRONOUS	65 ns			.65 mm	125 Cel	BIDIRECTIONAL	POSITIVE EDGE	-40 Cel		DUAL	13 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	4.5 V	TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK				5 mm	HCT
74HCT4060D-T	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		14	NO	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	ASYNCHRONOUS	99 ns	4 Amp	Counters	1.27 mm	125 Cel	UP	NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	BUILT-IN OSCILLATOR	e4			9.9 mm	HCT
74HC4017D-Q100J	NXP Semiconductors	RING COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	10	YES		5			SMALL OUTLINE		SYNCHRONOUS	375 ns			1.27 mm	125 Cel	UP	POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm		2 V	JOHNSON COUNTER WITH 10 DECODED OUTPUTS				9.9 mm	HC/UH
HEF40163BD	NXP Semiconductors	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	2500000 Hz	CMOS		4	YES		5	5/15	50 pF	IN-LINE	DIP16,.3	SYNCHRONOUS	220 ns	.36 Amp	Counters	2.54 mm	85 Cel	UP	POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	3 V	TCO OUTPUT					4000/14000/40000
HEF4024BDF	NXP Semiconductors	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		7	YES		5			IN-LINE		ASYNCHRONOUS	200 ns			2.54 mm	85 Cel	UP	NEGATIVE EDGE	-40 Cel		DUAL	35 MHz	R-GDIP-T14		15 V	5.08 mm	7.62 mm	Not Qualified	3 V						4000/14000/40000
74HCT4520D-T	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		4	YES		5		50 pF	SMALL OUTLINE		SYNCHRONOUS	80 ns				125 Cel	UP	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V			Not Qualified	4.5 V	GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT	e4				HCT
HEF40162BDB	NXP Semiconductors	DECADE COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		4	YES		5		50 pF	IN-LINE		SYNCHRONOUS	220 ns			2.54 mm	85 Cel	UP	POSITIVE EDGE	-40 Cel		DUAL	2.5 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	3 V	TCO OUTPUT					4000/14000/40000
74HCT393DB,112	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	18000000 Hz	CMOS		4	NO	BULK	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	ASYNCHRONOUS	38 ns	4 Amp	Counters	.65 mm	125 Cel	UP	NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	4.5 V		e4	30	260	6.2 mm	HCT
74HC4518PW-T	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		4	YES		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		SYNCHRONOUS	63 ns			.65 mm	125 Cel	UP	POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		6 V	1.1 mm	4.4 mm	Not Qualified	2 V	GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT				5 mm	HC/UH
HEF4518BP,652	NXP Semiconductors	DECADE COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	8000000 Hz	CMOS		4	NO	BULK	5	5/15	50 pF	IN-LINE	DIP16,.3	SYNCHRONOUS	240 ns		Counters	2.54 mm	85 Cel	UP	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	40 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	3 V	GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT	e4			21.6 mm	4000/14000/40000
HEF4510BPN	NXP Semiconductors	DECADE COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		4	YES		5			IN-LINE		SYNCHRONOUS	290 ns			2.54 mm	85 Cel	BIDIRECTIONAL	POSITIVE EDGE	-40 Cel		DUAL	34 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	3 V	TCO OUTPUT				21.6 mm	4000/14000/40000
HEF4060BTD-T	NXP Semiconductors	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000 Hz	CMOS		14	NO	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	ASYNCHRONOUS	420 ns	.36 Amp	Counters	1.27 mm	85 Cel	UP	NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G16		15 V	1.75 mm	3.9 mm	Not Qualified	3 V	OUTPUTS FROM 10 STAGES AVAILABLE; BUILT-IN OSCILLATOR; OSCILLATOR DISABLED BY CLEAR INPUT	e4			9.9 mm	4000/14000/40000
74HCT40103NB	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8	YES		5		50 pF	IN-LINE		SYNCHRONOUS	90 ns			2.54 mm	125 Cel	DOWN	POSITIVE EDGE	-40 Cel		DUAL	10 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	4.5 V	TCO OUTPUT; RESET TO MAX COUNT				19.025 mm	HCT
74HC4020U	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	NO LEAD			UNSPECIFIED	UNSPECIFIED	YES	1		CMOS		14	YES		4.5			UNCASED CHIP		ASYNCHRONOUS	210 ns				125 Cel	UP	NEGATIVE EDGE	-40 Cel		UPPER	24 MHz	X-XUUC-N		6 V			Not Qualified	2 V						HC/UH
74HCT4017BQ-Q100	NXP Semiconductors	RING COUNTER	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	10	YES		5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		SYNCHRONOUS	75 ns			.5 mm	125 Cel	UP	POSITIVE EDGE	-40 Cel		QUAD	20 MHz	R-PQCC-N16		5.5 V	1 mm	2.5 mm		4.5 V					3.5 mm	HCT
74HC191D,653	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	YES		5		50 pF	SMALL OUTLINE		SYNCHRONOUS	66 ns			1.27 mm	125 Cel	BIDIRECTIONAL	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	13 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V	TCO OUTPUT	e4	30	260	9.9 mm	HC/UH
74HCT4060D	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		14	NO		5	5	50 pF	SMALL OUTLINE	SOP16,.25	ASYNCHRONOUS	99 ns	4 Amp	Counters	1.27 mm	125 Cel	UP	NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	BUILT-IN OSCILLATOR	e4	30	260	9.9 mm	HCT
74HC163D-T	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	YES		5		50 pF	SMALL OUTLINE		SYNCHRONOUS	56 ns			1.27 mm	125 Cel	UP	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V	TCO OUTPUT	e4	30	260	9.9 mm	HC/UH
74HCT163DB,112	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	17000000 Hz	CMOS		4	YES	TUBE	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	SYNCHRONOUS	59 ns	4 Amp	Counters	.65 mm	125 Cel	UP	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	17 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	4.5 V	TCO OUTPUT	e4	30	260	6.2 mm	HCT
HEF4526BDF	NXP Semiconductors	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		4	YES		5			IN-LINE		SYNCHRONOUS	300 ns			2.54 mm	85 Cel	DOWN	POSITIVE EDGE	-40 Cel		DUAL	32 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	3 V	TCO OUTPUT; GATED CLOCK					4000/14000/40000
74HCT4059D	NXP Semiconductors	DIVIDE BY N COUNTER	AUTOMOTIVE	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	17000000 Hz	CMOS			YES		5	5	50 pF	SMALL OUTLINE	SOP24,.4	ASYNCHRONOUS	69 ns		Prescaler/Multivibrators	1.27 mm	125 Cel	DOWN	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	40 MHz	R-PDSO-G24	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	4.5 V	PROGRAMMABLE TO DIVIDE INPUT BY 3-15999; 10 MODES OF OPERATION; SCHMITT TRIGGER ON CLOCK INPUT	e4	30	260	15.4 mm	HCT
HEF4020BPN	NXP Semiconductors	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	5000000 Hz	CMOS		14	NO	BULK	5	5/15	50 pF	IN-LINE	DIP16,.3	ASYNCHRONOUS	210 ns		Counters	2.54 mm	85 Cel	UP	NEGATIVE EDGE	-40 Cel		DUAL	18 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	3 V	OUTPUTS FROM 12 STAGES AVAILABLE		40	245	21.6 mm	4000/14000/40000
74HC190DB-T	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	YES		5		50 pF	SMALL OUTLINE, SHRINK PITCH		SYNCHRONOUS	66 ns			.65 mm	125 Cel	BIDIRECTIONAL	POSITIVE EDGE	-40 Cel		DUAL	10 MHz	R-PDSO-G16		6 V	2 mm	5.3 mm	Not Qualified	2 V	TCO OUTPUT				6.2 mm	HC/UH
74HC4020BQ	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		14	YES		5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		ASYNCHRONOUS	42 ns			.5 mm	125 Cel	UP	NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	20 MHz	R-PQCC-N16	1	6 V	1 mm	2.5 mm	Not Qualified	2 V	OUTPUTS FROM 12 STAGES AVAILABLE	e4			3.5 mm	HC/UH
HEF4516BT,653	NXP Semiconductors	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000 Hz	CMOS		4	YES	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	SYNCHRONOUS	290 ns		Counters	1.27 mm	85 Cel	BIDIRECTIONAL	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G16	2	15 V	1.75 mm	3.9 mm	Not Qualified	3 V	TCO OUTPUT	e4	30	260	9.9 mm	4000/14000/40000
HEF4526BPN	NXP Semiconductors	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		4	YES		5			IN-LINE		SYNCHRONOUS	300 ns			2.54 mm	85 Cel	DOWN	POSITIVE EDGE	-40 Cel		DUAL	32 MHz	R-PDIP-T16	NOT APPLICABLE	15 V	4.7 mm	7.62 mm	Not Qualified	3 V	TCO OUTPUT; GATED CLOCK		40	245	21.6 mm	4000/14000/40000
74HCT4510D-T	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	YES		5		50 pF	SMALL OUTLINE		SYNCHRONOUS	75 ns				125 Cel	BIDIRECTIONAL	POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V			Not Qualified	4.5 V	TCO OUTPUT					HCT
HEF4526BPB	NXP Semiconductors	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		4	YES		5		50 pF	IN-LINE		SYNCHRONOUS	300 ns			2.54 mm	85 Cel	DOWN	POSITIVE EDGE	-40 Cel		DUAL	6 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	3 V	TCO OUTPUT; GATED CLOCK					4000/14000/40000
74HC4020DB-T	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		14	YES		5		50 pF	SMALL OUTLINE, SHRINK PITCH		ASYNCHRONOUS	42 ns			.65 mm	125 Cel	UP	NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	2 V	OUTPUTS FROM 12 STAGES AVAILABLE	e4			6.2 mm	HC/UH
74HC4040DB-Q100	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	12	YES		5			SMALL OUTLINE, SHRINK PITCH		ASYNCHRONOUS	225 ns			.65 mm	125 Cel	UP	NEGATIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G16		6 V	2 mm	5.3 mm		2 V					6.2 mm	HC/UH
74HC4040DB,118	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		12	NO		5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	ASYNCHRONOUS	225 ns	4 Amp	Counters	.65 mm	125 Cel	UP	NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	2 V		e4	30	260	6.2 mm	HC/UH
74HCT390D-T	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS		3	YES		5		50 pF	SMALL OUTLINE		ASYNCHRONOUS	77 ns			1.27 mm	125 Cel	UP	NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	DIVIDE BY 2 AND DIVIDE BY 5 FUNCTIONS	e4			9.9 mm	HCT
74HCT160PW,118	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	YES		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		SYNCHRONOUS	65 ns			.65 mm	125 Cel	UP	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	11 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	4.5 V	TCO OUTPUT	e4			5 mm	HCT
74HC393D	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		4	NO	BULK	5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	ASYNCHRONOUS	190 ns	4 Amp	Counters	1.27 mm	125 Cel	UP	NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V		e4	30	260	8.65 mm	HC/UH
HEF4018BTD-T	NXP Semiconductors	RING COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		5	YES		5			SMALL OUTLINE		SYNCHRONOUS	370 ns			1.27 mm	85 Cel	UP	POSITIVE EDGE	-40 Cel		DUAL	16 MHz	R-PDSO-G16		15 V	1.75 mm	3.9 mm	Not Qualified	3 V	JOHNSON COUNTER, PROGRAMMABLE WITH EXT CONNECTIONS; SCHMITT TRIGGER ON CLOCK INPUT; INVERTED OUTPUTS				9.9 mm	4000/14000/40000
74HC390N	NXP Semiconductors	DECADE COUNTER	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4	20000000 Hz	CMOS		3	NO		5	2/6	50 pF	IN-LINE	DIP16,.3	ASYNCHRONOUS	63 ns	4 Amp	Counters	2.54 mm	125 Cel	UP	NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		6 V	4.7 mm	7.62 mm	Not Qualified	2 V	DIVIDE BY 2 AND DIVIDE BY 5 FUNCTIONS	e4			21.6 mm	HC/UH
74HCT93N	NXP Semiconductors	BINARY COUNTER	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	20000000 Hz	CMOS		3	NO		5	5	50 pF	IN-LINE	DIP14,.3	ASYNCHRONOUS	87 ns	4 Amp	Counters	2.54 mm	125 Cel	UP	NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T14		5.5 V	4.2 mm	7.62 mm	Not Qualified	4.5 V	DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONS	e4			19.025 mm	HCT

Digital Counters

Digital counters are electronic circuits that can be used to count and keep track of the number of events or occurrences in a digital system. They are commonly used in digital systems to generate timing signals, to control sequencing, and to implement digital control functions.

Digital counters can be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs). They can also be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops.

Digital counters can be classified into two main types: synchronous counters and asynchronous counters. Synchronous counters use a common clock signal to synchronize the operation of all the flip-flops in the counter. Asynchronous counters, on the other hand, do not use a common clock signal and rely on the propagation delay of the flip-flops to sequence their operation.

Digital counters can also be classified based on their counting sequence. They can count up, down, or both up and down, depending on the application. Up counters increment the count each time an input pulse is received, while down counters decrement the count each time an input pulse is received. Up-down counters can count both up and down, depending on the direction of the input signal.

Digital counters can be used in various applications, including frequency division, time delay generation, event counting, and sequence control. They can be used to generate timing signals for clocking digital circuits, to control the sequencing of operations in a digital system, and to implement digital control functions, such as shift registers and sequence generators.